journal article·2025-01-20Open access

Biaxial Flexural Strength and Vickers Hardness of 3D-Printed and Milled 5Y Partially Stabilized Zirconia

Sebastian Hetzler, Carina Hinzen, Stefan Rues, Clemens Schmitt, Peter Rammelsberg, Andreas Zenthöfer

Abstract

This study compares the mechanical properties of 5-mol% yttria partially stabilized zirconia (5Y-PSZ) materials, designed for 3D printing or milling. Three 5Y-PSZ materials were investigated: printed zirconia (PZ) and two milled zirconia materials, VITA-YZ-XT (MZ-1) and Cercon xt (MZ-2). PZ samples were made from a novel ceramic suspension via digital light processing and divided into three subgroups: PZ-HN-ZD (horizontal nesting, printed with Zipro-D Dental), PZ-VN-Z (vertical nesting, printed with Zipro-D Dental) and PZ-VN-Z (vertical nesting, printed with Zipro Dental). Key outcomes included biaxial flexural strength (ISO 6872) and Vickers hardness (n ≥ 23 samples/subgroup). Microstructure and grain size were analyzed using light and scanning electron microscopy. Printed specimens exhibited biaxial flexural strengths of 1059 ± 178 MPa (PZ-HN-ZD), 797 ± 135 MPa (PZ-VN-ZD), and 793 ± 75 MPa (PZ-VN-Z). Milled samples showed strengths of 745 ± 96 MPa (MZ-1) and 928 ± 87 MPa (MZ-2). Significant differences (α = 0.05) were observed, except between vertically printed groups and MZ-1. Vickers hardness was highest for PZ-VN-Z (HV0.5 = 1590 ± 24), followed by MZ-1 (HV0.5 = 1577 ± 9) and MZ-2 (HV0.5 = 1524 ± 4), with significant differences, except between PZ and MZ-1. PZ samples had the smallest grain size (0.744 ± 0.024 µm) compared to MZ-1 (0.820 ± 0.042 µm) and MZ-2 (1.023 ± 0.081 µm). All materials met ISO 6872 standards for crowns and three-unit prostheses in posterior regions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prosthodontics, Medical Faculty, Heidelberg University, Im Neuenheimer Feld 400, 69120 Heidelberg, Germany

Funding

DFG (German Research Foundation, Deutsche Forschungsgemeinschaft)

References (41)

Show source-provided references
1. Novel Zirconia Materials in Dentistry10.1177/0022034517737483 ↗
2. Current classification of zirconia in dentistry: An updated review10.7717/peerj.15669 ↗
3. Zirconia restoration types, properties, tooth preparation design, and bonding. A narrative review10.1111/jerd.13151 ↗
4. Reliability and lifetime of lithium disilicate, 3Y-TZP, and 5Y-TZP zirconia crowns with different occlusal thicknesses10.1007/s00784-023-05001-6 ↗
5. Additive Manufacturing of Ceramics: A Review
6. Schweiger, J., Edelhoff, D., and Guth, J.F. (2021). 3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing. J. Clin. Med., 10.10.3390/jcm10092010 ↗
7. OECD (2017). The Next Production Revolution, OECD.
8. Fit of anterior restorations made of 3D-printed and milled zirconia: An in-vitro study10.1016/j.jdent.2023.104415 ↗
9. 3D printing of ultra-thin veneers made of lithium disilicate using the LCM method in a digital workflow: A feasibility study10.1111/jerd.13155 ↗
10. Ceramic Printing—Comparative Study of the Flexural Strength of 3D Printed and Milled Zirconia10.11607/ijp.6749 ↗
11. Strength and reliability of zirconia fabricated by additive manufacturing technology10.1016/j.dental.2022.07.004 ↗
12. Biaxial flexural strength of 3D-printed 3Y-TZP zirconia using a novel ceramic printer10.1007/s00784-024-05533-5 ↗
13. Zenthofer, A., Fien, D., Rossipal, J., Ilani, A., Schmitt, C., Hetzler, S., Rammelsberg, P., and Rues, S. (2024). Fracture Resistance of 3D-Printed Occlusal Veneers Made from 3Y-TZP Zirconia. Materials, 17.10.3390/ma17092122 ↗
14. Zhai, Z., Qian, C., Jiao, T., and Sun, J. (2023). In vitro fracture and fatigue resistance of monolithic zirconia crowns fabricated by stereolithography. J. Prosthet. Dent., in press.10.1016/j.prosdent.2023.02.017 ↗
15. Wang, B., Arab, A., Xie, J., and Chen, P. (2022). The Influence of Microstructure on the Flexural Properties of 3D Printed Zirconia Part via Digital Light Processing Technology. Materials, 15.10.3390/ma15041602 ↗
16. Vat Polymerization-Printed Partially Stabilized Zirconia: Mechanical Properties, Reliability and Structural defects
17. Assessment of the trueness of additively manufactured mol3% zirconia crowns at different printing orientations with an industrial and desktop 3D printer compared to subtractive manufacturing10.1016/j.jdent.2024.104942 ↗
18. G*Power 3: A flexible statistical power analysis program for the social, behavioral, and biomedical sciences10.3758/BF03193146 ↗
19. (2018). Zahnheilkunde—Keramische Werkstoffe (Standard No. ISO 6872:2015; Amd.1:2018).
20. (2008). Weibull-Analyse; Deutsche Fassung EN 61649:2008 (Standard No. ICE 61649:2008).
21. Mechanical behavior and microstructural characterization of different zirconia polycrystals in different thicknesses10.4047/jap.2021.13.6.385 ↗
22. Mechanical and optical properties evaluation of rapid sintered dental zirconia10.1016/j.ceramint.2020.07.137 ↗
23. Phatphutthitham, C., Niyatiwatchanchai, B., Rujiraprasert, P., Tagami, J., Osathanon, T., Srijunbarl, A., Singthong, T., Suriyasangpetch, S., and Nantanapiboon, D. (2024). Effect of Grinding and Polishing Protocols on Surface Roughness, Flexural Strength, and Phase Transformation of High-Translucent 5 mol% Yttria-Partially Stabilized Zirconia. Eur. J. Dent., 17.10.1055/s-0044-1787001 ↗
24. Comparative study of flexural strength test methods on CAD/CAM Y-TZP dental ceramics10.1093/rb/rbv020 ↗
25. Schatz, C., Strickstrock, M., Roos, M., Edelhoff, D., Eichberger, M., Zylla, I.M., and Stawarczyk, B. (2016). Influence of Specimen Preparation and Test Methods on the Flexural Strength Results of Monolithic Zirconia Materials. Materials, 9.10.3390/ma9030180 ↗
26. Effect of test method on flexural strength of recent dental ceramics10.4012/dmj.23.490 ↗
27. Biaxial flexural strength of zirconia: A round robin test with 12 laboratories10.1016/j.dental.2020.11.016 ↗
28. Microstructural, physical, and optical characterization of high-translucency zirconia ceramics10.1016/j.prosdent.2019.05.004 ↗
29. Flexural strength of high yttrium oxide-doped monochrome and multilayered fully stabilized zirconia upon various sintered cooling rates10.1111/jopr.13692 ↗
30. Cho, M.H., and Seol, H.J. (2023). Effect of High-Speed Sintering on the Optical Properties, Microstructure, and Phase Distribution of Multilayered Zirconia Stabilized with 5 mol% Yttria. Materials, 16.10.3390/ma16165570 ↗
31. Effect of sintering time on microstructure and optical properties of yttria-partially stabilized monolithic zirconia10.1016/j.dental.2023.10.012 ↗
32. Impact of post printing cleaning methods on geometry, transmission, roughness parameters, and flexural strength of 3D-printed zirconia10.1016/j.dental.2023.05.005 ↗
33. Effect of airborne particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramics10.1016/j.dental.2023.10.025 ↗
34. Hergeroder, C., Wille, S., and Kern, M. (2022). Comparison of Testing Designs for Flexural Strength of 3Y-TZP and 5Y-PSZ Considering Different Surface Treatment. Materials, 15.10.3390/ma15113915 ↗
35. Concerns of hydrothermal degradation in CAD/CAM zirconia10.1177/0022034509354193 ↗
36. The effect of low temperature aging on the mechanical property & phase stability of Y-TZP ceramics10.4047/jap.2009.1.3.113 ↗
37. Low-temperature aging of Y-TZP ceramics10.1111/j.1151-2916.1999.tb02055.x ↗
38. Research on the low-temperature degradation of dental zirconia ceramics fabricated by stereolithography10.1016/j.prosdent.2021.11.012 ↗
39. The effect of low-temperature degradation and building directions on the mechanical properties of additive-manufactured zirconia10.4012/dmj.2023-089 ↗
40. Osteoblast behaviour on zirconia fabricated by additive and subtractive technology10.1016/j.ceramint.2022.11.030 ↗
41. Su, G.Y., Zhang, Y.S., Jin, C.Y., Zhang, Q.Y., Lu, J.R., Liu, Z.Q., Wang, Q., Zhang, X., and Ma, J. (2023). 3D printed zirconia used as dental materials: A critical review. J. Biol. Eng., 17.10.1186/s13036-023-00396-y ↗