journal article·2024-04-04Open access

Advancing 3D Dental Implant Finite Element Analysis: Incorporating Biomimetic Trabecular Bone with Varied Pore Sizes in Voronoi Lattices

Dawit Bogale Alemayehu, Masahiro Todoh, Song-Jeng Huang

Abstract

The human mandible’s cancellous bone, which is characterized by its unique porosity and directional sensitivity to external forces, is crucial for sustaining biting stress. Traditional computer- aided design (CAD) models fail to fully represent the bone’s anisotropic structure and thus depend on simple isotropic assumptions. For our research, we use the latest versions of nTOP 4.17.3 and Creo Parametric 8.0 software to make biomimetic Voronoi lattice models that accurately reflect the complex geometry and mechanical properties of trabecular bone. The porosity of human cancellous bone is accurately modeled in this work using biomimetic Voronoi lattice models. The porosities range from 70% to 95%, which can be achieved by changing the pore sizes to 1.0 mm, 1.5 mm, 2.0 mm, and 2.5 mm. Finite element analysis (FEA) was used to examine the displacements, stresses, and strains acting on dental implants with a buttress thread, abutment, retaining screw, and biting load surface. The results show that the Voronoi model accurately depicts the complex anatomy of the trabecular bone in the human jaw, compared to standard solid block models. The ideal pore size for biomimetic Voronoi lattice trabecular bone models is 2 mm, taking in to account both the von Mises stress distribution over the dental implant, screw retention, cortical bone, cancellous bone, and micromotions. This pore size displayed balanced performance by successfully matching natural bone’s mechanical characteristics. Advanced FEA improves the biomechanical understanding of how bones and implants interact by creating more accurate models of biological problems and dynamic loading situations. This makes biomechanical engineering better.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University, Sapporo 060-8628, Japan

Division of Mechanical and Aerospace Engineering, Faculty of Engineering, Hokkaido University, Sapporo 060-8628, Japan

Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan

Funding

National Science and Technology Council (Taiwan) · MEXT Grant-in-Aid for Scientific Research (A)

References (84)

Show source-provided references
1. Finite Element Analysis of a Three-Dimensional Open-Celled Model for Trabecular Bone10.1115/1.3138550 ↗
2. Additively Manufactured Medical Bone Screws: An Initial Study to Investigate the Impact of Lattice-Based Voronoi Structure on Implant Primary Stability10.1108/RPJ-10-2022-0363 ↗
3. Alkentar, R., Kladovasilakis, N., Tzetzis, D., and Mankovits, T. (2023). Effects of Pore Size Parameters of Titanium Additively Manufactured Lattice Structures on the Osseointegration Process in Orthopedic Applications: A Comprehensive Review. Crystals, 13.10.3390/cryst13010113 ↗
4. Sivakumar, N.K., Palaniyappan, S., Sekar, V., Alodhayb, A., and Braim, M. (2023). An Optimization Approach for Studying the Effect of Lattice Unit Cell’s Design-Based Factors on Additively Manufactured Poly Methyl Methacrylate Cranio-Implant. J. Mech. Behav. Biomed. Mater., 141.10.1016/j.jmbbm.2023.105791 ↗
5. Design and Statistical Analysis of Irregular Porous Scaffolds for Orthopedic Reconstruction Based on Voronoi Tessellation and Fabricated via Selective Laser Melting (SLM)10.1016/j.matchemphys.2019.121968 ↗
6. Zhou, Y., Isaksson, P., and Persson, C. (2023). An Improved Trabecular Bone Model Based on Voronoi Tessellation. J. Mech. Behav. Biomed. Mater., 148.10.1016/j.jmbbm.2023.106172 ↗
7. Additively Manufactured Multilevel Voronoi-Lattice Scaffolds with Bonelike Mechanical Properties10.1021/acsbiomaterials.1c01482 ↗
8. A Novel Method to Design Biomimetic, 3D Printable Stochastic Scaffolds with Controlled Porosity for Bone Tissue Engineering10.1016/j.matdes.2022.110857 ↗
9. Li, J., Yang, Y., Sun, Z., Peng, K., Liu, K., Xu, P., Li, J., Wei, X., and He, X. (2024). Integrated Evaluation of Biomechanical and Biological Properties of the Biomimetic Structural Bone Scaffold: Biomechanics, Simulation Analysis, and Osteogenesis. Mater. Today Bio, 24.10.1016/j.mtbio.2023.100934 ↗
10. Additive Manufactured Trabecular-like Ti-6Al-4V Scaffolds for Promoting Bone Regeneration10.1016/j.jmst.2023.10.061 ↗
11. He, L., Zhao, M., Cheung, J.P.Y., Zhang, T., and Ren, X. (2024). Gaussian Random Field-Based Characterization and Reconstruction of Cancellous Bone Microstructure Considering the Constraint of Correlation Structure. J. Mech. Behav. Biomed. Mater., 152.10.1016/j.jmbbm.2024.106443 ↗
12. Vat Photopolymerization Additive Manufacturing Technology for Bone Tissue Engineering Applications10.1002/adem.202200859 ↗
13. Leveraging the Recent Advancements in GelMA Scaffolds for Bone Tissue Engineering: An Assessment of Challenges and Opportunities
14. Design, Fabrication, and Characterization of 3D-Printed ABS and PLA Scaffolds Potentially for Tissue Engineering10.1016/j.rineng.2023.101685 ↗
15. Wu, J., Zhang, Y., Lyu, Y., and Cheng, L. (2023). On the Various Numerical Techniques for the Optimization of Bone Scaffold. Materials, 16.10.3390/ma16030974 ↗
16. Non-Negligible Role of Gradient Porous Structure in Superelasticity Deterioration and Improvement of NiTi Shape Memory Alloys10.1016/j.jmst.2023.10.053 ↗
17. Some Basic Relationships between Density Values in Cancellous and Cortical Bone10.1016/j.jbiomech.2008.03.025 ↗
18. Abdullah, N.N.A.A., Abdullah, A.H., and Ramlee, M.H. (2023). Current Trend of Lattice Structures Designed and Analysis for Porous Hip Implants: A Short Review. Mater. Today Proc.10.1016/j.matpr.2023.09.199 ↗
19. Ataollahi, S. (2023). A Review on Additive Manufacturing of Lattice Structures in Tissue Engineering. Bioprinting, 35.10.1016/j.bprint.2023.e00304 ↗
20. Rezapourian, M., and Hussainova, I. (2023). Optimal Mechanical Properties of Hydroxyapatite Gradient Voronoi Porous Scaffolds for Bone Applications—A Numerical Study. J. Mech. Behav. Biomed. Mater., 148.10.1016/j.jmbbm.2023.106232 ↗
21. Salaha, Z.F.M., Ammarullah, M.I., Abdullah, N.N.A.A., Aziz, A.U.A., Gan, H.-S., Abdullah, A.H., Abdul Kadir, M.R., and Ramlee, M.H. (2023). Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model. Materials, 16.10.3390/ma16093298 ↗
22. Structural and Topological Design of Conformal Bilayered Scaffolds for Bone Tissue Engineering10.1016/j.tws.2023.111209 ↗
23. Atashipour, S.R., and Baqersad, J. (2024). Noninvasive Identification of Directionally-Dependent Elastic Properties of Soft Tissues Using Full-Field Optical Data. J. Mech. Behav. Biomed. Mater., 151.10.1016/j.jmbbm.2023.106266 ↗
24. A Density-Dependent Target Stimulus for Inverse Bone (Re) Modeling with Homogenized Finite Element Models10.1007/s10439-022-03104-x ↗
25. Isotropic Cellular Structure Design Strategies Based on Triply Periodic Minimal Surfaces
26. Decoding Bone-Inspired and Cell-Instructive Cues of Scaffolds for Bone Tissue Engineering
27. Elastically Anisotropic Architected Metamaterials with Enhanced Energy Absorption10.1016/j.tws.2023.111115 ↗
28. Composite Material Consisting of Microporous Beta-TCP Ceramic and Alginate-Dialdehyde-Gelatin for Controlled Dual Release of Clindamycin and Bone Morphogenetic Protein 210.1007/s10856-023-06743-1 ↗
29. Biomechanical Behavior and Weibull Survival of CAD-CAM Endocrowns with Different Marginal Designs: A 3D Finite Element Analysis10.1016/j.dental.2023.11.012 ↗
30. Evaluation of Stress Distribution on an Endodontically Treated Maxillary Central Tooth with Lesion Restored with Different Crown Materials: A Finite Element Analysis10.1016/j.heliyon.2024.e25829 ↗
31. Biomechanical Behavior of a New Design of Dental Implant: Influence of the Porosity and Location in the Maxilla10.1016/j.jmrt.2024.02.091 ↗
32. Alemayehu, D.-B., and Jeng, Y.-R. (2021). Three-Dimensional Finite Element Investigation into Effects of Implant Thread Design and Loading Rate on Stress Distribution in Dental Implants and Anisotropic Bone. Materials, 14.10.20944/preprints202109.0221.v1 ↗
33. Evaluation of the Biological Behaviour of Various Dental Implant Abutment Materials on Attachment and Viability of Human Gingival Fibroblasts10.1016/j.dental.2019.04.010 ↗
34. Effect of Increased Crown Height on Stress Distribution in Short Dental Implant Components and Their Surrounding Bone: A Finite Element Analysis10.1016/j.prosdent.2014.11.007 ↗
35. Static, Dynamic and Fatigue Behaviors of Dental Implant Using Finite Element Method10.1016/j.advengsoft.2006.02.004 ↗
36. Finite Element Analysis of Dental Implants with and without Microthreads under Static and Dynamic Loading10.1615/JLongTermEffMedImplants.2017020007 ↗
37. Finite Element Analysis of Stress at Implant–Bone Interface of Dental Implants with Different Structures10.1016/S1003-6326(11)60903-5 ↗
38. Cheng, Y.-J., Wu, T.-H., Tseng, Y.-S., and Chen, W.-F. (2024). Development of Hybrid 3D Printing Approach for Fabrication of High-Strength Hydroxyapatite Bioscaffold Using FDM and DLP Techniques. Biofabrication, 16.10.1088/1758-5090/ad1b20 ↗
39. He, S., Zhu, J., Jing, Y., Long, S., Tang, L., Cheng, L., and Shi, Z. (2024). Effect of 3D-Printed Porous Titanium Alloy Pore Structure on Bone Regeneration: A Review. Coatings, 14.10.3390/coatings14030253 ↗
40. Wang, Z., Liao, B., Liu, Y., Liao, Y., Zhou, Y., and Li, W. (2024). Influence of Structural Parameters of 3D-printed Triply Periodic Minimal Surface Gyroid Porous Scaffolds on Compression Performance, Cell Response, and Bone Regeneration. J. Biomed. Mater. Res. Part B Appl. Biomater., 112.10.1002/jbm.b.35337 ↗
41. Ashby, M.F., and Gibson, L.J. (1997). Cellular Solids: Structure and Properties, Press Syndicate of the University of Cambridge.
42. Distefano, F., Pasta, S., and Epasto, G. (2023). Titanium Lattice Structures Produced via Additive Manufacturing for a Bone Scaffold: A Review. J. Funct. Biomater., 14.10.3390/jfb14030125 ↗
43. Effective Design and Mechanical Response of Gyroid Lattice Scaffold for Orthopedic Implants10.1016/j.mfglet.2023.07.015 ↗
44. A Finite Element Investigation on the Design of Mechanically Compatible Functionally Graded Orthopaedic Plate for Diaphyseal Tibia Transverse Fracture10.1016/j.jcomc.2022.100228 ↗
45. Mechanical Property of Ti6Al4V Cylindrical Porous Structure for Dental Implants Fabricated by Selective Laser Melting
46. Full Compression Response of FG-Based Scaffolds with Varying Porosity via an Effective Numerical Scheme10.1016/j.ijmecsci.2022.107294 ↗
47. Rezapourian, M., Kamboj, N., Jasiuk, I., and Hussainova, I. (2022). Journal of the Mechanical Behavior of Biomedical Materials Biomimetic Design of Implants for Long Bone Critical-Sized Defects. J. Mech. Behav. Biomed. Mater., 134.10.1016/j.jmbbm.2022.105370 ↗
48. Additive Manufacturing and Mechanical Characterization of Graded Porosity Scaffolds Designed Based on Triply Periodic Minimal Surface Architectures10.1016/j.jmbbm.2016.05.027 ↗
49. Kladovasilakis, N., Tsongas, K., and Tzetzis, D. (2020). Finite Element Analysis of Orthopedic Hip Implant with Functionally Graded Bioinspired Lattice Structures. Biomimetics, 5.10.3390/biomimetics5030044 ↗
50. Cantó-Navés, O., Medina-Galvez, R., Marimon, X., Ferrer, M., Figueras-Álvarez, Ó., and Cabratosa-Termes, J. (2021). A 3D Finite Element Analysis Model of Single Implant-Supported Prosthesis under Dynamic Impact Loading for Evaluation of Stress in the Crown, Abutment and Cortical Bone Using Different Rehabilitation Materials. Materials, 14.10.3390/ma14133519 ↗
51. Trabecular Surface Remodeling Simulation for Cancellous Bone Using Microstructural Voxel Finite Element Models10.1115/1.1392315 ↗
52. Investigating the Influence of All-Ceramic Prosthetic Materials on Implants and Their Effect on the Surrounding Bone: A Finite Element Analysis10.3390/prosthesis6010006 ↗
53. Elastic Properties of Cancellous Bone Derived from Finite Element Models of Parameterized Microstructure Cells10.1016/S0021-9290(03)00065-4 ↗
54. Effects of Diameters of Implant and Abutment Screw on Stress Distribution within Dental Implant and Alveolar Bone: A Three-Dimensional Finite Element Analysis10.1016/j.jds.2023.12.020 ↗
55. Finite Element Analysis of Trabecular Bone Structure: A Comparison of Image-Based Meshing Techniques10.1016/S0021-9290(98)00118-3 ↗
56. The Finite Element Method for Micro-Scale Modeling of Ultrasound Propagation in Cancellous Bone10.1016/j.ultras.2014.02.024 ↗
57. Effect of Bone Mass Density and Alveolar Bone Resorption on Stress in Implant Restoration of Free-End Edentulous Posterior Mandible: Finite Element Analysis of Double-Factor Sensitivity10.1016/j.aanat.2024.152210 ↗
58. Effects of the Internal Contact Surfaces of Dental Implants on Screw Loosening: A 3-Dimensional Finite Element Analysis10.1016/j.prosdent.2023.07.007 ↗
59. Finite Element Analysis in Implant Dentistry: State of the Art and Future Directions10.1016/j.dental.2023.04.002 ↗
60. Mishra, D., and Basu, B. (2024). Biomechanical Analysis of Peri-Prosthetic Bone Response to Hybrid Threaded Zirconia Dental Implants: An in Silico Model. J. Mech. Behav. Biomed. Mater., 150.10.1016/j.jmbbm.2023.106310 ↗
61. The Effect of Porous Compliance Bushings in a Dental Implant on the Distribution of Occlusal Loads10.1038/s41598-024-51429-5 ↗
62. A Comprehensive Biomechanical Evaluation of Length and Diameter of Dental Implants Using Finite Element Analyses: A Systematic Review10.1016/j.heliyon.2024.e26876 ↗
63. Wang, P.-S., Tsai, M.-H., Wu, Y.-L., Chen, H.-S., Lei, Y.-N., and Wu, A.Y.-J. (2023). Biomechanical Analysis of Titanium Dental Implants in the All-on-4 Treatment with Different Implant–Abutment Connections: A Three-Dimensional Finite Element Study. J. Funct. Biomater., 14.10.3390/jfb14100515 ↗
64. Liu, F., Chen, J., Wang, Y., Luo, T., Zhang, X., Wang, X., Bian, X., and Xie, H. (2024, February 28). Multicomponent Functional Scaffolds with Multiscale Porosity to Improve Biomimetic and Mechanical Properties. Preprint Article, Available SSRN 4725552. Available online: https://ssrn.com/abstract=4725552.10.2139/ssrn.4725552 ↗
65. The Effect of Pore Size and Layout on Mechanical and Biological Properties of 3D-printed Bone Scaffolds with Gradient Porosity10.1002/pc.27174 ↗
66. Effect of Hot Isostatic Pressing Treatment on Porosity Reduction and Mechanical Properties Enhancement of 316L Stainless Steel Fabricated by Binder Jetting10.1080/17452759.2023.2174703 ↗
67. A New Attempt to Control Volatile Organic Compounds (VOCs) Pollution-Modification Technology of Biomass for Adsorption of VOCs Gas10.1016/j.envpol.2023.122451 ↗
68. Assessing the Compressive and Tensile Properties of TPMS-Gyroid and Stochastic Ti64 Lattice Structures: A Study on Laser Powder Bed Fusion Manufacturing for Biomedical Implants10.1016/j.jsamd.2023.100663 ↗
69. Evaluating the Effect of Pore Size for 3d-Printed Bone Scaffolds10.1016/j.heliyon.2024.e26005 ↗
70. The Effect of Pore Size on the Mechanical Properties, Biodegradation and Osteogenic Effects of Additively Manufactured Magnesium Scaffolds after High Temperature Oxidation: An in Vitro and in Vivo Study
71. Artificial Intelligence in the Design of Innovative Metamaterials: A Comprehensive Review10.1007/s12541-023-00857-w ↗
72. The Compressiv Berhaviour of Bone as a Two-Phase Porous Material10.2106/00004623-197759070-00021 ↗
73. Stiffness of Compact Bone: Effects of Porosity and Density10.1016/0021-9290(88)90186-8 ↗
74. The Mechanical Behaviour of Cancellous Bone10.1016/0021-9290(85)90287-8 ↗
75. Impact of Dynamic and Static Load on Bone Around Implants: An Experimental Study in a Rat Model10.11607/jomi.4372 ↗
76. Time-Frequency Analysis of Chewing Activity in the Natural Environment10.1177/0022034511416669 ↗
77. Finite Element Analysis for Interfacial Stress and Fatigue Behaviors of Biomimetic Titanium Implant under Static and Dynamic Loading Conditions
78. Lv, X., Wang, S., Xu, Z., Liu, X., Liu, G., Cao, F., and Ma, Y. (2023). Structural Mechanical Properties of 3D Printing Biomimetic Bone Replacement Materials. Biomimetics, 8.10.3390/biomimetics8020166 ↗
79. Tribotechnical Characteristics of Commercially Pure Titanium with Different Grain Sizes and TiC and TiO2 Coatings10.3103/S1068366619040111 ↗
80. Alemayehu, D.B., Todoh, M., Hsieh, J.-H., Li, C., and Huang, S.-J. (2023). Improving Pure Titanium’s Biological and Mechanical Characteristics through ECAP and Micro-Arc Oxidation Processes. Micromachines, 14.10.20944/preprints202306.0173.v1 ↗
81. Bacterial Cellulose: A Comprehensive Review10.1002/app.55163 ↗
82. Mudigonda, J. (2024). Advances in 3D Bioprinting, CRC Press.
83. Randhawa, A., Dutta, S.D., Ganguly, K., Patil, T.V., and Lim, K. (2024). Manufacturing 3D Biomimetic Tissue: A Strategy Involving the Integration of Electrospun Nanofibers with a 3D-Printed Framework for Enhanced Tissue Regeneration. Small, 2309269.10.1002/smll.202309269 ↗
84. Thakur, A., and Kumar, A. (2024). Innovations and Applications of Hybrid Nanomaterials, IGI Global.