journal article·2024-04-23Open access

Hydrogels and Carbon Nanotubes: Composite Electrode Materials for Long-Term Electrocardiography Monitoring

Leszek Kolodziej, Olga Iwasińska-Kowalska, Grzegorz Wróblewski, Tomasz Giżewski, Małgorzata Jakubowska, Agnieszka Lekawa-Raus

Abstract

This paper presents methods for developing high-performance interface electrode materials designed to enhance signal collection efficacy during long-term (over 24 h) electrocardiography (ECG) monitoring. The electrode materials are fabricated by integrating commercial ECG liquid hydrogels with carbon nanotubes (CNTs), which are widely utilized in dry-electrode technologies and extensively discussed in the current scientific literature. The composite materials are either prepared by dispersing CNTs within the commercial liquid hydrogel matrix or by encasing the hydrogels in macroscopic CNT films. Both approaches ensure the optimal wetting of the epidermis via the hydrogels, while the CNTs reduce material impedance and stabilize the drying process. The resulting electrode materials maintain their softness, allowing for micro-conformal skin attachment, and are biocompatible. Empirical testing confirms that the ECG electrodes employing these hybrid hydrogels adhere to relevant standards for durations exceeding 24 h. These innovative hybrid solutions merge the benefits of both wet and dry ECG electrode technologies, potentially facilitating the extended monitoring of ECG signals and thus advancing the diagnosis and treatment of various cardiac conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Muscle activation and electromyography studies · Neuroscience and Neural Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechatronics, Warsaw University of Technology, 02-525 Warsaw, Poland

Faculty of Electrical Engineering and Computer Science, Lublin University of Technology, 20-618 Lublin, Poland

Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, 02-524 Warsaw, Poland

Centre for Advanced Materials and Technologies, Warsaw University of Technology, 02-822 Warsaw, Poland

Funding

Warsaw University of Technology · National Science Centre, Poland

References (45)

Show source-provided references
1. Shay, T.W. (2017). Hydrogel and Microfluidic Enabling Technologies for Wearable Biomonitoring Devices: Sweat and ECG Sensing, North Carolina State University.
2. Zhao, J., Sclabassi, R.J., and Sun, M. (2005, January 2–3). Biopotential electrodes based on hydrogel. Proceedings of the IEEE 31st Annual Northeast Bioengineering Conference, Hoboken, NJ, USA.
3. American National Standards Institute (2020). ANSI/AAMI EC12:2000 (R2020): Disposable ECG Electrodes, Association for the Advancement of Medical Instrumentation (AAMI).
4. Influence of defibrillation treatment on some electrical parameters and application safety of ECG electrodes
5. Nanomaterial-enabled dry electrodes for electrophysiological sensing: A review10.1007/s11837-016-1818-0 ↗
6. Flexible polymeric dry electrodes for the long-term monitoring of ECG10.1016/j.sna.2007.11.019 ↗
7. Development of printed and flexible dry ECG electrodes10.1016/j.sbsr.2018.05.001 ↗
8. CNT/PDMS Composite Flexible Dry Electrodesfor Long-Term ECG Monitoring10.1109/TBME.2012.2190288 ↗
9. Abu-Saude, M., and Morshed, B.I. (2018). Characterization of a Novel Polypyrrole (PPy) Conductive Polymer Coated Patterned Vertical CNT (pvCNT) Dry ECG Electrode. Chemosensors, 6.10.3390/chemosensors6030027 ↗
10. Graphene-clad textile electrodes for electrocardiogram monitoring10.1016/j.snb.2015.07.111 ↗
11. Development and wearer trial of ECG-garment with textile-based dry electrodes10.1016/j.sna.2021.112784 ↗
12. First human trials of a dry electrophysiology sensor using a carbon nanotube array interface10.1016/j.sna.2008.03.007 ↗
13. Gandhi, B., and Raghava, N.S. (2020). Fabrication techniques for carbon nanotubes based ECG electrodes: A review. IETE J. Res., 1–20.10.1080/03772063.2020.1768909 ↗
14. Long term biopotential recording by body conformable photolithography fabricated low cost polymeric microneedle arrays10.1016/j.sna.2015.10.041 ↗
15. A 3D printed dry electrode for ECG/EEG recording10.1016/j.sna.2011.12.017 ↗
16. Bioinspired, highly stretchable, and conductive dry adhesives based on 1D–2D hybrid carbon nanocomposites for all-in-one ECG electrodes10.1021/acsnano.6b01355 ↗
17. Skin impedance and electro-osmosis in the human epidermis10.1007/BF02464037 ↗
18. Dry electrode made from carbon nanotubes for continuous recording of bio-signals10.1016/j.mee.2018.11.003 ↗
19. Shear induced CNT/PDMS conducting thin film for electrode cardiogram (ECG) electrode10.1007/s13206-012-6112-9 ↗
20. Carbon nanotube-based self-adhesive polymer electrodes for wireless long-term recording of electrocardiogram signals10.1080/09205063.2016.1239951 ↗
21. Patterned vertical carbon nanotube dry electrodes for impedimetric sensing and stimulation10.1109/JSEN.2015.2449301 ↗
22. In vitro studies of carbon nanotubes biocompatibility10.1016/j.carbon.2005.11.022 ↗
23. The biocompatibility of carbon nanotubes10.1016/j.carbon.2005.10.011 ↗
24. Electrical properties of carbon nanotube based fibers and their future use in electrical wiring10.1002/adfm.201303716 ↗
25. Taborowska, P., Giżewski, T., Patmore, J., Janczak, D., Jakubowska, M., and Lekawa-Raus, A. (2020). Spun carbon nanotube fibres and films as an alternative to printed electronic components. Materials, 13.10.3390/ma13020431 ↗
26. Carbon nanotube films spun from a gas phase reactor for manufacturing carbon nanotube film/carbon fibre epoxy hybrid composites for electrical applications10.1016/j.carbon.2019.08.078 ↗
27. Continuous growth of carbon nanotube films: From controllable synthesis to real applications10.1016/j.compositesa.2021.106359 ↗
28. A One-Step Method of Hydrogel Modification by Single-Walled Carbon Nanotubes for Highly Stretchable and Transparent Electronics10.1021/acsami.8b08409 ↗
29. Lepak-Kuc, S., Podsiadły, B., Skalski, A., Janczak, D., Jakubowska, M., and Lekawa-Raus, A. (2019). Highly Conductive Carbon Nanotube-Thermoplastic Polyurethane Nanocomposite for Smart Clothing Applications and Beyond. Nanomaterials, 9.10.3390/nano9091287 ↗
30. Preparation and applications of electrically conductive wood layered composites10.1016/j.compositesa.2019.105656 ↗
31. Carbon nanotube film based multifunctional composite materials: An overview10.1088/2631-6331/ab9752 ↗
32. Carbon nanotube film/epoxy composites with high strength and toughness10.1002/pc.23617 ↗
33. Towards the development of superhydrophobic carbon nanomaterial coatings on wood10.1016/j.porgcoat.2018.08.025 ↗
34. Zakaria, Z. (2006, January 27–28). Detection of Heart Blocks in ECG Signals by Spectrum and Time-Frequency Analysis. Proceedings of the 2006 4th Student Conference on Research and Development, [SCOReD 2006], Shah Alam, Malaysia.
35. Sörnmo, L., and Laguna, P. (2006). Wiley Encyclopedia of Biomedical Engineering, Wiley.
36. Balasubramaniam, D., and Nedumaran, D. (2009, January 29–30). Implementation of ECG signal processing and analysis techniques in digital signal processor based system. Proceedings of the 2009 IEEE International Workshop on Medical Measurements and Applications, Cetraro, Italy.10.1109/MEMEA.2009.5167955 ↗
37. Bharmal, M.A., and Ullah, M.S. (2020, January 28–29). Distinguish between Maternal and Fetal ECG Signals. Proceedings of the 2020 SoutheastCon, Raleigh, NC, USA.10.1109/SoutheastCon44009.2020.9249648 ↗
38. Fundamental differences between the standard 12-lead electrocardiograph and the modified (Mason-Likar) exercise lead system10.1093/eurheartj/8.7.725 ↗
39. (2017, January 25–27). Piroon Kaewfoongrungsi; Daranee Hormdee. The comparison between linear regression derivings of 12-lead ECG signals from 5-lead system and EASI-lead system. Proceedings of the 2017 17th International Symposium on Communications and Information Technologies (ISCIT), Cairns, Australia.10.1109/ISCIT.2017.8261221 ↗
40. Touma, A., Tafrershi, R., and Khan, M. (2016, January 24–27). Detection of cardiovascular abnormalities through 5-lead system algorithm. Proceedings of the 2016 IEEE-EMBS International Conference on Biomedical and Health Informatics (BHI), Las Vegas, NV, USA.10.1109/BHI.2016.7455884 ↗
41. Influence of atmospheric water vapour on electrical performance of carbon nanotube fibres10.1016/j.carbon.2015.02.018 ↗
42. Washable, colored and textured, carbon nanotube textile yarns10.1016/j.carbon.2020.10.045 ↗
43. Liquid Infiltration into Carbon Nanotube Fibers: Effect on Structure and Electrical Properties10.1021/nn401337m ↗
44. Polymer–Water Interaction Enabled Intelligent Moisture Regulation in Hydrogels10.1021/acs.jpclett.1c00034 ↗
45. Electrochemistry of Graphene Nanoplatelets Printed Electrodes for Cortical Direct Current Stimulation10.3389/fnins.2020.594235 ↗