journal article·2023-09-09Open access

3D Filaments Based on Polyhydroxy Butyrate—Micronized Bacterial Cellulose for Tissue Engineering Applications

Matheus F. Celestino, Lais R. Lima, Marina Fontes, Igor T. S. Batista, Daniella R. Mulinari, Alessandra Dametto, Raphael A. Rattes, André C. Amaral, Rosana M. N. Assunção, Clovis A. Ribeiro, Guillermo R. Castro, Hernane S. Barud

Abstract

In this work, scaffolds based on poly(hydroxybutyrate) (PHB) and micronized bacterial cellulose (BC) were produced through 3D printing. Filaments for the printing were obtained by varying the percentage of micronized BC (0.25, 0.50, 1.00, and 2.00%) inserted in relation to the PHB matrix. Despite the varying concentrations of BC, the biocomposite filaments predominantly contained PHB functional groups, as Fourier transform infrared spectroscopy (FTIR) demonstrated. Thermogravimetric analyses (i.e., TG and DTG) of the filaments showed that the peak temperature (Tpeak) of PHB degradation decreased as the concentration of BC increased, with the lowest being 248 °C, referring to the biocomposite filament PHB/2.0% BC, which has the highest concentration of BC. Although there was a variation in the thermal behavior of the filaments, it was not significant enough to make printing impossible, considering that the PHB melting temperature was 170 °C. Biological assays indicated the non-cytotoxicity of scaffolds and the provision of cell anchorage sites. The results obtained in this research open up new paths for the application of this innovation in tissue engineering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biopolymers and Biomaterials Group, Postgraduate Program in Biotechnology, University of Araraquara (UNIARA), Araraquara 14801-320, SP, Brazil

Institute of Chemistry, University of São Paulo (USP), São Carlos 13566-590, SP, Brazil

Biosmart Nanotechnology LTDA, Araraquara 14808-162, SP, Brazil

Department of Mechanics and Energy, State University of Rio de Janeiro (UEJR), Rio de Janeiro 20550-900, RJ, Brazil

Faculty of Integrated Sciences of Pontal (FACIP), Federal University of Uberlandia (UFU), Pontal Campus, Ituiutaba 38304-402, MG, Brazil

Institute of Chemistry, São Paulo State University (UNESP), Araraquara 14800-900, SP, Brazil

Nanomedicine Research Unit (Nanomed), Center for Natural and Human Sciences, Federal University of ABC (UFABC), Santo André 09210-580, SP, Brazil

Funding

Rio de Janeiro State Foundation · National Council for Scientific and Technological Development (CNPq)

References (63)

Show source-provided references
1. Upcycling of Spent Tea Leaves and Spent Coffee Grounds into Sustainable 3D-Printing Materials: Natural Plasticization and Low-Energy Fabrication10.1021/acssuschemeng.2c07330 ↗
2. 3D Printing Hybrid Materials Using Fused Deposition Modelling for Solid Oral Dosage Forms10.1016/j.jconrel.2022.09.032 ↗
3. Application of Fused Deposition Modeling (FDM) on Bone Scaffold Manufacturing Process: A Review10.1016/j.heliyon.2022.e11701 ↗
4. Multi-Material 3D and 4D Printing: A Survey10.1002/advs.201902307 ↗
5. Additive Manufacturing of Polyhydroxyalkanoates (PHAs) Biopolymers: Materials, Printing Techniques, and Applications10.1016/j.msec.2021.112216 ↗
6. Biopolymers and Composites: Properties, Characterization and Their Applications in Food, Medical and Pharmaceutical Industries10.1016/j.jece.2021.105322 ↗
7. Correlations on Average Tensile Strength of 3D-Printed Acrylonitrile Butadiene Styrene, Polylactic Acid, and Polylactic Acid + Carbon Fiber Specimens10.1002/adem.202201413 ↗
8. 3D Printing of Polymeric Tissue Engineering Scaffolds Using Open-Source Fused Deposition Modeling10.1007/s42247-019-00048-2 ↗
9. Plastics Design Library, and Kutz, M. (2017). Applied Plastics Engineering Handbook Processing, Materials, and Applications, William Andrew Publishing. [2nd ed.].
10. Evaluation of Commercially Available Polylactic Acid (PLA) Filaments for 3D Printing Applications10.1007/s10973-018-7967-3 ↗
11. Polylactic Acid Scaffolds Obtained by 3D Printing and Modified by Oxygen Plasma
12. 3D Printer Nozzle Modification to Obtain Scaffolds for Use in Regenerative Medicine10.33448/rsd-v11i6.29472 ↗
13. Physical, Mechanical and Biological Performance of PHB-Chitosan/MWCNTs Nanocomposite Coating Deposited on Bioglass Based Scaffold: Potential Application in Bone Tissue Engineering10.1016/j.ijbiomac.2020.02.266 ↗
14. Modified Poly(3-Hydroxybutyrate)-Based Scaffolds in Tissue Engineering Applications: A Review10.1016/j.ijbiomac.2020.10.255 ↗
15. In Vivo and Post-Synthesis Strategies to Enhance the Properties of PHB-Based Materials: A Review10.3389/fbioe.2020.619266 ↗
16. Alternative Optimization Routes for Improving the Performance of Poly(3-Hydroxybutyrate) (PHB) Based Plastics10.1016/j.jclepro.2021.128555 ↗
17. Vayshbeyn, L.I., Mastalygina, E.E., Olkhov, A.A., and Podzorova, M. (2023). V Poly(Lactic Acid)-Based Blends: A Comprehensive Review. Appl. Sci., 13.10.3390/app13085148 ↗
18. The Influence of the Coconut Fiber Treated as Reinforcement in PHB (Polyhydroxybutyrate) Composites10.1016/j.mtcomm.2018.12.006 ↗
19. Bacterial Cellulose/Poly(3-Hydroxybutyrate) Composite Membranes10.1016/j.carbpol.2010.09.049 ↗
20. Antimicrobial Bacterial Cellulose-Silver Nanoparticles Composite Membranes10.1155/2011/721631 ↗
21. Fabrication of Noncytotoxic Functional Siloxane-Coated Bacterial Cellulose Nanocrystals10.1021/acsapm.1c01437 ↗
22. Preparation and Characterization of a Bacterial Cellulose/Silk Fibroin Sponge Scaffold for Tissue Regeneration10.1016/j.carbpol.2015.04.007 ↗
23. Cellulose and Its Derivatives: Towards Biomedical Applications10.1007/s10570-020-03674-w ↗
24. Bacterial Cellulose as Potential Dressing and Scaffold Material: Toward Improving the Antibacterial and Cell Adhesion Properties
25. Gorgieva, S. (2020). Bacterial Cellulose as a Versatile Platform for Research and Development of Biomedical Materials. Processes, 8.10.3390/pr8050624 ↗
26. Potential Applications of Bacterial Cellulose and Its Composites for Cancer Treatment10.1016/j.ijbiomac.2020.12.042 ↗
27. Raut, M.P., Asare, E., Syed Mohamed, S.M., Amadi, E.N., and Roy, I. (2023). Bacterial Cellulose-Based Blends and Composites: Versatile Biomaterials for Tissue Engineering Applications. Int. J. Mol. Sci., 24.10.3390/ijms24020986 ↗
28. Additive Manufacturing of Nanocellulose Based Scaffolds for Tissue Engineering: Beyond a Reinforcement Filler10.1016/j.carbpol.2020.117159 ↗
29. Nanocellulose as a Natural Source for Groundbreaking Applications in Materials Science: Today’s State10.1016/j.mattod.2018.02.001 ↗
30. Upcycling Microbial Cellulose Scraps into Nanowhiskers with Engineered Performance as Fillers in All-Cellulose Composites10.1021/acsami.0c12392 ↗
31. Mechanical Activation and Characterization of Micronized Cellulose Particles from Pulp Fiber10.1016/j.indcrop.2019.111750 ↗
32. Synthesis and Characterization of Bacterial Cellulose from Citrus-Based Sustainable Resources10.1021/acsomega.8b01315 ↗
33. (2009). Biological Evaluation of Medical Devices. Part 5: Tests for Cytotoxicity: In Vitro Methods, 3ed. (Standard No. ISO 10993-5).
34. (2012). Biological Evaluation of Medical Devices. Part 12: Sample Preparation and Reference Materials, 4ed. (Standard No. ISO 10993-12).
35. Rapid Colorimetric Assay for Cellular Growth and Survival: Application to Proliferation and Cytotoxicity Assays10.1016/0022-1759(83)90303-4 ↗
36. Solution Blow Spinning Fibres: New Immunologically Inert Substrates for the Analysis of Cell Adhesion and Motility10.1016/j.actbio.2017.01.020 ↗
37. Reynes, J.F., Isoni, V., and García, F. (2023). Tinkering with Mechanochemical Tools for Scale Up. Angew. Chem., e202300819. First published online: 28 April 2023.10.1002/anie.202300819 ↗
38. Martínez, L.M., Cruz-Angeles, J., Vázquez-Dávila, M., Martínez, E., Cabada, P., Navarrete-Bernal, C., and Cortez, F. (2022). Mechanical Activation by Ball Milling as a Strategy to Prepare Highly Soluble Pharmaceutical Formulations in the Form of Co-Amorphous, Co-Crystals, or Polymorphs. Pharmaceutics, 14.10.3390/pharmaceutics14102003 ↗
39. Feng, X., Lin, X., Deng, K., Yang, H., and Yan, C. (2023). Facile Ball Milling Preparation of Flame-Retardant Polymer Materials: An Overview. Molecules, 28.10.3390/molecules28135090 ↗
40. Joy, J., Krishnamoorthy, A., Tanna, A., Kamathe, V., Nagar, R., and Srinivasan, S. (2022). Recent Developments on the Synthesis of Nanocomposite Materials via Ball Milling Approach for Energy Storage Applications. Appl. Sci., 12.10.3390/app12189312 ↗
41. Effect of Ball-Milling on Crystallinity Index, Degree of Polymerization and Thermal Stability of Cellulose10.1016/j.biortech.2018.09.029 ↗
42. Effects of Ball Milling on the Structure of Cotton Cellulose10.1007/s10570-018-02230-x ↗
43. Cellulose Crystallinity Index: Measurement Techniques and Their Impact on Interpreting Cellulase Performance10.1186/1754-6834-3-10 ↗
44. Effect of Ball-Milling Pretreatment of Cellulose on Its Photoreforming for H2 Production10.1021/acssuschemeng.1c07301 ↗
45. Cellulose Nanocrystals from Bacterial Cellulose
46. Evaluation of Usefulness of 2DCorr Technique in Assessing Physicochemical Properties of Bacterial Cellulose10.1016/j.carbpol.2016.12.063 ↗
47. Zheng, Y., Fu, Z., Li, D., and Wu, M. (2018). Effects of Ball Milling Processes on the Microstructure and Rheological Properties of Microcrystalline Cellulose as a Sustainable Polymer Additive. Materials, 11.10.3390/ma11071057 ↗
48. A Multitechnique Approach to Assess the Effect of Ball Milling on Cellulose10.1016/j.carbpol.2011.07.047 ↗
49. Organic Solvent-Free and Efficient Manufacture of Functionalized Cellulose Nanocrystals via One-Pot Tandem Reactions10.1039/c3gc40965a ↗
50. dos S. Variation of the Milling Conditions in the Obtaining of Nanocellulose from the Paper Sludge
51. Extensive Dry Ball Milling of Wheat and Rye Bran Leads to in Situ Production of Arabinoxylan Oligosaccharides through Nanoscale Fragmentation10.1021/jf901870r ↗
52. Effect of a Milling Pre-Treatment on the Enzymatic Hydrolysis of Carbohydrates in Brewer’s Spent Grain10.1016/j.biortech.2012.04.043 ↗
53. Regularity and Mechanism of Wheat Straw Properties Change in Ball Milling Process at Cellular Scale10.1016/j.biortech.2017.04.115 ↗
54. Mechanical Fragmentation of Corncob at Different Plant Scales: Impact and Mechanism on Microstructure Features and Enzymatic Hydrolysis10.1016/j.biortech.2016.01.029 ↗
55. Mechanochemical Deconstruction of Lignocellulosic Cell Wall Polymers with Ball-Milling10.1016/j.biortech.2019.121364 ↗
56. Microbial Production, Ultrasound-Assisted Extraction and Characterization of Biopolymer Polyhydroxybutyrate (PHB) from Terrestrial (P. hysterophorus) and Aquatic (E. crassipes) Invasive Weeds10.1016/j.biortech.2017.03.117 ↗
57. Vahabi, H., Michely, L., Moradkhani, G., Akbari, V., Cochez, M., Vagner, C., Renard, E., Saeb, M.R., and Langlois, V. (2019). Thermal Stability and Flammability Behavior of Poly(3-Hydroxybutyrate) (PHB) Based Composites. Materials, 12.10.3390/ma12142239 ↗
58. Particles of Coffee Wastes as Reinforcement in Polyhydroxybutyrate (PHB) Based Composites10.1590/1516-1439.318114 ↗
59. Production and Characterization of Poly-3-Hydroxybutyrate from Crude Glycerol by Bacillus Sphaericus NII 0838 and Improving Its Thermal Properties by Blending with Other Polymers10.1590/S1516-89132011000400019 ↗
60. Screening and Comparative Assay of Poly-Hydroxyalkanoates Produced by Bacteria Isolated from the Gavkhooni Wetland in Iran and Evaluation of Poly-β-Hydroxybutyrate Production by Halotolerant Bacterium Oceanimonas Sp. GK110.1007/s13213-014-0887-y ↗
61. Palm Fibers Residues from Agro-Industries as Reinforcement in Biopolymer Filaments for 3D-Printed Scaffolds10.1007/s12221-021-0936-7 ↗
62. Codreanu, A., Balta, C., Herman, H., Cotoraci, C., Mihali, C.V., Zurbau, N., Zaharia, C., Rapa, M., Stanescu, P., and Radu, I.-C. (2020). Bacterial Cellulose-Modified Polyhydroxyalkanoates Scaffolds Promotes Bone Formation in Critical Size Calvarial Defects in Mice. Materials, 13.10.3390/ma13061433 ↗
63. Kohan, M., Lancoš, S., Schnitzer, M., Živčák, J., and Hudák, R. (2022). Analysis of PLA/PHB Biopolymer Material with Admixture of Hydroxyapatite and Tricalcium Phosphate for Clinical Use. Polymers, 14.10.3390/polym14245357 ↗