journal article·2025-03-10Open access

Changes in the Properties of Different Zones in Multilayered Translucent Zirconia Used in Monolithic Restorations During Aging Process

Phil-Joon Koo, Jong-Hyuk Lee, Seung-Ryong Ha, Deog-Gyu Seo, Jin-Soo Ahn, Yu-Sung Choi

Abstract

This study assessed the changes in the mechanical and surface properties of the transition zone in multilayered translucent monolithic zirconia subjected to long-term hydrothermal aging. A total of 360 disk-shaped specimens (diameter: 15.0 mm; thickness: 1.2 mm) were prepared using conventional (3Y-TZP in LT; ZL, 4Y-TZP in MT; ZM) and multilayered translucent zirconia (5Y-TZP in MT Multi; ZT, 3Y/5Y-TZP in Prime; ZP) among IPS e.max ZirCAD blocks. Specimens were divided into three groups (n = 30) and aged in the autoclave at 134 °C under 0.2 MPa for 0 h (control group), 5 h (first aged group), and 10 h (second aged group). The mechanical and surface properties of the transition zone in the multilayered translucent zirconia were investigated, followed by statistical analysis (α = 0.05). Before and after aging, ZL (1102.64 ± 41.37 MPa) and ZP (1014.71 ± 139.86 MPa) showed the highest biaxial flexural strength (BFS); ZL showed the highest Weibull modulus (31.46) and characteristic strength (1121.63 MPa); and ZT exhibited the highest nanoindentation hardness (20.40 ± 1.80 GPa) and Young’s modulus (284.90 ± 20.07 GPa). After aging, ZL (116.75 ± 9.80 nm) exhibited the highest surface roughness (Ra); the monoclinic phase contents in ZL and ZP increased; and surface uplifts, microcracks, and irregular defects caused by phase transformation appeared on ZL and ZP surfaces. The 3Y/5Y-TZP transition zone exhibited flexural strength, Vickers hardness, phase distribution changes, and surface microstructure changes similar to those of 3Y-TZP before and after aging; however, the surface roughness was lower than that of 3Y-TZP and higher than those of 4Y-TZP and 5Y-TZP after aging. The mechanical and surface characteristics, excluding BFS and Vickers hardness, were influenced by the yttrium oxide content in each zone and the aging process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prosthodontics, College of Dentistry, Dankook University, Cheonan 31116, Republic of Korea

Department of Conservative Dentistry, School of Dentistry and Dental Research Institute, Seoul National University, Seoul 03080, Republic of Korea

Department of Dental Biomaterials Science and Dental Research Institute, School of Dentistry, Seoul National University, Seoul 03080, Republic of Korea

Mechanobiology Dental Medicine Research Center, Dankook University, Cheonan 31116, Republic of Korea

Funding

National Research Foundation of Korea (NRF) · Medical Research Center Program

References (60)

Show source-provided references
1. What future for zirconia as a biomaterial?10.1016/j.biomaterials.2005.07.034 ↗
2. Optical properties of zirconia ceramics for esthetic dental restorations: A systematic review10.1016/j.prosdent.2017.07.009 ↗
3. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs10.1016/j.dental.2015.02.013 ↗
4. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs)10.1016/j.dental.2015.02.011 ↗
5. State of the art of zirconia for dental applications10.1016/j.dental.2007.05.007 ↗
6. A review on translucent zirconia
7. Stabilized zirconia as a structural ceramic: An overview10.1016/j.dental.2007.05.005 ↗
8. Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area10.1016/j.ceramint.2015.09.033 ↗
9. Making yttria-stabilized tetragonal zirconia translucent10.1016/j.dental.2014.08.375 ↗
10. Trade-off between fracture resistance and translucency of zirconia and lithium-disilicate glass ceramics for monolithic restorations10.1016/j.actbio.2019.04.043 ↗
11. Importance of tetragonal phase in high-translucent partially stabilized zirconia for dental restorations10.1016/j.dental.2020.01.017 ↗
12. Strength and aging resistance of monolithic zirconia: An update to current knowledge10.1016/j.jdsr.2019.09.002 ↗
13. Color Aspect of Monolithic Zirconia Restorations: A Review of the Literature10.1111/jopr.12906 ↗
14. Assessing flexural strength degradation of new cubic containing zirconia materials10.5005/jp-journals-10024-2762 ↗
15. Mechanical properties, translucency, and low temperature degradation (LTD) of yttria (3–6 mol%) stabilized zirconia10.1016/j.ceramint.2021.02.161 ↗
16. Amarante, J.E.V., Soares Pereira, M.V., De Souza, G.M., Pais Alves, M.F.R., Simba, B.G., and Santos, C.D. (2020). Effect of hydrothermal aging on the properties of zirconia with different levels of translucency. J. Mech. Behav. Biomed. Mater., 109.10.1016/j.jmbbm.2020.103847 ↗
17. Effect of artificial aging on high translucent dental zirconia: Simulation of early failure10.1111/eos.12739 ↗
18. Novel Zirconia Materials in Dentistry10.1177/0022034517737483 ↗
19. Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications10.1016/j.dental.2018.03.006 ↗
20. Translucent zirconia in the ceramic scenario for monolithic restorations: A flexural strength and translucency comparison test10.1016/j.jdent.2017.03.002 ↗
21. Comparison of the mechanical properties of translucent zirconia and lithium disilicate10.1016/j.prosdent.2017.08.004 ↗
22. A comparative evaluation of the translucency of zirconias and lithium disilicate for monolithic restorations10.1016/j.prosdent.2015.11.019 ↗
23. Optical properties of CAD-CAM monolithic systems compared: Three multi-layered zirconia and one lithium disilicate system10.1016/j.heliyon.2021.e08151 ↗
24. Michailova, M., Elsayed, A., Fabel, G., Edelhoff, D., Zylla, I.M., and Stawarczyk, B. (2020). Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sintering. J. Mech. Behav. Biomed. Mater., 111.10.1016/j.jmbbm.2020.103977 ↗
25. Influence of aging on flexural strength of translucent zirconia for monolithic restorations10.1016/j.prosdent.2016.06.010 ↗
26. Effect of hydrothermal treatment on light transmission of translucent zirconias10.1016/j.prosdent.2016.10.024 ↗
27. Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations10.1016/j.jmbbm.2018.05.029 ↗
28. Translucency of monolithic and core zirconia after hydrothermal aging10.3109/23337931.2015.1102639 ↗
29. Accelerated aging effects on color and translucency of flowable composites10.1111/jerd.12093 ↗
30. (2015). Implants for Surgery—Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia (Y-TZP) (Standard No. ISO 13356:2015). Available online: https://www.iso.org/standard/62373.html.
31. Mechanical properties of hybrid computer-aided design/computer-aided manufacturing (CAD/CAM) materials after aging treatments10.1016/j.ceramint.2018.07.146 ↗
32. Low-temperature aging of Y-TZP ceramics10.1111/j.1151-2916.1999.tb02055.x ↗
33. A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia10.1002/jbm.b.30123 ↗
34. Examination of surface and material properties of explanted zirconia femoral heads10.1016/j.arth.2004.06.017 ↗
35. Surface crystalline phases and nanoindentation hardness of explanted zirconia femoral heads10.1023/A:1025678525474 ↗
36. Concerns of hydrothermal degradation in CAD/CAM zirconia10.1177/0022034509354193 ↗
37. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations10.1016/j.dental.2016.09.025 ↗
38. Effect of hydrothermal aging on the optical properties of precolored dental monolithic zirconia ceramics10.1016/j.prosdent.2018.06.021 ↗
39. Effect of Aging Time and Thickness on Low-Temperature Degradation of Dental Zirconia10.1111/jopr.12946 ↗
40. New multi-layered zirconias: Composition, microstructure and translucency10.1016/j.dental.2019.02.017 ↗
41. Improvements in microstructural and mechanical properties of ZrO2 ceramics after addition of BaO10.1016/j.ceramint.2015.11.049 ↗
42. (2015). Dentistry—Ceramic Materials (Standard No. ISO 6872:2015). Available online: https://www.iso.org/standard/59936.html.
43. Inokoshi, M., Shimizubata, M., Nozaki, K., Takagaki, T., Yoshihara, K., Minakuchi, S., Vleugels, J., Van Meerbeek, B., and Zhang, F. (2021). Impact of sandblasting on the flexural strength of highly translucent zirconia. J. Mech. Behav. Biomed. Mater., 115.10.1016/j.jmbbm.2020.104268 ↗
44. Phase analysis in zirconia systems10.1111/j.1151-2916.1972.tb11290.x ↗
45. Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by X-ray diffraction10.1111/j.1151-2916.1984.tb19614.x ↗
46. Thermal cycling procedures for laboratory testing of dental restorations10.1016/S0300-5712(98)00037-2 ↗
47. Thermal cycling for restorative materials: Does a standardized protocol exist in laboratory testing? A literature review10.1016/j.jmbbm.2013.09.013 ↗
48. Effect of accelerated aging on dental zirconia-based materials10.1016/j.jmbbm.2016.08.023 ↗
49. Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses?10.1111/j.1600-0501.2007.01460.x ↗
50. Comparison of mechanical properties of three machinable ceramics with an experimental fluorophlogopite glass ceramic10.1016/j.prosdent.2015.02.024 ↗
51. Effect of hydrothermal aging on dental multilayered zirconia for monolithic restorations: An in vitro study10.1016/j.ceramint.2021.03.013 ↗
52. Microstructural analyses of artificial ageing in 5 commercially and non-commercially available Zirconia dental implants10.1016/j.jeurceramsoc.2020.03.050 ↗
53. Monzavi, M., Zhang, F., Meille, S., Douillard, T., Adrien, J., Noumbissi, S., Nowzari, H., and Chevalier, J. (2020). Influence of artificial aging on mechanical properties of commercially and non-commercially available zirconia dental implants. J. Mech. Behav. Biomed. Mater., 101.10.1016/j.jmbbm.2019.103423 ↗
54. Machry, R.V., Dapieve, K.S., Cadore-Rodrigues, A.C., Werner, A., de Jager, N., Pereira, G.K.R., Valandro, L.F., and Kleverlaan, C.J. (2022). Mechanical characterization of a multi-layered zirconia: Flexural strength, hardness, and fracture toughness of the different layers. J. Mech. Behav. Biomed. Mater., 135.10.1016/j.jmbbm.2022.105455 ↗
55. The use of confocal microscopy to assess surface roughness of two milled CAD–CAM ceramics following two polishing techniques10.1016/j.dental.2006.06.012 ↗
56. Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter10.1007/s10856-006-0675-8 ↗
57. Surface roughness in ceramics with different finishing techniques using atomic force microscope and profilometer10.2341/05-54 ↗
58. Surface roughness and translucency of various translucent zirconia ceramics after hydrothermal aging10.1055/s-0041-1736415 ↗
59. Reliability and aging behavior of three different zirconia grades used for monolithic four-unit fixed dental prostheses10.1016/j.dental.2020.08.002 ↗
60. Effect of aging process on some properties of conventional and multilayered translucent zirconia for monolithic restorations10.1016/j.ceramint.2019.09.162 ↗