journal article·2025-03-25Open access

Influence of Pontic Length on the Structural Integrity of Zirconia Fixed Partial Dentures (FPDs)

Tareq Hajaj, Ioana Elena Lile, Ioana Veja, Florina Titihazan, Mihai Rominu, Meda Lavinia Negruțiu, Cosmin Sinescu, Andreea Codruta Novac, Serban Talpos Niculescu, Cristian Zaharia

Abstract

Objective: This study aims to evaluate the influence of pontic length and design on the fracture resistance of zirconia fixed dental prostheses (FDPs). By assessing different span lengths under controlled mechanical loading conditions, the research seeks to provide insights into optimizing the structural integrity of zirconia dental bridges. Materials and Methods: A total of 20 zirconia bridges were fabricated and tested in vitro. Ten bridges were designed to replace a single missing molar (tooth 46), with a pontic span of 11 mm, while the remaining ten were crafted for two missing teeth (35 and 36), featuring a longer pontic span of 17 mm. The zirconia frameworks were milled using the Wieland Zenotec® Select Hybrid system and cemented onto metal abutments with Voco Meron Plus QM resin-reinforced glass ionomer cement. The specimens were subjected to occlusal loading using a ZwickRoell ProLine Z005 testing machine at a crosshead speed of 1 mm/min until fracture occurred. Results: The mechanical testing revealed a significant correlation between pontic length and fracture resistance. The mean fracture resistance for three-unit bridges (single pontic) was 3703 N, whereas four-unit bridges (double pontic) exhibited a significantly lower resistance of 1713 N. These findings indicate that increased span length reduces the fracture resistance of zirconia restorations due to higher stress accumulation and reduced rigidity. Conclusions: This study underscores the importance of pontic length and design in determining the fracture resistance of zirconia restorations. Shorter spans exhibit greater structural stability, reinforcing the need for careful treatment planning when designing multi-unit zirconia bridges. By optimizing bridge parameters, clinicians can improve clinical outcomes and extend the longevity of zirconia prostheses in restorative dentistry.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Endodontics and Root Canal Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prostheses Technology and Dental Materials, Faculty of Dentistry, Victor Babes University of Medicine and Pharmacy, 2 Eftimie Murgu Sq., 300041 Timisoara, Romania

Research Center in Dental Medicine Using Conventional and Alternative Technologies, Faculty of Dental Medicine, Victor Babes University of Medicine and Pharmacy of Timisoara, 9 Revolutiei 1989 Ave, 300070 Timisoara, Romania

Department of Dental Medicine, Faculty of Dentistry, “Vasile Goldis” Western University of Arad, Str. Liviu Rebreanu 86, 310045 Arad, Romania

Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Victor Babes University of Medicine and Pharmacy, 2 Eftimie Murgu Sq., 300041 Timisoara, Romania

Funding

“Victor Babes” University of Medicine and Pharmacy in Timisoara, Romania

References (42)

Show source-provided references
1. Contemporary Dental Ceramic Materials, A Review: Chemical Composition, Physical and Mechanical Properties, Indications for Use10.3889/oamjms.2018.378 ↗
2. Zirconia based dental ceramics: Structure, mechanical properties, biocompatibility and applications10.1039/C6DT03484E ↗
3. The influence of altering sintering protocols on the optical and mechanical properties of zirconia: A review10.1111/jerd.12492 ↗
4. Current status of zirconia restoration10.1016/j.jpor.2013.09.001 ↗
5. Comparison of occlusal loading conditions in a lower second premolar using three-dimensional finite element analysis10.1007/s00784-013-0973-8 ↗
6. Development of model mouth for food oral processing studies: Present challenges and scopes10.1016/j.ifset.2020.102524 ↗
7. Optical properties of zirconia ceramics for esthetic dental restorations: A systematic review10.1016/j.prosdent.2017.07.009 ↗
8. Optical properties of transparent nanocrystalline yttria stabilized zirconia10.1016/j.optmat.2009.06.004 ↗
9. Dehydration Time Effect on Tooth Color Measurement: An In Vitro Study10.1055/s-0041-1741377 ↗
10. Transparent ceramics: Transmission physics and consequences for materials selection, manufacturing, and applications10.1016/j.jeurceramsoc.2008.03.025 ↗
11. Zirconia-ceramic versus metal-ceramic implant-supported multiunit fixed dental prostheses: A systematic review and meta-analysis10.4103/drj.drj_601_23 ↗
12. Zirconia in dental prosthetics: A literature review10.1016/j.jmrt.2019.06.043 ↗
13. Strength and aging resistance of monolithic zirconia: An update to current knowledge10.1016/j.jdsr.2019.09.002 ↗
14. A systematic review on the accuracy of zirconia crowns and fixed dental prostheses
15. (2025, January 18). Dentsply Sirona. Available online: www.dentsplysirona.com/.
16. VOCO GmbH (2025, January 18). Meron Plus IFU (Instructions for Use), Available online: www.voco.dental/us/Portaldata/1/Resources/products/instructions-for-use/us/meron-plus_ifu_us.pdf.
17. Clinical performance and failures of zirconia-based fixed partial dentures: A review literature10.4047/jap.2012.4.2.76 ↗
18. Alenezi, A., and Aloqayli, S. (2023). Technical complications with tooth-supported fixed dental prostheses (FDPs) of different span lengths: An up to 15-year retrospective study. BMC Oral Health, 23.10.1186/s12903-023-03121-9 ↗
19. Strength of zirconia fixed partial dentures: Review of the literature
20. Shash, Y.H. (2024). Mandibular biomechanics rehabilitated with different prosthetic restorations under normal and impact loading scenarios. BMC Oral Health, 24.10.1186/s12903-024-04681-0 ↗
21. Fracture resistance of different zirconium dioxide three-unit all-ceramic fixed partial dentures10.1080/00016350600856232 ↗
22. Do tooth-supported zirconia restorations present more technical failures related to fracture or loss of retention? Systematic review and meta-analysis10.1007/s00784-022-04573-z ↗
23. Adhesive cementation promotes higher fatigue resistance to zirconia crowns10.2341/16-002-L ↗
24. Yoon, Y., Lee, M.-J., Kang, I., and Oh, S. (2023). Evaluation of Biomechanical Stability of Teeth Tissue According to Crown Materials: A Three-Dimensional Finite Element Analysis. Materials, 16.10.3390/ma16134756 ↗
25. Effect of cementation techniques on fracture load of monolithic zirconia crowns
26. Experimental demonstration of the growth rate–lifespan trade-off10.1098/rspb.2012.2370 ↗
27. Correlations between connector geometry and strength of zirconia-based fixed partial dentures10.1016/j.matchemphys.2018.09.063 ↗
28. A Novel Design Modification to Improve Flexural Strength of Zirconia Framework: A Comparative Experimental in Vitro Study10.4103/jpbs.JPBS_146_20 ↗
29. Effect of connector configuration on the fracture load in conventional and translucent zirconia three-unit fixed dental prostheses10.4047/jap.2023.15.4.171 ↗
30. Effect of connector dimension on the fracture characteristics of cantilever posterior Zirconia bridges
31. Load-bearing capacity under fatigue and survival rates of adhesively cemented yttrium-stabilized zirconia polycrystal monolithic simplified restorations10.1016/j.jmbbm.2018.11.009 ↗
32. Residual stress estimated by nanoindentation in pontics and abutments of veneered zirconia fixed dental prostheses10.1590/1678-7757-2021-0475 ↗
33. The Zirconia Ceramic: Strengths and Weaknesses10.2174/1874210601408010033 ↗
34. Effect of connector size and design on the fracture resistance of monolithic zirconia fixed dental prosthesis10.34172/joddd.2020.039 ↗
35. Gender difference in masticatory performance in dentate adults10.1016/j.jpor.2012.02.001 ↗
36. An investigation on fatigue, fracture resistance, and color properties of aesthetic CAD/CAM monolithic ceramics10.1007/s00784-022-04833-y ↗
37. Implant-supported zirconia fixed partial dentures cantilevered in the lateral-posterior area: A 4-year clinical results10.34172/joddd.2022.041 ↗
38. Szawioła-Kirejczyk, M., Chmura, K., Gronkiewicz, K., Gala, A., Loster, J.E., and Ryniewicz, W. (2022). Adhesive cementation of zirconia based ceramics-surface modification methods literature review. Coatings, 12.10.3390/coatings12081067 ↗
39. Validation of in-vitro tests of zirconia-ceramic inlay-retained fixed partial dentures: A finite element analysis10.1016/j.dental.2019.01.017 ↗
40. Computerized optical impression making of edentulous jaws—An in vivo feasibility study10.1016/j.jpor.2019.12.003 ↗
41. Erdoğdu, M., Demirel, M.G., Mohammadi, R., Güntekin, N., and Chaleshtori, M.G. (2024). Influence of Framework Material and Abutment Configuration on Fatigue Performance in Dental Implant Systems: A Finite Element Analysis. Medicina, 60.10.3390/medicina60091463 ↗
42. Advances in zirconia-based dental materials: Properties, classification, applications, and future prospects10.1016/j.jdent.2024.105111 ↗