journal article·2023-04-19Open access

Using Different Surface Energy Models to Assess the Interactions between Antiviral Coating Films and phi6 Model Virus

Zdenka Peršin Fratnik, Olivija Plohl, Vanja Kokol, Lidija Fras Zemljič

Abstract

High molecular weight chitosan (HMWCh), quaternised cellulose nanofibrils (qCNF), and their mixture showed antiviral potential in liquid phase, while this effect decreased when applied to facial masks, as studied in our recent work. To gain more insight into material antiviral activity, spin-coated thin films were prepared from each suspension (HMWCh, qCNF) and their mixture with a 1:1 ratio. To understand their mechanism of action, the interactions between these model films with various polar and nonpolar liquids and bacteriophage phi6 (in liquid phase) as a viral surrogate were studied. Surface free energy (SFE) estimates were used as a tool to evaluate the potential adhesion of different polar liquid phases to these films by contact angle measurements (CA) using the sessile drop method. The Fowkes, Owens–Wendt–Rabel–Kealble (OWRK), Wu, and van Oss–Chaudhury–Good (vOGC) mathematical models were used to estimate surface free energy and its polar and dispersive contributions, as well as the Lewis acid and Lewis base contributions. In addition, the surface tension SFT of liquids was also determined. The adhesion and cohesion forces in wetting processes were also observed. The estimated SFE of spin-coated films varied between mathematical models (26–31 mJ/m2) depending on the polarity of the solvents tested, but the correlation between models clearly indicated a significant dominance of the dispersion components that hinder wettability. The poor wettability was also supported by the fact that the cohesive forces in the liquid phase were stronger than the adhesion to the contact surface. In addition, the dispersive (hydrophobic) component dominated in the phi6 dispersion, and since this was also the case in the spin-coated films, it can be assumed that weak physical van der Waals forces (dispersion forces) and hydrophobic interactions occurred between phi6 and the polysaccharide films, resulting in the virus not being in sufficient contact with the tested material during antiviral testing of the material to be inactivated by the active coatings of the polysaccharides used. Regarding the contact killing mechanism, this is a disadvantage that can be overcome by changing the previous material surface (activation). In this way, HMWCh, qCNF, and their mixture can attach to the material surface with better adhesion, thickness, and different shape and orientation, resulting in a more dominant polar fraction of SFE and thus enabling the interactions within the polar part of phi6 dispersion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanofabrication and Lithography Techniques · Biosensors and Analytical Detection · Polymer Surface Interaction Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Engineering Materials and Design, Faculty of Mechanical Engineering, University of Maribor, Smetanova ul. 17, SI-2000 Maribor, Slovenia

Funding

the Slovenian Research Agency

References (66)

Show source-provided references
1. Analysis of Protein Adsorption and Binding at Biosensor Polymer Interfaces Using X-ray Photon Spectroscopy and Scanning Electrochemical Microscopy10.1021/ac0261653 ↗
2. Using Atomic Force Microscopy to Characterize the Conformational Properties of Proteins and Protein–DNA Complexes That Carry Out DNA Repair10.1016/bs.mie.2017.04.004 ↗
3. Protein-Repellent and Antimicrobial Nanoparticle Coatings from Hyaluronic Acid and a Lysine-Derived Biocompatible Surfactant10.1039/C7TB00311K ↗
4. Surface Energetics Study and Determination of the Combined Negative Hamaker Coefficient for Hepatitis C Virus Infected Human Blood Cells10.4236/jbise.2018.1111025 ↗
5. Tharwat, F.T. (2007). Rosenholm: Colloids and Interface Science Series, Vol. 2 Colloid Stability: The Role of Surface Forces, Part II, WILEY-VCH Verlag GmbH & Co. KGaA.
6. Acid–Base Surface Free Energies of Solids and the Definition of Scales in the Good–van Oss–Chaudhury Theory
7. Zdziennicka, A., Krawczyk, J., and Jańczuk, B. (2018). Wettability and Adhesion Work Prediction in the Polymer–Aqueous Solution of Surface Active Agent Systems. Colloids Interfaces, 2.10.3390/colloids2020021 ↗
8. Physico-Chemistry of Initial Microbial Adhesive Interactions--Its Mechanisms and Methods for Study10.1016/S0168-6445(99)00004-2 ↗
9. Surface Energetics to Assess Influence of Biomass-Type and Biomass–Adsorbent Interactions in Expanded Beds10.1186/s40643-021-00382-6 ↗
10. Surface Free Energy Dominates the Biological Interactions of Postprocessed Additively Manufactured Ti-6Al-4V10.1021/acsbiomaterials.2c00298 ↗
11. Habib, S., Lehocky, M., Vesela, D., Humpolíček, P., Krupa, I., and Popelka, A. (2019). Preparation of Progressive Antibacterial LDPE Surface via Active Biomolecule Deposition Approach. Polymers, 11.10.3390/polym11101704 ↗
12. Effect of the Aging of Titanium and Zirconia Abutment Surfaces on the Viability, Adhesion, and Proliferation of Cells and the Adhesion of Microorganisms10.1016/j.prosdent.2019.08.027 ↗
13. Surface Properties and Bacterial Adhesion of Bulk-Fill Composite Resins10.1016/j.jdent.2020.103317 ↗
14. Plohl, O., Fric, K., Filipić, A., Kogovšek, P., Tušek Žnidarič, M., and Zemljič, L.F. (2022). First Insights into the Antiviral Activity of Chitosan-Based Bioactive Polymers towards the Bacteriophage Phi6: Physicochemical Characterization, Inactivation Potential, and Inhibitory Mechanisms. Polymers, 14.10.3390/polym14163357 ↗
15. Chitosan and Its Antimicrobial Potential—A Critical Literature Survey10.1111/j.1751-7915.2008.00080.x ↗
16. Antimicrobial Chitosan and Chitosan Derivatives: A Review of the Structure-Activity Relationship10.1021/acs.biomac.7b01058 ↗
17. Yilmaz Atay, H. (2020). Functional Chitosan, Springer.
18. Ke, C.L., Deng, F.S., Chuang, C.Y., and Lin, C.H. (2021). Antimicrobial Actions and Applications of Chitosan. Polymers, 13.10.3390/polym13060904 ↗
19. Yan, D., Li, Y., Liu, Y., Li, N., Zhang, X., and Yan, C. (2021). Antimicrobial Properties of Chitosan and Chitosan Derivatives in the Treatment of Enteric Infections. Molecules, 26.10.3390/molecules26237136 ↗
20. Recent advance in biomass membranes: Fabrication, functional regulation, and antimicrobial applications10.1016/j.carbpol.2023.120537 ↗
21. Cationic Nanofibrillar Cellulose with High Antibacterial Properties10.1016/j.carbpol.2015.06.003 ↗
22. Nanocellulose-Based Antibacterial Materials10.1002/adhm.201800334 ↗
23. Emerging Development of Nanocellulose as an Antimicrobial Material: An Overview10.1039/D1MA00116G ↗
24. Otto, D.P., and de Villiers, M.M. (2020). Layer-by-Layer Nanocoating of Antiviral Polysaccharides on Surfaces to Prevent Coronavirus Infections. Molecules, 25.10.3390/molecules25153415 ↗
25. Application Prospect of Polysaccharides in the Development of Anti-Novel Coronavirus Drugs and Vaccines10.1016/j.ijbiomac.2020.07.106 ↗
26. Chitosan, Alginate, Hyaluronic Acid, Gums, and β-Glucan as Potent Adjuvants and Vaccine Delivery Systems for Viral Threats Including SARS-CoV-2: A Review10.1016/j.ijbiomac.2021.05.155 ↗
27. A Review of the Antiviral Activity of Chitosan, Including Patented Applications and Its Potential Use against COVID-1910.1111/jam.15202 ↗
28. Underscoring the Immense Potential of Chitosan in Fighting a Wide Spectrum of Viruses: A Plausible Molecule against SARS-CoV-2?10.1016/j.ijbiomac.2021.02.090 ↗
29. SARS-CoV-2 Inhibition Using a Mucoadhesive, Amphiphilic Chitosan That May Serve as an Anti-Viral Nasal Spray10.1038/s41598-021-99404-8 ↗
30. Novel Polymeric Inhibitors of HCoV-NL6310.1016/j.antiviral.2012.11.006 ↗
31. Milewska, A., Kaminski, K., Ciejka, J., Kosowicz, K., Zeglen, S., Wojarski, J., Nowakowska, M., Szczubiałka, K., and Pyrc, K. (2016). HTCC: Broad Range Inhibitor of Coronavirus Entry. PLoS ONE, 11.10.1371/journal.pone.0156552 ↗
32. HTCC as a Polymeric Inhibitor of SARS-CoV-2 and MERS-CoV10.1128/JVI.01622-20 ↗
33. Cationic Polymer Brush-Modified Cellulose Nanocrystals for High-Affinity Virus Binding10.1039/C4NR03584D ↗
34. Screen-printing of chitosan and cationised cellulose nanofibril coatings for integration into functional face masks with potential antiviral activity10.1016/j.ijbiomac.2023.123951 ↗
35. Binary Liquid Mixture Contact-Angle Measurements for Precise Estimation of Surface Free Energy10.1021/acs.langmuir.9b01252 ↗
36. COVID-19 Pandemic: Case Studies, Commentaries, and Opinions [COVID] Bacteriophage Phi 6 as Surrogate and Human-Harmless Viruses to Study Anti-SARS-CoV-2 Approaches
37. Chlorine Efficacy against Bacteriophage Phi6, a Surrogate for Enveloped Human Viruses, on Porous and Non-Porous Surfaces at Varying Temperatures and Humidity10.1080/10934529.2022.2101845 ↗
38. Gautam, S.D., Pant, M., and Adhikari, N.R. (2016). Comprehensive Chemistry, Part 2, Heritage Publishers and Distributors Pvt. Ltd.. [6th ed.].
39. Atthanase, D. (2023, February 06). Théorie Mécanique de La Chaleur: Dupré, Athanase, 1808–1869: Free Download, Borrow, and Streaming: Internet Archive. Available online: https://archive.org/details/thoriemcaniqued00duprgoog.
40. Attractive Forces at Interfaces10.1021/ie50660a008 ↗
41. Estimation of the Surface Free Energy of Polymers10.1002/app.1969.070130815 ↗
42. Dispersion-Polar Surface Tension Properties of Organic Solids10.1080/0021846708544582 ↗
43. Calculation of Interfacial Tension in Polymer Systems10.1002/polc.5070340105 ↗
44. Interfacial Lifshitz—Van Der Waals and Polar Interactions in Macroscopic Systems10.1021/cr00088a006 ↗
45. The Role of van Der Waals Forces and Hydrogen Bonds in “Hydrophobic Interactions” between Biopolymers and Low Energy Surfaces10.1016/0021-9797(86)90041-X ↗
46. Techniques of Measuring Contact Angles10.1007/978-1-4615-7969-4_2 ↗
47. Contact Angles and the Surface Free Energy of Solids
48. (1977). Interfacial Phenomena in Metal and Alloys. Von, L. E. Murr
49. Addison-Wesley Publishing Company, Reading/Mass. 1975, 376 S., 14,50 $. Phys. Unserer Zeit, 8, 30.10.1002/piuz.19770080108 ↗
50. A Theory for the Estimation of Surface and Interfacial Energies. I. Derivation and Application to Interfacial Tension10.1021/j150553a013 ↗
51. Krüss, C.R. (2023, March 25). Predicting the Dispersability of Particles Application Report: AR213e Two-Component Surface Energy Characterization as a Predictor of Wettability and Dispersability. Available online: www.kruss.de.
52. Wetting of Surfaces and Interfaces: A Conceptual Equilibrium Thermodynamic Approach
53. The Correlation between the Surface Energy, the Contact Angle and the Spreading Parameter, and Their Relevance for the Wetting Behaviour of DLC with Lubricating Oils10.1016/j.triboint.2013.05.007 ↗
54. Yan, Y., Li, J., Liu, Q., and Zhou, P. (2021). Evaporation Effect on Thickness Distribution for Spin-Coated Films on Rectangular and Circular Substrates. Coatings, 11.10.3390/coatings11111322 ↗
55. Components and Parameters of Liquids and Some Polymers Surface Tension at Different Temperature10.1016/j.colsurfa.2017.07.002 ↗
56. Determination of Reliable Lewis Acid–Base Surface Tension Components of a Solid in LW–AB Approach10.1016/j.jiec.2010.12.009 ↗
57. Surface Free Energy Evaluation of Well-Ordered Langmuir–Blodgett Surfaces: Comparison of Different Approaches10.1016/j.colsurfa.2005.10.025 ↗
58. Water in the Half Shell: Structure of Water, Focusing on Angular Structure and Solvation10.1021/ar900154j ↗
59. Control of Glass Surface Wettability via Esterification with N-Alkyl Alcohols
60. A Conditional Justification for the Determination of Surface Energy of Solids Using Contact Angle Methods10.1016/j.matchemphys.2019.06.008 ↗
61. Ahmed, T. (2019). Reservoir Engineering Handbook, Gulf Professional Publishing.10.1016/B978-0-12-813649-2.00013-X ↗
62. What Is the Real Value of Chitosan’s Surface Energy?10.1021/bm701199g ↗
63. Two Different Surface Properties of Regenerated Cellulose Due to Structural Anisotropy10.1295/polymj.PJ2005187 ↗
64. About the Structure of Cellulose: Debating the Lindman Hypothesis10.1007/s10570-012-9691-7 ↗
65. Strong Adhesion and Cohesion of Chitosan in Aqueous Solutions10.1021/la403124u ↗
66. Structure of the Bacteriophage Φ6 Nucleocapsid Suggests a Mechanism for Sequential RNA Packaging10.1016/j.str.2006.03.018 ↗