journal article·2024-02-20Open access

Influence of Hybrid Surface Modification on Biocompatibility and Physicochemical Properties of Ti-6Al-4V ELI Titanium

Anna Woźniak, Weronika Smok, Janusz Szewczenko, Marcin Staszuk, Grzegorz Chladek

Abstract

Titanium-based materials are the most widely used materials in biomedical applications. However, according to literature findings, the degradation products of titanium have been associated with potential allergic reactions, inflammation, and bone resorption. The corrosion process of Ti-6Al-4V in the human body environment may be exacerbated by factors such as reduced pH levels and elevated concentrations of chloride compounds. Coatings made of biopolymers are gaining attention as they offer numerous advantages for enhancing implant functionality, including improved biocompatibility, bioactivity, wettability, drug release, and antibacterial activity. This study analyzes the physicochemical and electrochemical behavior of the Ti-6Al-4V ELI alloy subjected to PCL and PCL/TiO2 deposition by the electrospinning method. To characterize the polymer-based layer, tests of chemical and phase composition, as well as surface morphology investigations, were performed. Wetting angle tests were conducted as part of assessing the physicochemical properties. The samples were subjected to corrosion behavior analysis, which included open circuit potential measurements, potentiodynamic tests, and the electrochemical impedance spectroscopy method. Additionally, the quantification of released ions post the potentiodynamic test was carried out using the inductively coupled plasma atomic emission spectrometry (ICP–AES) method. Cytotoxicity tests were also performed. It was found that surface modification by depositing a polymer-based layer on the titanium substrate material using the electrospinning method provides improved corrosion behavior, and the samples exhibit non-toxic properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Research Laboratory, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A Street, 44-100 Gliwice, Poland

Department of Engineering Materials and Biomaterials, Silesian University of Technology, Konarskiego 18A Street, 44-100 Gliwice, Poland

Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Franklina Roosevelta 40 Street, 41-800 Zabrze, Poland

References (84)

Show source-provided references
1. A review of biocompatible metal injection moulding process parameters for biomedical applications10.1016/j.msec.2017.05.016 ↗
2. A strongly hydrophobic and serum-repelling surface composed of CrN films deposited on laser-patterned microstructures that was optimized with an orthogonal experiment10.1016/j.surfcoat.2020.125708 ↗
3. Role of proteins in the degradation of relatively inert alloys in the human body10.1038/s41529-018-0049-y ↗
4. Ionescu, F., Reclaru, L., Ardelean, L.C., and Blatter, A. (2019). Comparative analysis of the corrosion resistance of titanium alloys intended to come into direct or prolonged contact with live tissues. Materials, 12.10.3390/ma12172841 ↗
5. A synergistic effect of albumin and H2O2 accelerates corrosion of Ti6Al4V10.1016/j.actbio.2015.07.046 ↗
6. Woźniak, A., Walke, W., Jakóbik-Kolon, A., Ziębowicz, B., Brytan, Z., and Adamiak, M. (2021). The Influence of ZnO Oxide Layer on the Physicochemical Behavior of Ti6Al4V Titanium Alloy. Materials, 14.10.3390/ma14010230 ↗
7. Enhanced Biotribological and Anticorrosion Properties and Bioactivity of Ti6Al4V Alloys with Laser Texturing10.1021/acsomega.2c03166 ↗
8. Synergistic effect of fretting wear and sliding wear of Co-alloy and Ti-alloy in Hanks’ solution10.1016/j.wear.2007.01.102 ↗
9. Comparison of nano-frètting and nano-scratch tests on biomedical materials10.1016/j.triboint.2012.08.007 ↗
10. Metallosis and elevated serum levels of tantalum following failed revision hip arthroplasty—A case report10.3109/17453674.2014.950816 ↗
11. Tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy produced by selective laser melting method and then processed using gas nitriding, CN or Ti-C:H coating treatments10.1016/j.surfcoat.2018.07.011 ↗
12. Tribological response of laser-textured Ti6Al4V alloy under dry conditions and lubricated with Hank’s solution10.1016/j.triboint.2021.107049 ↗
13. Micro/Nanotexture Design for Improving Tribological Properties of Cr/GLC Films in Seawater10.1080/10402004.2016.1147629 ↗
14. Asymmetric surface texturing for directional friction control under dry sliding condition10.1016/j.triboint.2023.108321 ↗
15. Tribological response of groove-textured surface with compressive stress on Ti6Al4V processed by laser and abrasive belt10.1016/j.triboint.2023.108265 ↗
16. The effects of simultaneous laser nitriding and texturing on surface hardness and tribological properties of Ti6Al4V10.1016/j.surfcoat.2022.128358 ↗
17. Tribological behavior of femtosecond laser-textured leaded brass10.1016/j.triboint.2021.107115 ↗
18. Enhancement of wear resistance of Ti—6Al—4V alloy by picosecond laser surface micro texturing process10.1007/s11771-018-3873-x ↗
19. Conradi, M., Kocijan, A., Klobčar, D., and Godec, M. (2020). Influence of Laser Texturing on Microstructure, Surface and Corrosion Properties of Ti-6Al-4V. Metals, 10.10.3390/met10111504 ↗
20. Role of micro-dimple array geometry on the biological and tribological performance of Ti6Al4V for biomedical applications10.1016/j.surfcoat.2019.01.113 ↗
21. Review of engineered tribological interfaces for improved boundary lubrication10.1016/j.triboint.2004.08.008 ↗
22. Investigation on bacterial adhesion and colonisation resistance over laser-machined micro patterned surfaces10.1049/mnl.2013.0109 ↗
23. Veiko, V., Karlagina, Y., Zernitckaia, E., Egorova, E., Radaev, M., Yaremenko, A., Chernenko, G., Romanov, V., Shchedrina, N., and Ivanova, E. (2022). Laser-Induced µ-Rooms for Osteocytes on Implant Surface: An In Vivo Study. Nanomaterials, 12.10.3390/nano12234229 ↗
24. Nathanael, A.J., and Oh, T.H. (2020). Biopolymer Coatings for Biomedical Applications. Polymers, 12.10.3390/polym12123061 ↗
25. Pallickal Babu, S., Sam, S., Joseph, B., Kalarikkal, N., Radhakrishnan, E.K., Nair, R., and Thomas, S. (2023). Polymer-Based Nanoscale Materials for Surface Coatings, Elsevier.
26. A chitosan/polylactic acid composite coating enhancing the corrosion resistance of the bio-degradable magnesium alloy10.1016/j.porgcoat.2023.107469 ↗
27. PEO/Polymer hybrid coatings on magnesium alloy to improve biodegradation and biocompatibility properties10.1016/j.surfin.2022.102495 ↗
28. Polylactic acid coating on a biodegradable magnesium alloy: An in vitro degradation study by electrochemical impedance spectroscopy10.1016/j.tsf.2012.07.090 ↗
29. Pseudopeptide polymer coating for improving biocompatibility and corrosion resistance of 316L stainless steel10.1039/C5RA17802A ↗
30. Polymer coatings on magnesium-based implants for orthopedic applications10.1002/pol.20210578 ↗
31. A review on polymer nanofibers by electrospinning and their applications in nanocomposites10.1016/S0266-3538(03)00178-7 ↗
32. Electrospinning as a Versatile Method of Composite Thin Films Fabrication for Selected Applications10.4028/www.scientific.net/SSP.293.35 ↗
33. Electrospinning polycaprolactone/collagen fiber coatings for enhancing the corrosion resistance and biocompatibility of AZ31 Mg alloys10.1016/j.colsurfa.2023.131041 ↗
34. Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy10.1016/j.colsurfa.2012.12.009 ↗
35. Osteogenic composite nanocoating based on nanohydroxyapatite, strontium ranelate and polycaprolactone for titanium implants10.1016/S1003-6326(18)64820-4 ↗
36. Poly caprolactone/titanium dioxide nanofiber coating on AM50 alloy for biomedical application10.1016/j.jma.2020.07.003 ↗
37. Enhanced corrosion resistance and biocompatibility of AZ31 Mg alloy using PCL/ZnO NPs via electrospinning10.1016/j.apsusc.2016.10.092 ↗
38. Tailoring metallurgical and biological characteristics of Ti–6Al–4V alloy by synergetic application of Nd:YAG laser and drug-loaded electrospun PVA10.1016/j.jmrt.2023.04.044 ↗
39. Bioactive response of PMMA coating obtained by electrospinning on ISO5832-9 and Ti6Al4V biomaterials10.1016/j.surfcoat.2021.127033 ↗
40. Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy10.1016/j.apsusc.2018.09.012 ↗
41. Nano hydroxyapatite-polysulfone coating on Ti-6Al-4V substrate by electrospinning10.3139/146.110974 ↗
42. Replicable multilayered nanofibrous patterns on a flexible film10.1021/la102467u ↗
43. Near-field electrospinning on nonconductive substrates using AC fields10.1016/j.procir.2020.04.157 ↗
44. Electrospinning onto Insulating Substrates by Controlling Surface Wettability and Humidity10.1186/s11671-017-2380-6 ↗
45. A review on the wettability of dental implant surfaces II: Biological and clinical aspects10.1016/j.actbio.2014.03.032 ↗
46. Experimental analysis and predictive modelling of Ti6Al4V laser surface texturing for biomedical applications10.1016/j.surfin.2022.102466 ↗
47. Reggio, C., Barberi, J., Ferraris, S., and Spriano, S. (2023). Functionalization of Ti6Al4V Alloy with Polyphenols: The Role of the Titanium Surface Features and the Addition of Calcium Ions on the Adsorption Mechanism. Metals, 13.10.3390/met13081347 ↗
48. Sheela, S., AlGhalban, F.M., Khalil, K.A., Laoui, T., and Gopinath, V.K. (2022). Synthesis and Biocompatibility Evaluation of PCL Electrospun Membranes Coated with MTA/HA for Potential Application in Dental Pulp Capping. Polymers, 14.10.3390/polym14224862 ↗
49. Effect of TiO2 Powder on the Surface Morphology of Micro/Nanoporous Structured Hydrophobic Fluoropolymer Based Composite Material
50. Factors determining wettability of superhydrophobic paper prepared by spraying nanoparticle suspensions10.1016/j.colsurfa.2013.05.034 ↗
51. Photofunctionalised Ti6Al4V implants enhance early phase osseointegration10.1302/2046-3758.65.BJR-2016-0221.R1 ↗
52. Role of surface oxygen-to-metal ratio on the wettability of rare-earth oxides10.1063/1.4907756 ↗
53. Improving corrosion resistance of Ti–6Al–4V alloy through plasma-assisted PVD deposited nitride coatings10.1016/j.corsci.2014.07.047 ↗
54. Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes10.1016/j.corsci.2016.06.009 ↗
55. The Surface Morphology and Electrochemical Properties of Pure Titanium Obtained by Selective Laser Melting Method10.4028/www.scientific.net/SSP.308.21 ↗
56. The influence of plasma-sprayed coatings on surface properties and corrosion resistance of 316L stainless steel for possible implant application10.1007/s43452-021-00297-1 ↗
57. Woźniak, A., Adamiak, M., Chladek, G., Bonek, M., Walke, W., and Bialas, O. (2020). The Influence of Hybrid Surface Modification on the Selected Properties of CP Titanium Grade II Manufactured by Selective Laser Melting. Materials, 13.10.3390/ma13122829 ↗
58. Electrochemical behavior of three CP titanium dental implants in artificial saliva10.1590/S1516-14392009000300018 ↗
59. Surface energy and wettability of van der Waals structures10.1039/C5NR06705G ↗
60. Material morphological characteristics in laser ablation of alpha case from titanium alloy10.1016/j.apsusc.2012.04.173 ↗
61. Nd:YAG laser interaction with titanium implant surfaces for medical applications10.1080/10420150701777678 ↗
62. Kosec, T., Legat, A., Kovač, J., and Klobčar, D. (2019). Influence of Laser Colour Marking on the Corrosion Properties of Low Alloyed Ti. Coatings, 9.10.3390/coatings9060375 ↗
63. Electrochemical corrosion and anisotropic tribological properties of bioinspired hierarchical morphologies on Ti-6Al-4V fabricated by laser texturing10.1016/j.triboint.2019.01.040 ↗
64. Laser surface textured titanium alloy (Ti–6Al–4V): Part 1—Surface characterization10.1016/j.apsusc.2015.06.175 ↗
65. Laser surface texturing of Ti6Al4V alloy, stainless steel and aluminium silicon alloy10.1016/j.apsusc.2018.06.060 ↗
66. Enhanced anticorrosion and antiwear properties of Ti–6Al–4V alloys with laser texture and graphene oxide coatings10.1016/j.triboint.2020.106475 ↗
68. The Effect of Atomic Layer Deposition of ZrO2 on the Physicochemical Properties of Cobalt based Alloys Intended for Prosthetic Dentistry
69. Improvement of the properties of Ti6Al7Nb titanium alloy in terms of the type of surface modification
70. Improving the corrosion resistance and bioactivity of magnesium by a carbonate conversion-polycaprolactone duplex coating approach10.1039/C9NJ06030H ↗
71. An improvement in corrosion resistance of 316L AISI coated using PCL-gelatin composite by dip-coating method10.1016/j.porgcoat.2019.01.057 ↗
72. Investigating TiO2–HA–PCL hybrid coating as an efficient corrosion resistant barrier of ZM21 Mg alloy10.1016/j.jma.2020.08.003 ↗
73. DǍnǍilǍ, E., and Benea, L. (2015, January 19–21). The effect of surface roughness on corrosion behavior of Ti-6Al-4V alloy in saliva solution. Proceedings of the 2015 E-Health and Bioengineering Conference (EHB), Iasi, Romania.10.1109/EHB.2015.7391518 ↗
74. Jeong, C., Choi, C.-H., and Sheppard, K. (2013). Nano-Engineering of Superhydrophobic Aluminum Surfaces for Anti-Corrosion. [Ph.D. Thesis, Stevens Institute of Technology]. Volume 115.
75. Corrosion Resistance of Superhydrophobic Layered Double Hydroxide Films on Aluminum10.1002/ange.200704694 ↗
76. Tunable, Superhydrophobically Stable Polymeric Surfaces by Electrospinning10.1002/ange.200461092 ↗
77. Fabrication of superhydrophobic surfaces on zinc substrates and their application as effective corrosion barriers10.1016/j.apsusc.2011.09.064 ↗
78. Preparation of superhydrophobic films on titanium as effective corrosion barriers10.1016/j.apsusc.2010.10.027 ↗
79. The corrosion and biological behavior of 3D-printed polycaprolactone/chitosan scaffolds as protective coating for Mg alloy implants10.1016/j.surfcoat.2023.130368 ↗
80. Modification of Ti6Al4V implant surfaces by biocompatible TiO2/PCL hybrid layers prepared via sol-gel dip coating: Structural characterization, mechanical and corrosion behavior10.1016/j.msec.2016.12.046 ↗
81. Corrosion and surface modification on biocompatible metals: A review10.1016/j.msec.2017.04.102 ↗
82. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
83. Ion implantation of titanium based biomaterials10.1016/j.pmatsci.2011.03.002 ↗
84. Susceptibility of Ti-6Al-4V alloy to stress corrosion cracking in a Lewis-neutral aluminium chloride-1-ethyl-3-methylimidazolium chloride ionic liquid10.1016/j.corsci.2013.07.009 ↗