journal article·2024-09-25Open access

Suspension-Sprayed Calcium Phosphate Coatings with Antibacterial Properties

Maria Carolina Lanzino, Long-Quan R. V. Le, Anika Höppel, Andreas Killinger, Wolfgang Rheinheimer, Sofia Dembski, Ali Al-Ahmad, Hermann O. Mayr, Michael Seidenstuecker

Journal of Functional Biomaterials· Volume 15· Issue 10

Abstract

Prosthesis loosening due to lack of osteointegration between an implant and surrounding bone tissue is one of the most common causes of implant failure. Further, bacterial contamination and biofilm formation onto implants represent a serious complication after surgery. The enhancement of osteointegration can be achieved by using bioconductive materials that promote biological responses in the body, stimulating bone growth and thus bonding to tissue. Through the incorporation of antibacterial substances in bioconductive, biodegradable calcium phosphate (CaP) coatings, faster osteointegration and bactericidal properties can be achieved. In this study, Cu-doped CaP supraparticles are spray-dried and suspension-sprayed CaP ceramic coatings with antibacterial properties are prepared using high-velocity suspension flame spraying (HVSFS). The objective was to increase the coatings’ porosity and investigate which Cu-doped supraparticles have the strongest antibacterial properties when introduced into the coating layers. Biocompatibility was tested on human Osteosarcoma cells MG63. A porosity of at least 13% was achieved and the supraparticles could be implemented, enhancing it up to 16%. The results showed that the addition of Cu-doped supraparticles did not significantly reduce the number of viable cells compared to the Cu-free sample, demonstrating good biocompatibility. The antimicrobial activity was assessed against the bacterial strains Escherichia coli and Staphylococcus aureus, with Safe Airborne Antibacterial testing showing a significant reduction in both Gram-positive and Gram-negative strains on the Cu-doped coatings.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Manufacturing Technologies of Ceramic Components and Composites (IFKB), University of Stuttgart, 70569 Stuttgart, Germany

G.E.R.N. Center of Tissue Replacement, Regeneration & Neogenesis, Department of Orthopedics and Trauma Surgery, Faculty of Medicine, Albert-Ludwigs-University of Freiburg, Hugstetter Straße 55, 79106 Freiburg, Germany

Department of Tissue Engineering and Regenerative Medicine (TERM), University Hospital Würzburg, 97070 Würzburg, Germany

Fraunhofer Institute for Silicate Research ISC, 97082 Würzburg, Germany

Department of Operative Dentistry and Periodontology, Center for Dental Medicine, Faculty of Medicine, Albert-Ludwigs-University of Freiburg, 79106 Freiburg, Germany

Funding

the German Research Foundation (DFG)

References (75)

Show source-provided references
1. Zhao, X. (2011). Introduction to Bioactive Materials in Medicine. Bioactive Materials in Medicine, Elsevier.10.1533/9780857092939 ↗
2. Jones, J.R. (2005). Scaffolds for Tissue Engineering. Biomaterials, Artificial Organs and Tissue Engineering, Elsevier.10.1533/9781845690861.4.201 ↗
3. Bioactive Coatings for Orthopaedic Implants—Recent Trends in Development of Implant Coatings10.3390/ijms150711878 ↗
4. The Epidemiology of Failure in Total Knee Arthroplasty: Avoiding Your next Revision10.1302/0301-620X.98B1.36293 ↗
5. Hodges, N.A., Sussman, E.M., and Stegemann, J.P. (2021). Aseptic and Septic Prosthetic Joint Loosening: Impact of Biomaterial Wear on Immune Cell Function, Inflammation, and Infection. Biomaterials, 278.10.1016/j.biomaterials.2021.121127 ↗
6. Clinical Presentation and Treatment of Orthopaedic Implant-associated Infection10.1111/joim.12233 ↗
7. Burtscher, S., Krieg, P., Killinger, A., Al-Ahmad, A., Seidenstücker, M., Latorre, S.H., and Bernstein, A. (2019). Thin Degradable Coatings for Optimization of Osteointegration Associated with Simultaneous Infection Prophylaxis. Materials, 12.10.3390/ma12213495 ↗
8. Bioceramics: From Concept to Clinic10.1111/j.1151-2916.1991.tb07132.x ↗
9. Bonding Mechanisms at the Interface of Ceramic Prosthetic Materials10.1002/jbm.820050611 ↗
10. Bioactive Materials10.1016/0272-8842(95)00126-3 ↗
11. Takadama, H., and Kokubo, T. (2008). In Vitro Evaluation of Bone Bioactivity. Bioceramics and Their Clinical Applications, Elsevier.10.1533/9781845694227.1.165 ↗
12. Clinical Applications of Calcium Phosphate Biomaterials: A Review10.1016/0272-8842(93)90050-2 ↗
13. Structure, Properties, and Biomedical Performance of Osteoconductive Bioceramic Coatings10.1016/j.surfcoat.2012.11.013 ↗
14. A Review of Chemical Surface Modification of Bioceramics: Effects on Protein Adsorption and Cellular Response10.1016/j.colsurfb.2014.07.029 ↗
15. Characterization and In Vitro Corrosion Investigations of Thermal Sprayed Hydroxyapatite and Hydroxyapatite-Titania Coatings on Ti Alloy10.1007/s11661-012-1175-8 ↗
16. Plasma-Sprayed Hydroxylapatite Coatings as Biocompatible Intermediaries Between Inorganic Implant Surfaces and Living Tissue10.1007/s11666-018-0737-8 ↗
17. Degradation of Calcium Phosphate Ceramics10.1002/(SICI)1097-4636(199901)44:1<78::AID-JBM9>3.0.CO;2-6 ↗
18. Lu, H., Zhou, Y., Ma, Y., Xiao, L., Ji, W., Zhang, Y., and Wang, X. (2021). Current Application of Beta-Tricalcium Phosphate in Bone Repair and Its Mechanism to Regulate Osteogenesis. Front. Mater., 8.10.3389/fmats.2021.698915 ↗
19. Resorption Mechanism of Hydroxyapatite and β-Tricalcium Phosphate Coating Layer10.4028/www.scientific.net/KEM.396-398.81 ↗
20. Bernstein, A., Suedkamp, N., Mayr, H.O., Gadow, R., Burtscher, S., Arhire, I., Killinger, A., and Krieg, P. (2017). Thin Degradable Coatings for Optimization of Osseointegration Associated with Simultaneous Infection Prophylaxis. Nanostructures for Antimicrobial Therapy, Elsevier.10.1016/B978-0-323-46152-8.00005-6 ↗
21. Biodegradable vs Non-Biodegradable Antibiotic Delivery Devices in the Treatment of Osteomyelitis10.1517/17425247.2013.751371 ↗
22. Birkett, M., Dover, L., Cherian Lukose, C., Wasy Zia, A., Tambuwala, M.M., and Serrano-Aroca, Á. (2022). Recent Advances in Metal-Based Antimicrobial Coatings for High-Touch Surfaces. Int. J. Mol. Sci., 23.10.3390/ijms23031162 ↗
23. Kozelskaya, A.I., Verzunova, K.N., Akimchenko, I.O., Frueh, J., Petrov, V.I., Slepchenko, G.B., Bakina, O.V., Lerner, M.I., Brizhan, L.K., and Davydov, D.V. (2023). Antibacterial Calcium Phosphate Coatings for Biomedical Applications Fabricated via Micro-Arc Oxidation. Biomimetics, 8.10.3390/biomimetics8050444 ↗
24. Fosca, M., Streza, A., Antoniac, I.V., Vadalà, G., and Rau, J.V. (2023). Ion-Doped Calcium Phosphate-Based Coatings with Antibacterial Properties. J. Funct. Biomater., 14.10.3390/jfb14050250 ↗
25. Heimann, R.B. (2024). Plasma-Sprayed Osseoconductive Hydroxylapatite Coatings for Endoprosthetic Hip Implants: Phase Composition, Microstructure, Properties, and Biomedical Functions. Coatings, 14.10.20944/preprints202405.1476.v1 ↗
26. A Review on Plasma Sprayed Titanium and Hydroxyapatite Coatings on Polyetheretherketone Implants10.1504/IJSURFSE.2019.103923 ↗
27. Jaafar, A., Hecker, C., Árki, P., and Joseph, Y. (2020). Sol-Gel Derived Hydroxyapatite Coatings for Titanium Implants: A Review. Bioengineering, 7.10.3390/bioengineering7040127 ↗
28. Sol–Gel Synthesis of Calcium Phosphate-Based Coatings—A Review10.6001/chemija.v31i1.4169 ↗
29. Sedelnikova, M.B., Komarova, E.G., Sharkeev, Y.P., Chebodaeva, V.V., Tolkacheva, T.V., Kondranova, A.M., Zakharenko, A.M., and Bakina, O.V. (2020). Effect of the Porosity, Roughness, Wettability, and Charge of Micro-Arc Coatings on the Efficiency of Doxorubicin Delivery and Suppression of Cancer Cells. Coatings, 10.10.3390/coatings10070664 ↗
30. Heimann, R.B. (2020). Materials for Medical Application, De Gruyter.10.1515/9783110619249 ↗
31. Introduction to High-Velocity Suspension Flame Spraying (HVSFS)10.1007/s11666-008-9264-3 ↗
32. High-Velocity Suspension Flame Spraying (HVSFS), a New Approach for Spraying Nanoparticles with Hypersonic Speed10.1016/j.surfcoat.2006.04.034 ↗
33. Functionalization of Suspension Sprayed HVOF TiO2 Coatings by Direct Laser Interference Patterning10.1007/s11666-021-01181-3 ↗
34. Blum, M., Derad, L., and Killinger, A. (2022). Deposition of Fluoresceine-Doped HAp Coatings via High-Velocity Suspension Flame Spraying. Coatings, 12.10.3390/coatings12091251 ↗
35. Przybilla, P., Subkov, E., Latorre, S.H., Zankovic, S., Mayr, H.O., Killinger, A., Schmal, H., and Seidenstuecker, M. (2023). Effect of 20 Μm Thin Ceramic Coatings of Hydroxyapatite, Bioglass, GB14 and Beta-Tricalciumphosphate with Copper on the Biomechanical Stability of Femoral Implants. J. Mech. Behav. Biomed. Mater., 144.10.1016/j.jmbbm.2023.105951 ↗
36. Supraparticles: Functionality from Uniform Structural Motifs10.1021/acsnano.8b00873 ↗
37. Höppel, A., Bahr, O., Ebert, R., Wittmer, A., Seidenstuecker, M., Lanzino, M.C., Gbureck, U., and Dembski, S. (RSC Adv., 2024). Cu-Doped Calcium Phosphate Supraparticles for Bone Tissue Regeneration, RSC Adv., Submit.10.1039/D4RA04769A ↗
38. (2015). Metallische Werkstoffe_- Instrumentierte Eindringprüfung Zur Bestimmung Der Härte Und Anderer Werkstoffparameter_- Teil_1: Prüfverfahren (ISO_14577-1:2015); Deutsche Fassung EN_ISO_14577-1:2015 (Standard No. DIN EN ISO 14577-1:2015-11).
39. (1998). Geometrische Produktspezifikationen (GPS)_- Oberflächenbeschaffenheit: Tastschnittverfahren_- Nenneigenschaften von Tastschnittgeräten (ISO_3274:1996); Deutsche Fassung EN_ISO_3274:1997 (Standard No. DIN EN ISO 3274:1998-04).
40. (2021). Metall- Und Oxidschichten_- Schichtdickenmessung_- Mikroskopisches Verfahren (ISO_1463:2021); Deutsche Fassung EN_ISO_1463:2021 (Standard No. DIN EN ISO 1463:2021-08).
41. (2021). Biologische Beurteilung von Medizinprodukten_- Teil_1: Beurteilung Und Prüfungen Im Rahmen Eines Risikomanagementsystems (ISO_10993-1:2018, Einschließlich Korrigierte Fassung 2018-10); Deutsche Fassung EN_ISO_10993-1:2020 (Standard No. DIN EN ISO 10993-1:2021-05).
42. Huber, F., Vollmer, D., Vinke, J., Riedel, B., Zankovic, S., Schmal, H., and Seidenstuecker, M. (2022). Influence of 3D Printing Parameters on the Mechanical Stability of PCL Scaffolds and the Proliferation Behavior of Bone Cells. Materials, 15.10.3390/ma15062091 ↗
43. Al-Ahmad, A., Zou, P., Solarte, D.L.G., Hellwig, E., Steinberg, T., and Lienkamp, K. (2014). Development of a Standardized and Safe Airborne Antibacterial Assay, and Its Evaluation on Antibacterial Biomimetic Model Surfaces. PLoS ONE, 9.10.1371/journal.pone.0111357 ↗
44. Using a Synthetic Body Fluid (SBF) Solution of 27 mM HCO3− to Make Bone Substitutes More Osteointegrative10.1016/j.msec.2007.10.058 ↗
45. Tuning the Morphology of Spray-Dried Supraparticles: Effects of Building Block Size and Concentration10.1002/ppsc.202200127 ↗
46. Glutaraldehyde-Crosslinking Chitosan Scaffolds Reinforced with Calcium Phosphate Spray-Dried Granules for Bone Tissue Applications10.1016/j.msec.2019.110557 ↗
47. Thermal Decomposition of (Sr, Ti) Organic Precursors during the Pechini Process10.1007/BF01129934 ↗
48. Fauchais, P., Heberlein, J.V., and Boulos, M.I. (2014). Thermal Spray Fundamentals. Volume 2, Springer.10.1007/978-0-387-68991-3 ↗
49. Surface Treatments of Titanium Dental Implants for Rapid Osseointegration10.1016/j.dental.2006.06.025 ↗
50. Identification Card and Codification of the Chemical and Morphological Characteristics of 14 Dental Implant Surfaces10.1563/AAID-JOI-D-11-00080 ↗
51. Effect of Surface Roughness, Porosity, and a Resorbable Calcium Phosphate Coating on Osseointegration of Titanium in a Minipig Model10.1002/jbm.a.32000 ↗
52. Suggested Guidelines for the Topographic Evaluation of Implant Surfaces
53. Implant Surface Roughness and Patient Factors on Long-term Peri-implant Bone Loss10.1111/prd.12177 ↗
54. Mechanical and Tribological Properties of Tricalcium Phosphate Reinforced with Fluorapatite as Coating for Orthopedic Implant10.1016/j.matlet.2017.12.044 ↗
55. Evaluation of the Mechanical Properties of Plasma Sprayed Hydroxyapatite Coatings10.1016/j.apsusc.2014.02.125 ↗
56. Effect of the Calcium to Phosphorus Ratio on the Setting Properties of Calcium Phosphate Bone Cements10.1007/s10856-012-4686-3 ↗
57. Effect of Thermocycling on Hardness, Absorption, Solubility and Colour Change of Soft Liners10.1111/j.1741-2358.2010.00447.x ↗
58. Current Advances in Bone Tissue Engineering Concerning Ceramic and Bioglass Scaffolds: A Review10.1016/j.ceramint.2019.07.096 ↗
59. Solubility-Hardness Correlation in Molecular Crystals: Curcumin and Sulfathiazole Polymorphs10.1021/cg500305n ↗
60. Biocompatibility and Osteointegration Capability of β-TCP Manufactured by Stereolithography 3D Printing: In Vitro Study10.1515/biol-2022-0530 ↗
61. Biocompatibility and Osseointegration of β-TCP: Histomorphological and Biomechanical Studies in a Weight-bearing Sheep Model10.1002/jbm.b.30034 ↗
62. Biological and Medical Applications of Calcium Phosphate Nanoparticles10.1002/chem.202005257 ↗
63. In Vitro Studies of Solution Precursor Plasma-sprayed Copper-doped Hydroxyapatite Coatings with Increasing Copper Content10.1002/jbm.b.34589 ↗
64. Antibacterial Effect of a Copper-Containing Titanium Alloy against Implant-Associated Infection Induced by Methicillin-Resistant Staphylococcus Aureus10.1016/j.actbio.2020.10.026 ↗
65. Copper Ions Interfere with the Reduction of the Water-Soluble Tetrazolium Salt-810.1021/tx400414c ↗
66. Investigation of Antibacterial Effect of Copper Introduced Titanium Surface by Electrochemical Treatment against Facultative Anaerobic Bacteria10.4012/dmj.2019-178 ↗
67. Li, X., Cong, Y., Ovais, M., Cardoso, M.B., Hameed, S., Chen, R., Chen, M., and Wang, L. (2023). Copper-based Nanoparticles against Microbial Infections. WIREs Nanomed. Nanobiotechnol., 15.10.1002/wnan.1888 ↗
68. Metallic Copper as an Antimicrobial Surface10.1128/AEM.02766-10 ↗
69. Copper and Antibiotics10.1016/bs.ampbs.2017.01.007 ↗
70. Fowler, L., Engqvist, H., and Öhman-Mägi, C. (2019). Effect of Copper Ion Concentration on Bacteria and Cells. Materials, 12.10.3390/ma12223798 ↗
71. Surface Topographical Factors Influencing Bacterial Attachment10.1016/j.cis.2012.06.015 ↗
72. High-Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications10.1007/s11666-011-9724-z ↗
73. Solutions Able to Reproduce in Vivo Surface-structure Changes in Bioactive Glass-ceramic A-W 310.1002/jbm.820240607 ↗
74. Measurements of the Solubilities and Dissolution Rates of Several Hydroxyapatites10.1016/S0142-9612(01)00180-6 ↗
75. Relationship between in Vitro Apatite-Forming Ability Measured Using Simulated Body Fluid and in Vivo Bioactivity of Biomaterials10.1016/j.msec.2013.10.026 ↗