3D-Braided Poly-ε-Caprolactone-Based Scaffolds for Ligament Tissue Engineering
Source abstract
Abstract
The anterior cruciate ligament (ACL) is the most commonly injured intra-articular ligament of the knee. Due to its limited intrinsical healing potential and vascularization, injuries of the ACL do not heal satisfactorily, and surgical intervention is usually required. The limitations of existing reconstructive grafts and autologous transplants have prompted interest in tissue-engineered solutions. A tissue engineering scaffold for ACL reconstruction must be able to mimic the mechanical properties of the native ligament, provide sufficient porosity to promote cell growth of the neoligament tissue, and be biodegradable. This study investigates long-term biodegradable poly-ε-caprolactone (PCL)-based scaffolds for ACL replacement using the 3D hexagonal braiding technique. The scaffolds were characterized mechanically as well as morphologically. All scaffolds, regardless of their braid geometry, achieved the maximum tensile load of the native ACL. The diameter of all scaffolds was lower than that of the native ligament, making the scaffolds implantable with established surgical methods. The 3D hexagonal braiding technique offers a high degree of geometrical freedom and, thus, the possibility to develop novel scaffold architectures. Based on the findings of this study, the 3D-braided PCL-based scaffolds studied were found to be a promising construct for tissue engineering of the anterior cruciate ligament.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Knee injuries and reconstruction techniques · Polymer Surface Interaction Studies · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institut für Textiltechnik (ITA), RWTH Aachen University, 52074 Aachen, Germany
Funding
German Federal Ministry for Economic Affairs and Climate Action
References (58)
Show source-provided references
1. Epidemiology of knee injuries: Diagnosis and triage10.1136/bjsm.34.3.227-a ↗
2. The anterior cruciate ligament—110.1016/S0268-0890(03)00102-6 ↗
3. Regeneration of the anterior cruciate ligament: Current strategies in tissue engineering10.5312/wjo.v6.i1.127 ↗
4. Anterior Cruciate Ligament: Structure, Injuries and Regenerative Treatments10.1007/978-3-319-22345-2_10 ↗
5. Graft selection in anterior cruciate ligament revision surgery10.1097/00003086-199604000-00008 ↗
6. Anterior cruciate ligament reconstruction with synthetic grafts. A review of literature10.1007/s00264-010-0963-2 ↗
7. Analysis of retrieved polymer fiber based replacements for the ACL10.1016/S0142-9612(00)00114-9 ↗
8. Failure mechanisms of anterior cruciate ligament prostheses:In vitro wear study10.1002/(SICI)1097-4636(199724)38:4<370::AID-JBM10>3.0.CO;2-D ↗
9. Primary Stability of Interference Screw Fixation: Influence of Screw Diameter and Insertion Torque10.1177/036354659402200307 ↗
10. The strength of the anterior cruciate ligament in humans and Rhesus monkeys10.2106/00004623-197658080-00006 ↗
11. Tensile properties of the human femur-anterior cruciate ligament-tibia complex. The effects of specimen age and orientation10.1177/036354659101900303 ↗
12. Biomechanics of the anterior cruciate ligament and implications for surgical reconstruction10.1007/s11751-007-0016-6 ↗
13. Mechanical properties of the human anterior cruciate ligament10.1016/0268-0033(95)98193-X ↗
14. Silk matrix for tissue engineered anterior cruciate ligaments10.1016/S0142-9612(02)00156-4 ↗
15. Liu, X., Baldit, A., de Brosses, E., Velard, F., Cauchois, G., Chen, Y., Wang, X., de Isla, N., and Laurent, C. (2020). Characterization of Bone Marrow and Wharton’s Jelly Mesenchymal Stromal Cells Response on Multilayer Braided Silk and Silk/PLCL Scaffolds for Ligament Tissue Engineering. Polymers, 12.10.3390/polym12092163 ↗
16. Tissue engineering of ligaments10.1146/annurev.bioeng.6.040803.140037 ↗
17. Scaffolds in tissue engineering bone and cartilage10.1016/S0142-9612(00)00121-6 ↗
18. The effects of lactate and acid on articular chondrocytes function: Implications for polymeric cartilage scaffold design10.1016/j.actbio.2016.06.029 ↗
19. Gögele, C., Hahn, J., Elschner, C., Breier, A., Schröpfer, M., Prade, I., Meyer, M., and Schulze-Tanzil, G. (2020). Enhanced Growth of Lapine Anterior Cruciate Ligament-Derived Fibroblasts on Scaffolds Embroidered from Poly(l-lactide-co-ε-caprolactone) and Polylactic Acid Threads Functionalized by Fluorination and Hexamethylene Diisocyanate Cross-Linked Collagen Foams. Int. J. Mol. Sci., 21.10.3390/ijms21031132 ↗
20. Minimizing the time gap between service lifetime and complete resorption of degradable melt-spun multifilament fibers10.1016/j.polymdegradstab.2019.02.026 ↗
21. Characterization of a novel polymeric scaffold for potential application in tendon/ligament tissue engineering10.1089/ten.2006.12.91 ↗
22. Biomaterials and scaffolds for ligament tissue engineering10.1002/jbm.a.30578 ↗
23. Characterization of knitted polymeric scaffolds for potential use in ligament tissue engineering10.1163/1568562054798491 ↗
24. Van Dijkhuizen-Radersma, R., Moroni, L., van Apeldoorn, A., Zhang, Z., and Grijpma, D. (2008). Degradable polymers for tissue engineering. Tissue Engineering, Elsevier.10.1016/B978-0-12-370869-4.00007-0 ↗
25. Development of ligament tissue biodegradable devices: A review10.1016/j.jbiomech.2009.07.019 ↗
26. Structure, physical properties, biocompatibility and in vitro/vivo degradation behavior of anti-infective polycaprolactone-based electrospun membranes for guided tissue/bone regeneration10.1016/j.polymdegradstab.2014.07.017 ↗
27. Regenerative medicine and drug delivery: Progress via electrospun biomaterials10.1016/j.msec.2019.110521 ↗
28. The return of a forgotten polymer—Polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
29. Long-term hydrolytic degradation study of polycaprolactone films and fibers grafted with poly(sodium styrene sulfonate): Mechanism study and cell response10.1116/6.0000429 ↗
30. Gil-Castell, O., Badia, J.D., Bou, J., and Ribes-Greus, A. (2019). Performance of Polyester-Based Electrospun Scaffolds under In Vitro Hydrolytic Conditions: From Short-Term to Long-Term Applications. Nanomaterials, 9.10.3390/nano9050786 ↗
31. Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo10.1002/jbm.a.32052 ↗
32. Current tissue engineering strategies in anterior cruciate ligament reconstruction10.1002/jbm.a.34820 ↗
33. Adapting Mechanical Characterization of a Biodegradable Polymer to Physiological Approach of Anterior Cruciate Ligament Functions10.1016/j.irbm.2020.10.002 ↗
34. Control on molecular weight reduction of poly(ε-caprolactone) during melt spinning--a way to produce high strength biodegradable fibers10.1016/j.msec.2013.06.011 ↗
35. Bauer, B., Emonts, C., Bonten, L., Annan, R., Merkord, F., Vad, T., Idrissi, A., Gries, T., and Blaeser, A. (2022). Melt-Spun, Cross-Section Modified Polycaprolactone Fibers for Use in Tendon and Ligament Tissue Engineering. Fibers, 10.10.3390/fib10030023 ↗
36. Application of textile technology in tissue engineering: A review10.1016/j.actbio.2021.04.047 ↗
37. Fibrous Systems as Potential Solutions for Tendon and Ligament Repair, Healing, and Regeneration10.1002/adhm.202001305 ↗
38. Fiber-based tissue engineering: Progress, challenges, and opportunities10.1016/j.biotechadv.2012.11.007 ↗
39. Some recent advances in the fabrication and design of three-dimensional textile preforms: A review10.1016/S0266-3538(99)00093-7 ↗
40. Kyosev, Y. (2016). Advances in Braiding Technology: Specialized Techniques and Applications, Woodhead Publishing.
41. A multilayer braided scaffold for Anterior Cruciate Ligament: Mechanical modeling at the fiber scale10.1016/j.jmbbm.2012.03.005 ↗
42. Biofabrication and Signaling Strategies for Tendon/Ligament Interfacial Tissue Engineering10.1021/acsbiomaterials.0c00731 ↗
43. Fiber-based tissue-engineered scaffold for ligament replacement: Design considerations and in vitro evaluation10.1016/j.biomaterials.2004.05.014 ↗
44. Anterior cruciate ligament regeneration using braided biodegradable scaffolds: In vitro optimization studies10.1016/j.biomaterials.2004.11.050 ↗
45. Ligament Regenerative Engineering: Braiding Scalable and Tunable Bioengineered Ligaments Using a Bench-Top Braiding Machine10.1007/s40883-020-00178-8 ↗
46. Tissue Engineering of the Anterior Cruciate Ligament Using a Braid-Twist Scaffold Design10.1016/j.jbiomech.2006.09.025 ↗
47. Innovation in 3D Braiding Technology and Its Applications10.3390/textiles1020009 ↗
48. Schreiber, F. (2016). Three-dimensional hexagonal braiding. Advances in Braiding Technology, Elsevier.10.1016/B978-0-08-100407-4.00002-8 ↗
49. Schreiber, F., Theelen, K., Schulte Südhoff, E., Lee, H., Ko, F., and Gries, T. (2011, January 21–26). 3D-hexagonal braiding: Possibilities in near-net shape preform production for lightweight and medical applications. Proceedings of the 18th International Conference on Composite Materials, Jeju Island, Korea.
50. Klika, V. (2011). Biomechanics and Modeling of Skeletal Soft Tissues. Theoretical Biomechanics, IntechOpen.10.5772/816 ↗
51. Tensile response of braided structures: A review10.1177/0040517515576331 ↗
52. Impact of polyurethane yarns on the mechanical properties of braided artificial ligaments10.1080/00405000.2014.952964 ↗
53. Contribution to the optimisation of artificial ligament mechanical properties10.1080/00405000701414790 ↗
54. Tissue engineering a tendon-bone junction with biodegradable braided scaffolds10.1186/s40824-019-0160-3 ↗
55. A high-modulus polymer for porous orthopedic implants: Biomechanical compatibility of porous implants10.1002/jbm.820120508 ↗
56. Von Recum, A. (1986). Handbook of Biomaterials Evaluation: Scientific, Technical and Clinical Testing of Implant Materials, Macmillian.
57. Development of a single stage active tendon prosthesis. 1. Distal end attachment
58. Yahia, L.H. (1997). Ligaments and Ligamentoplasties, Springer.10.1007/978-3-642-60428-7 ↗