3D Printing of a Porous Zn-1Mg-0.1Sr Alloy Scaffold: A Study on Mechanical Properties, Degradability, and Biosafety
Source abstract
Abstract
In recent years, the use of zinc (Zn) alloys as degradable metal materials has attracted considerable attention in the field of biomedical bone implant materials. This study investigates the fabrication of porous scaffolds using a Zn-1Mg-0.1Sr alloy through a three-dimensional (3D) printing technique, selective laser melting (SLM). The results showed that the porous Zn-1Mg-0.1Sr alloy scaffold featured a microporous structure and exhibited a compressive strength (CS) of 33.71 ± 2.51 MPa, a yield strength (YS) of 27.88 ± 1.58 MPa, and an elastic modulus (E) of 2.3 ± 0.8 GPa. During the immersion experiments, the immersion solution showed a concentration of 2.14 ± 0.82 mg/L for Zn2+ and 0.34 ± 0.14 mg/L for Sr2+, with an average pH of 7.61 ± 0.09. The porous Zn-1Mg-0.1Sr alloy demonstrated a weight loss of 12.82 ± 0.55% and a corrosion degradation rate of 0.36 ± 0.01 mm/year in 14 days. The Cell Counting Kit-8 (CCK-8) assay was used to check the viability of the cells. The results showed that the 10% and 20% extracts significantly increased the activity of osteoblast precursor cells (MC3T3-E1), with a cytotoxicity grade of 0, which indicates safety and non-toxicity. In summary, the porous Zn-1Mg-0.1Sr alloy scaffold exhibits outstanding mechanical properties, an appropriate degradation rate, and favorable biosafety, making it an ideal candidate for degradable metal bone implants.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Orthopedics, Peking University Third Hospital, Beijing 100191, China
Engineering Research Center of Bone and Joint Precision Medicine, Ministry of Education, Beijing 100191, China
Funding
Natural Science Foundation of Beijing Municipality
References (59)
Show source-provided references
1. Allogeneic umbilical cord-derived mesenchymal stem cells for treating critical-sized bone defects: A translational study10.1007/s00590-020-02765-5 ↗
2. Current advances in the roles of doped bioactive metal in biodegradable polymer composite scaffolds for bone repair: A mini review10.1002/adem.202101510 ↗
3. Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives
4. Improving the corrosion behavior of magnesium alloys with a focus on AZ91 Mg alloy intended for biomedical application by microstructure modification and coating10.1177/09544119221105705 ↗
5. Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility10.1016/j.actbio.2019.07.038 ↗
6. A Biomimetic Zinc Alloy Scaffold Coated with Brushite for Enhanced Cranial Bone Regeneration10.1021/acsbiomaterials.9b01895 ↗
7. Additively manufactured biodegradable porous zinc10.1016/j.actbio.2019.10.034 ↗
8. In vitro degradation behavior and microstructural evolution of a novel biodegrad able Zn-Mg-Sr alloy during homogenization10.1007/s11665-022-07405-z ↗
9. Response of human periosteal cells to degradation products of zinc and its alloy10.1016/j.msec.2019.110208 ↗
10. Image-based finite-element modeling of the human femur10.1080/10255842.2020.1789863 ↗
11. Magnesium-based biomaterials as emerging agents for bone repair and regeneration:From mechanism to application10.1016/j.jma.2021.03.004 ↗
12. Design biodegradable Zn alloys: Second phases and their significant influences on alloy properties
13. In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn–Mg alloy10.1002/jbm.b.33341 ↗
14. Process parame teropimization for removable partialdenture frame works manufactured by select velaser melting10.1016/j.prosdent.2021.04.021 ↗
15. Li, P., Dai, J., Li, Y., Alexander, D., Čapek, J., Geis-Gerstorfer, J., Wan, G., Han, J., Yu, Z., and Li, A. (2023). Zinc based biodegradable metals for bone repair and regeneration: Bioactivity and molecular mechanisms. Mater. Today Bio, 28.10.1016/j.mtbio.2023.100932 ↗
16. Challenges and opportunities in the selective laser melting of biodegradable metals for load-bearing bone scaffold applications10.1007/s11661-020-05796-z ↗
17. Nace, A. (2012). Standard Guide for Laboratory Immersion Corrosion Testing of Metals, ASTM International.
18. In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications10.1016/j.actbio.2020.03.009 ↗
19. Mechanical properties and in vitro biodegradation of newly developed porous Zn scaffolds for biomedical applications10.1016/j.matdes.2016.06.080 ↗
20. (2012). Sample Preparation and Reference Materials (Standard No. ISO10993-12).
21. Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials10.1016/j.actbio.2015.04.011 ↗
22. Hemolysis and cytotoxicity mechanisms of biodegradable magnesium and its alloys10.1016/j.msec.2014.08.038 ↗
23. Selection of extraction medium influences cytotoxicity of zinc and its alloys10.1016/j.actbio.2019.03.013 ↗
24. Improving exposure of anodically ordered Ni-Ti-O and corrosion resistance and biological properties of NiTi alloys by substrate electropolishing10.1007/s12598-021-01721-4 ↗
25. Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants10.1016/j.jmatprotec.2018.03.007 ↗
26. Experimental investigation on selective laser melting of bulk net-shape pure magnesium10.1080/10426914.2015.1025963 ↗
27. Corrosion fatigue behavior of additively manufactured biodegradable porous zinc10.1016/j.actbio.2020.02.001 ↗
28. Fundamental analysis of the influence of powder characteristics in Selective Laser Melting of molybdenum based on a multi-physical simulation model10.1016/j.ijrmhm.2017.11.034 ↗
29. Aremntias, S.L.D., Real, J.C.D., Paz, E., and Dunne, N. (2020). Advances in Biodegradable 3D Printed Scaffolds with Carbon-Based Nanomaterials for Bone Regeneration. Materials, 13.10.3390/ma13225083 ↗
30. Strategies for Emhancing Vascul arization of Biomaterial Based Scaffold in Bone Regeneration10.1002/tcr.202200008 ↗
31. Full-thickness osteochondral defect repair using a biodegradable bilayered scaffold of porous zinc and chondroitin sulfate hydrogel
32. Biodegradable porous Zn-1Mg-3βTCP scaffold for bone defect repair: In vitro and in vivo evaluation10.1016/j.jmst.2023.03.055 ↗
33. The microstructure, mechanical properties and degradation behavior of laser-melted MgSn alloys10.1016/j.jallcom.2016.06.068 ↗
34. Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn-Mg-Sr alloys as biodegradable metals
35. Biodegradable Zn-Sr alloys with enhanced mechanical and biocompatibility for biomedical applications10.1016/j.smaim.2021.12.004 ↗
36. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
37. Biomimetic porous scaffolds for bone tissue engineering10.1016/j.mser.2014.04.001 ↗
38. Deep vein thrombosis prophylaxis after total hip arthroplasty in Asian patients10.5371/hp.2018.30.4.197 ↗
39. Influence of model environment complexity on corrosion mechanism of biodegradable zinc alloys10.1016/j.corsci.2021.109520 ↗
40. Zinc-based alloys for degradable vascular stent applications10.1016/j.actbio.2018.03.005 ↗
41. Preparation and characterization of porous zinc prepared by spark plasma sintering as a material for biodegradable scaffolds10.1016/j.matchemphys.2017.10.008 ↗
42. Biodegradation of crude oil in seawater by using a consortium of symbiotic bacteria10.1016/j.envres.2022.113721 ↗
43. Synthesis of biodegradable Zn-based scaffolds using NaCl templates: Relationship between porosity, compressive properties and degradation behavior10.1016/j.matchar.2018.01.033 ↗
44. Effect of Exposure Time on Corrosion Behavior of Zinc-Alloy in Simulated Body Fluid Solution: Electrochemical and Surface Investigation10.1016/j.jmrt.2020.12.050 ↗
45. Control of Degradation Rate of Mg Alloys Using Silica Sol–Gel Coatings for Biodegradable Implant Materials10.1007/s10971-018-4824-6 ↗
46. A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying10.1016/j.jmbbm.2018.03.018 ↗
47. Initial formation of corrosion products on pure zinc in simulated body fluid10.1016/j.jmst.2018.05.005 ↗
48. In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay10.1002/jbm.b.35147 ↗
49. Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
50. Microstructural, mechanical, in vitro corrosion and biological characterization of an extruded Zn-0.8 Mg-0.2 Sr(wt%) as an absorbable material10.1016/j.msec.2021.111924 ↗
51. Effects of Sr addition on microstructure, mechanical properties and in vitro degradation behavior of as-extruded Zn−Sr binary alloys10.1016/S1003-6326(20)65346-8 ↗
52. A review on current research status of the surface modification of Zn-based biodegradable metals
53. Dai, Q., Peng, S., Zhang, Z., Liu, Y., Fan, M., and Zhao, F. (2021). Microstructure and mechanical properties of zinc matrix biodegradable composites reinforced by graphene. Front. Bioeng. Biotechnol., 9.10.3389/fbioe.2021.635338 ↗
54. Cancellous bone-like porous Fe@Zn scaffolds with core-shell-structured skeletons for biodegradable bone implants10.1016/j.actbio.2020.11.032 ↗
55. Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn–Mg alloys10.1016/j.msec.2015.08.015 ↗
56. Enhanced anti-biofilm and biocompatibility of Zn and Mg substituted β-tricalcium phosphate/functionalized multiwalled carbon nanotube composites towards A. baumannii and Methicillin-Resistant Staphylococcus aureus, and MG-63 cells10.1016/j.ijpharm.2022.122248 ↗
57. Current status and perspectives of zinc-based absorbable alloys for biomedical applications10.1016/j.actbio.2019.07.034 ↗
58. Guyton, A.C. (2015). Textbook of Medical Physiology e-Book, Elsevier Health Sciences.
59. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗