journal article·2023-05-24Open access

Influence of Individual Bracket Base Design on the Shear Bond Strength of In-Office 3D Printed Brackets—An In Vitro Study

Lutz D. Hodecker, Mats Scheurer, Sven Scharf, Christoph J. Roser, Ahmed M. Fouda, Christoph Bourauel, Christopher J. Lux, Carolien A. J. Bauer

Abstract

(1) Background: Novel high-performance polymers for medical 3D printing enable in-office manufacturing of fully customized brackets. Previous studies have investigated clinically relevant parameters such as manufacturing precision, torque transmission, and fracture stability. The aim of this study is to evaluate different design options of the bracket base concerning the adhesive bond between the bracket and tooth, measured as the shear bond strength (SBS) and maximum force (Fmax) according to DIN 13990. (2) Methods: Three different designs for printed bracket bases were compared with a conventional metal bracket (C). The following configurations were chosen for the base design: Matching of the base to the anatomy of the tooth surface, size of the cross-sectional area corresponding to the control group (C), and a micro- (A) and macro- (B) retentive design of the base surface. In addition, a group with a micro-retentive base (D) matched to the tooth surface and an increased size was studied. The groups were analyzed for SBS, Fmax, and adhesive remnant index (ARI). The Kruskal–Wallis test with a post hoc test (Dunn–Bonferroni) and Mann–Whitney U test were used for statistical analysis (significance level: p < 0.05). (3) Results: The values for SBS and Fmax were highest in C (SBS: 12.0 ± 3.8 MPa; Fmax: 115.7 ± 36.6 N). For the printed brackets, there were significant differences between A and B (A: SBS 8.8 ± 2.3 MPa, Fmax 84.7 ± 21.8 N; B: SBS 12.0 ± 2.1 MPa, Fmax 106.5 ± 20.7 N). Fmax was significantly different for A and D (D: Fmax 118.5 ± 22.8 N). The ARI score was highest for A and lowest for C. (4) Conclusions: This study shows that conventional brackets form a more stable bond with the tooth than the 3D-printed brackets. However, for successful clinical use, the shear bond strength of the printed brackets can be increased with a macro-retentive design and/or enlargement of the base.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Orthodontics and Dentofacial Orthopedics, University of Heidelberg, Im Neuenheimer Feld 400, 69120 Heidelberg, Germany

Department of Oral and Maxillofacial Surgery, University of Heidelberg, Im Neuenheimer Feld 400, 69120 Heidelberg, Germany

Private Practice of Orthodontics, 50933 Cologne, Germany

Oral Technology, Dental School, Medical Faculty, University Hospital of Bonn, Welschnonnenstr 17, 53111 Bonn, Germany

References (48)

Show source-provided references
1. Perception of esthetic orthodontic appliances: An eye tracking and cross-sectional study10.2319/031419-198.1 ↗
2. Comparative assessment of clinical performance of esthetic bracket materials10.2319/092511-605.1 ↗
3. Sliding resistance of polycarbonate self-ligating brackets and stainless steel esthetic archwires10.1016/j.pio.2011.10.004 ↗
4. Frictional properties of aesthetic brackets10.1093/ejo/cjm033 ↗
5. Evaluation of torque moment in esthetic brackets from bendable alloy wires10.2319/081820-729.1 ↗
6. Malkiewicz, K., Jastrzebska, A., Janas-Naze, A., Boryczko, W., and Bartczak, J. (2022). Assessment of the Susceptibility of Aesthetic Orthodontic Brackets to Discoloration. Coatings, 12.10.3390/coatings12081080 ↗
7. Changes in the reflected and transmitted color of esthetic brackets after thermal cycling10.1016/j.ajodo.2007.10.035 ↗
8. In vitro colour stability of aesthetic brackets10.1093/ejo/cjm020 ↗
9. The influence of bracket base design on the strength of the bracket-cement interface10.1179/ortho.27.3.249 ↗
10. Effect of temperature and humidity on the adhesive strength of orthodontic direct bonding materials10.1177/00220345750540010901 ↗
11. Shear bond strengths of orthodontic plastic brackets10.1016/S0889-5406(00)70163-6 ↗
12. Laboratory evaluation of modern plastic brackets10.1093/ejo/cjr063 ↗
13. Enamel alterations from bracket bonding and debonding: A study with the scanning electron microscope10.1016/S0002-9416(81)90462-0 ↗
14. The shear bond strengths of stainless steel and ceramic brackets used with chemically and light-activated composite resins10.1016/0889-5406(90)70084-P ↗
15. A Review of Direct Orthodontic Bonding10.1080/0301228X.1975.11743666 ↗
16. Adhesives for fixed orthodontic brackets
17. Comparison of shear bond strength of plastic and ceramic brackets10.1007/s00056-014-0236-6 ↗
18. The influence of enamel sandblasting on the shear bond strength and fractography of the bracket-adhesive-enamel complex tested in vitro by the DIN 13990:2017-04 standard10.1007/s00784-018-2692-7 ↗
19. Priming and bonding metal, ceramic and polycarbonate brackets
20. The influence of adhesives and the base structure of metal brackets on shear bond strength10.1007/s00056-012-0074-3 ↗
21. Urichianu, M., Makowka, S., Covell, D., Warunek, S., and Al-Jewair, T. (2022). Shear Bond Strength and Bracket Base Morphology of New and Rebonded Orthodontic Ceramic Brackets. Materials, 15.10.3390/ma15051865 ↗
22. Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment10.1016/0002-9416(84)90190-8 ↗
23. (2017). Zahnheilkunde—Prüfverfahren für die Scherhaftfestigkeit Von Adhäsiven für kieferorthopädische Befestigungselemente (Standard No. DIN 13990:2017-04).
24. (1991). Water for Analytical Laboratory Use (Standard No. DIN ISO 3696:1991-06). Specification and Test Methods.
25. Grzebieluch, W., Kowalewski, P., Grygier, D., Rutkowska-Gorczyca, M., Kozakiewicz, M., and Jurczyszyn, K. (2021). Printable and Machinable Dental Restorative Composites for CAD/CAM Application-Comparison of Mechanical Properties, Fractographic, Texture and Fractal Dimension Analysis. Materials, 14.10.3390/ma14174919 ↗
26. Precision of slot widths and torque transmission of in-office 3D printed brackets: An in vitro study
27. (2018). Dentistry—Powered Polymerization Activators (Standard No. DIN EN ISO 10650:2018-12).
28. Shear bond strength of different adhesives tested in accordance with DIN 13990-1/-2 and using various methods of enamel conditioning10.1007/s00056-014-0281-1 ↗
29. Comparative evaluation of shear bond strength of orthodontic brackets bonded to three-dimensionally-printed and milled materials after surface treatment and artificial aging10.4041/kjod22.098 ↗
30. Orthodontic shear bond strength and ultimate load tests of CAD/CAM produced artificial teeth10.1007/s00784-022-04676-7 ↗
31. Nespoli, A., Passaretti, F., Szentmiklósi, L., Maróti, B., Placidi, E., Cassetta, M., Yada, R.Y., Farrar, D.H., and Tian, K.V. (2022). Biomedical NiTi and β-Ti Alloys: From Composition, Microstructure and Thermo-Mechanics to Application. Metals, 12.10.3390/met12030406 ↗
32. The Effect of Variation in Mesh-Base Design on the Shear Bond Strength of Orthodontic Brackets
33. The influence of orthodontic bracket base design on shear bond strength10.1016/S0889-5406(03)00311-1 ↗
34. Shear Bond Strength of Ceramic Brackets with Different Base Designs: Comparative In-vitro Study
35. Intraoral aging of orthodontic materials: The picture we miss and its clinical relevance10.1016/j.ajodo.2004.09.015 ↗
36. Structural conformation of in vitro and in vivo aged orthodontic elastomeric modules10.1093/ejo/21.6.649 ↗
37. Inadequate shear bond strengths of self-etch, self-adhesive systems for secure orthodontic bonding10.4012/dmj.2012-103 ↗
38. Debonding forces of three different customized bases of a lingual bracket system10.4041/kjod.2013.43.5.235 ↗
39. Adhesive systems for CAD-CAM customised lingual orthodontic brackets: Which one is better?
40. Factors Affecting the Shear Bond Strength of Orthodontic Brackets—A Review of In Vitro Studies
41. Comparison of initial shear bond strengths of plastic and metal brackets10.1093/ejo/26.5.531 ↗
42. Effects of enamel sealing on shear bond strength and the adhesive remnant index: Study of three fluoride-releasing adhesives in combination with metal and ceramic brackets10.1007/s00056-016-0065-x ↗
43. Effects of plastic bracket primer on the shear bond strengths of orthodontic brackets10.1016/j.jds.2020.07.014 ↗
44. The influence of bracket design on moment production during axial rotation10.1016/S0889-5406(05)81727-5 ↗
45. Enamel microcracks in the form of tooth damage during orthodontic debonding: A systematic review and meta-analysis of in vitro studies10.1093/ejo/cjx102 ↗
46. Analysis of the torque capacity of a completely customized lingual appliance of the next generation10.1186/1746-160X-10-4 ↗
47. Correlation between orthodontic forces and root resorp-tion—A systematic review of the literature10.1515/jim-2016-0033 ↗
48. Prevalence of whitespot lesion formation during orthodontic treatment10.2319/071712-584.1 ↗