journal article·2024-04-01Open access

Synthesis of Alginate/Collagen Bioink for Bioprinting Respiratory Tissue Models

Amanda Zimmerling, Yan Zhou, Xiongbiao Chen

Abstract

Synthesis of bioinks for bioprinting of respiratory tissue requires considerations related to immunogenicity, mechanical properties, printability, and cellular compatibility. Biomaterials can be tailored to provide the appropriate combination of these properties through the synergy of materials with individual pros and cons. Sodium alginate, a water-soluble polymer derived from seaweed, is a cheap yet printable biomaterial with good structural properties; however, it lacks physiological relevance and cell binding sites. Collagen, a common component in the extra cellular matrix of many tissues, is expensive and lacks printability; however, it is highly biocompatible and exhibits sites for cellular binding. This paper presents our study on the synthesis of bioinks from alginate and collagen for use in bioprinting respiratory tissue models. Bioinks were synthesized from 40 mg/mL (4%) alginate and 3 mg/mL (0.3%) collagen in varying ratios (1:0, 4:1, 3:1, 2:1, and 1:1); then examined in terms of rheological properties, printability, compressive, and tensile properties and cellular compatibility. The results illustrate that the ratio of alginate to collagen has a profound impact on bioink performance and that, among the examined ratios, the 3:1 ratio is the most appropriate for use in bioprinting respiratory tissue scaffolds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Innovative Microfluidic and Catalytic Techniques Innovation · Cancer Cells and Metastasis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Dr., Saskatoon, SK S7N 5A9, Canada

Vaccine and Infectious Disease Organization (VIDO), University of Saskatchewan, Saskatoon, SK S7N 5E3, Canada

Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada

Funding

University of Saskatchewan Dean’s Scholarship and an NSERC CGS-D · Natural Science and Engineering Research Council of Canada (NSERC) · Government of Saskatchewan · Canada Foundation for Innovation

References (30)

Show source-provided references
1. Bioprinted constructs for respiratory tissue engineering10.1016/j.bprint.2021.e00177 ↗
2. Biomaterials/bioinks and extrusion bioprinting
3. Fatimi, A., Okoro, O., Podstawczyk, D., Siminska-Stanny, J., and Shavandi, A. (2022). Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review. Gels, 8.10.3390/gels8030179 ↗
4. Collagen-based bioinks for hard tissue engineering applications: A comprehensive review10.1007/s10856-019-6234-x ↗
5. Las-Casa, B., Dias, I., Yupanqui-Mendoza, S., Pereira, B., Costa, G., Rojas, O., and Arantes, V. (2023). The emergence of hybrid cellulose nanomaterials as promising biomaterials. Int. J. Biol. Macromol., 250.10.1016/j.ijbiomac.2023.126007 ↗
6. Petroni, S., Tagliaro, I., Antonini, C., D’Arienzo, M., Orsini, S., Mano, J., Brancato, V., Borges, J., and Cipolla, L. (2023). Chitosan-Based Biomaterials: Insights into Chemistry, Properties, Devices, and Their Biomedical Applications. Mar. Drugs, 21.10.3390/md21030147 ↗
7. Vach Agocsova, S., Culenova, M., Birova, I., Omanikova, L., Moncmanova, B., Danisovic, L., Ziaran, S., Bakos, D., and Alexy, P. (2023). Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review. Materials, 16.10.3390/ma16124267 ↗
8. Axpe, E., and Oyen, M. (2016). Applications for alginate-based bioinks in 3D bioprinting. Int. J. Mol. Sci., 17.10.3390/ijms17121976 ↗
9. Modeling the flow behaviour and flow rate of medium viscosity alginate for scaffold fabircation with three-dimensional bioplotter10.1115/1.4036226 ↗
10. Influence of crosslinking on the mechanical behaviour of 3D printed alginate scaffolds: Experimental and numerical approaches10.1016/j.jmbbm.2018.01.034 ↗
11. 3D bioprinted alginate-gelatin based scaffolds for soft tissue engineering10.1016/j.ijbiomac.2019.12.127 ↗
12. Alginate-Based Bioinks for 3D Bioprinting and Fabrication of Anatomically Accurate Bone Grafts
13. Roche, C., Sharma, P., Ashton, A., Jackson, C., Xue, M., and Gentile, C. (2021). Printability, Durability, Contractility and Vascular Network Formation in 3D Bioprinted Cardiac Endothelial Cells Using Alginate–Gelatin Hydrogels. Front. Bioeng. Biotechnol., 9.10.31219/osf.io/ct6rk ↗
14. Amirrah, I., Lokanathan, Y., Zulkiflee, I., Wee, M., Motta, A., and Fauzi, M. (2022). Comprehensive Review on Collagen Type I Development of Biomaterials for Tissue Engineering: From Biosynthesis to Bioscaffold. Biomedicines, 10.10.3390/biomedicines10092307 ↗
15. Silk fibroin/collagen protein hybrid cell-encapsulating hydrogels with tunable gelation and improved physical and biological properties10.1016/j.actbio.2017.12.026 ↗
16. Bai, X., Zheng, H., Fang, R., Wang, T., Hou, X., Li, Y., Chen, X., and Tian, W. (2011). Fabrication of engineered heart tissue grafts from alginate/collagen barium composite microbeads. Biomed. Mater., 6.10.1088/1748-6041/6/4/045002 ↗
17. Song, Y., Hua, S., Sayyar, S., Chen, Z., Chung, J., Liu, X., Yue, Z., Angus, C., Filippi, B., and Beirne, S. (2022). Corneal bioprinting using a high concentration pure collagen I transparent bioink. Bioprinting, 28.10.1016/j.bprint.2022.e00235 ↗
18. Thermally-controlled extrusion-based bioprinting of collagen10.1007/s10856-019-6258-2 ↗
19. 3D bioprinting and microscale organization of vascularized tissue constructs using collagen-based bioink10.1002/bit.27838 ↗
20. Respiratory Tissue Engineering: Current Status and Opportunities for the Future10.1089/ten.teb.2014.0525 ↗
21. Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering10.1016/j.msec.2017.09.002 ↗
22. Kim, S., Jin, S., Kim, S., Son, D., and Shin, M. (2022). Tyramine-Functionalized Alginate-Collagen Hybrid Hydrogel Inks for 3D-Bioprinting. Polymers, 14.10.3390/polym14153173 ↗
23. Yao, R., Alkhawtani, A., Chen, R., Luan, J., and Xu, M. (2019). Rapid and efficient in vivo angiogenesis directed by electro-assisted bioprinting of alginate/collagen microspheres with human umbilical vein endothelial cell coating layer. Int. J. Bioprint., 5.10.18063/ijb.v5i2.194 ↗
24. Zimmerling, A., Vincent, M., Sunil, C., Boire, J., and Chen, X. (2024, March 28). Influence of Material Concentration and Scaffold Design on the Tensile Properties of 3d Printed Alginate Scaffolds. Available online: https://ssrn.com/abstract=4236168.
25. Hu, T., and Lo, A. (2021). Collagen–Alginate Composite Hydrogel: Application in Tissue Engineering and Biomedical Sciences. Polymers, 13.10.3390/polym13111852 ↗
26. Sodium alginate/collagen hydrogel loaded with human umbilical cord mesenchymal stem cells promotes wound healing and skin cord mesenchymal stem cells promotes wound healing and skin remodeling10.1007/s00441-020-03321-7 ↗
27. Sodium alginate/collagen/stromal cell-derived factor-1 neural scaffold loaded with BMSCs promotes neurological function recovery after traumatic brain injury10.1016/j.actbio.2021.06.038 ↗
28. Preparing an injectable hydrogel with sodium alginate and Type I collagen to create better MSCs growth microenvironment10.1515/epoly-2019-0011 ↗
29. Hwang, J., An, E., Zhang, W., Kim, H., Eom, Y., and Jin, J. (2022). Dual-functional alginate and collagen–based injectable hydrogel for the treatment of cancer and its metastasis. J. Nanobiotechnol., 20.10.1186/s12951-022-01458-x ↗
30. Assembly of collagen fibrillar networks in the presence of alginate10.1016/j.carbpol.2010.07.005 ↗