journal article·2023-06-20Open access

Investigation of the Real-Time Release of Doxycycline from PLA-Based Nanofibers

Noémi-Izabella Farkas, Laura Marincaș, Lucian Barbu-Tudoran, Réka Barabás, Graziella Liana Turdean

Abstract

Electrospun mats of PLA and PLA/Hap nanofibers produced by electrospinning were loaded with doxycycline (Doxy) through physical adsorption from a solution with initial concentrations of 3 g/L, 7 g/L, and 12 g/L, respectively. The morphological characterization of the produced material was performed using scanning electron microscopy (SEM). The release profiles of Doxy were studied in situ using the differential pulse voltammetry (DPV) electrochemical method on a glassy carbon electrode (GCE) and validated through UV-VIS spectrophotometric measurements. The DPV method has been shown to be a simple, rapid, and advantageous analytical technique for real-time measurements, allowing accurate kinetics to be established. The kinetics of the release profiles were compared using model-dependent and model-independent analyses. The diffusion-controlled mechanism of Doxy release from both types of fibers was confirmed by a good fit to the Korsmeyer–Peppas model.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, Faculty of Chemistry and Chemical Engineering, Babeș-Bolyai University, 11 Arany János Street, 400028 Cluj-Napoca, Romania

Department of Chemistry, Faculty of Chemistry and Chemical Engineering, Babeș-Bolyai University, 11 Arany János Street, 400028 Cluj-Napoca, Romania

Department of Molecular Biology and Biotechnology, Faculty of Biology and Geology, Babeș-Bolyai University, 1 Mihail Kogălniceanu Street, 400084 Cluj-Napoca, Romania

National Institute for Research and Development of Isotopic and Molecular Technologies, 67-103 Donath Street, 400293 Cluj-Napoca, Romania

Department of Chemistry and Chemical Engineering of Hungarian Line of Study, Faculty of Chemistry and Chemical Engineering, Babeș-Bolyai University, 11 Arany János Street, 400028 Cluj-Napoca, Romania

Funding

CNCS-UEFISCDI

References (60)

Show source-provided references
1. A Summary of Electrospun Nanofibers as Drug Delivery System: Drugs Loaded and Biopolymers Used as Matrices10.2174/1567201815666180723114326 ↗
2. Enhanced drug delivery, mechanical properties and antimicrobial activities in poly(lactic acid) nanofiber with mesoporous Fe3O4-COOH nanoparticles10.1016/j.colsurfa.2018.09.012 ↗
3. Electrospinning of linezolid loaded PLGA nanofibers: Effect of solvents on its spinnability, drug delivery, mechanical properties, and antibacterial activities10.1080/03639045.2019.1706550 ↗
4. Characteristics of curcumin-loaded poly (lactic acid) nanofibers for wound healing10.1007/s10853-013-7527-y ↗
5. Polycaprolactone nanofibers loaded oxytetracycline hydrochloride and zinc oxide for treatment of periodontal disease10.1016/j.msec.2019.109798 ↗
6. Long-term drug delivery using implantable electrospun woven polymeric nanotextiles. Nanomedicine Nanotechnology
7. Electrospinning nanofiber technology: A multifaceted paradigm in biomedical applications10.1039/D1NJ04159B ↗
8. Electrospun Nanofibers for Drug Delivery and Biosensing10.1021/acsbiomaterials.9b00853 ↗
9. 4-Phosphatephenyl-modified glassy carbon electrode for real-time and simultaneous electrochemical monitoring of paracetamol and diclofenac release from electrospun nanofibers10.1039/C5AY02112J ↗
10. Kasoju, N., and Ye, H. (2021). Biomedical Applications of Electrospinning and Electrospraying, Woodhead Publishing. [1st ed.].10.1016/B978-0-12-822476-2.00015-7 ↗
11. Biomedical application and controlled drug release of electrospun fibrous materials10.1016/j.msec.2018.05.007 ↗
12. The influence of fiber diameter of electrospun poly(lactic acid) on drug delivery10.1007/s12221-012-1120-x ↗
13. Cellulose nanocrystals/polyethylene glycol as bifunctional reinforcing/compatibilizing agents in poly(lactic acid) nanofibers for controlling long-term in vitro drug release10.1007/s10570-017-1431-6 ↗
14. Coating biodegradable magnesium alloys with electrospun poly-L-lactic acid-åkermanite-doxycycline nanofibers for enhanced biocompatibility, antibacterial activity, and corrosion resistance10.1016/j.surfcoat.2019.124898 ↗
15. A sandwich-like structure composite electrospun membrane of polylactic acid/nano-hydroxyapatite and polyvinyl alcohol/sodium alginate/nano-hydroxyapatite for skull defect repair10.1016/j.matdes.2021.109957 ↗
16. Eggshell Based Nano-Engineered Hydroxyapatite and Poly(lactic) Acid Electrospun Fibers as Potential Tissue Scaffold10.1155/2019/6762575 ↗
17. Hydroxyapatite/silver electrospun fibers for anti-infection and osteoinduction10.1016/j.jare.2019.10.002 ↗
18. Real-time electrochemical monitoring of drug release from therapeutic nanoparticles10.1016/j.jconrel.2009.08.002 ↗
19. Solid lipid nanoparticles for thermoresponsive targeting: Evidence from spectrophotometry, electrochemical, and cytotoxicity studies10.2147/IJN.S147506 ↗
20. 4-Phosphatephenyl Covalently Modified Glassy Carbon Electrode for Real-Time Electrochemical Monitoring of Paracetamol Release from Electrospun Nanofibers10.1002/elan.201200230 ↗
21. Square-Wave Voltammetry as Analytical Tool for Real-Time Study of Controlled Naproxen Releasing from Cellulose Derivative Materials10.1002/elan.201500011 ↗
22. Recent reports on electrochemical determination of selected antibiotics in pharmaceutical formulations: A mini review10.1016/j.elecom.2020.106863 ↗
23. Carbon dots from green sources as efficient sensor and as anticancer agent10.1016/j.jphotochem.2022.114237 ↗
24. D’Souza, S. (2014). A Review of In Vitro Drug Release Test Methods for Nano-Sized Dosage Forms. Adv. Pharm., 2014.10.1155/2014/304757 ↗
25. Differential pulse polarography: A suitable technique for monitoring drug release from polymeric nanoparticle dispersions10.1016/S0003-2670(03)00788-8 ↗
26. Piroxicam-Loaded Nanostructured Lipid Nanocarriers Modified with Salicylic Acid: The Effect on Drug Release10.1002/slct.201904227 ↗
27. Controlled release of drugs from cellulose acetate matrices produced from sugarcane bagasse: Monitoring by square-wave voltammetry10.3109/03639045.2015.1107093 ↗
28. Drug Release from Polymer Thin Films and Gel Pellets: Insights from Programmed Microplate Electroanalysis10.1002/cplu.202000129 ↗
29. Square Wave Voltammetry: An Alternative Technique to Determinate Piroxicam Release Profiles from Nanostructured Lipid Carriers10.1002/cphc.201600226 ↗
30. Electrochemical behavior and assay of anti-Parkinson drug selegiline using cathodic adsorptive stripping square wave voltammetry in bulk form
31. Simple and fast analytical method for the evaluation of the encapsulation and release profile of doxorubicin from drug delivery systems10.31925/farmacia.2021.4.6 ↗
32. Microscopic and spectroscopic investigation of bioactive glasses for antibiotic controlled release10.1016/j.molstruc.2013.02.016 ↗
33. Differential pulse voltammetric assay of antibacterial drug Doxycycline hyclate
34. Cánovas, R., Sleegers, N., van Nuijs, A.L.N., and De Wael, K. (2021). Tetracycline antibiotics: Elucidating the electrochemical fingerprint and oxidation pathway. Chemosensors, 9.10.3390/chemosensors9070187 ↗
35. Sensitive and selective electrochemical determination of doxycycline in pharmaceutical formulations using poly(dipicrylamine) modified glassy carbon electrode10.1016/j.sbsr.2022.100507 ↗
36. Voltammetry and amperometric detection of tetracyclines at multi-wall carbon nanotube modified electrodes10.1007/s00216-007-1505-7 ↗
37. Electrochemical behavior and voltammetric determination of chloramphenicol and doxycycline using a glassy carbon electrode modified with single-walled carbon nanohorns10.1002/elan.202100354 ↗
38. Determination of tetracycline in honey by voltammetry10.1016/j.proche.2015.10.056 ↗
39. Voltammetric behavior and determination of doxycycline in pharmaceuticals at molecularly imprinted and non-imprinted overoxidized polypyrrole electrodes10.1016/j.jpba.2013.06.009 ↗
40. Farkas, N.-I., Marinca, L., Barabás, R., Turdean, G.L., Cadar, O., and Barbu-Tudoran, L. (2022). Preparation and Characterization of Doxycycline-Loaded Electrospun PLA/HAP Nanofibers as a Drug Delivery System. Materials, 15.10.3390/ma15062105 ↗
41. Adsorption and desorption behavior of natural and synthetic active compounds on hydroxyapatite-based nanocomposites10.1016/j.ceramint.2020.11.226 ↗
42. FDA guidance for industry 1 dissolution testing of immediate release solid oral dosage forms10.14227/DT040497P15 ↗
43. A Review on the Secondary Surface Morphology of Electrospun Nanofibers: Formation Mechanisms, Characterizations, and Applications10.1002/slct.201903981 ↗
44. Stereocomplex poly(lactic acid)-based composite nanofiber membranes with highly dispersed hydroxyapatite for potential bone tissue engineering10.1016/j.compscitech.2020.108107 ↗
45. Biomaterials Characterization and antibacterial activity of amoxicillin-loaded electrospun nano-hydroxyapatite/poly(lactic-co-glycolic acid) composite nano fi bers10.1016/j.biomaterials.2012.10.071 ↗
46. Nanofibrous poly(lactic acid)/hydroxyapatite composite scaffolds for guided tissue regeneration10.1002/mabi.200700107 ↗
47. Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy10.1016/j.colsurfa.2012.12.009 ↗
48. Polymeric nanofibers: Targeted gastro-retentive drug delivery systems10.3109/1061186X.2014.965715 ↗
49. Adsorption and sustained release of doxorubicin from N-carboxymethyl chitosan/polyvinyl alcohol/poly(ε-caprolactone) composite and core-shell nanofibers10.1016/j.jddst.2021.102937 ↗
50. Adsorption, and controlled release of doxorubicin from cellulose acetate/polyurethane / multi-walled carbon nanotubes composite nanofibers10.1088/1361-6528/ac467b ↗
51. Tuning drug delivery from conducting polymer films for accurately controlled release of charged molecules10.1016/j.jconrel.2019.05.017 ↗
52. Statistics and Chemometrics for Analytical Chemistry
53. Effects of drug concentration and PLGA addition on the properties of electrospun ampicillin trihydrate-loaded PLA nanofibers
54. Morphological Structures and Drug Release Effect of Multiple Electrospun Nanofibre Membrane Systems Based on PLA, PCL, and PCL/Magnetic Nanoparticle Composites10.1155/2022/5190163 ↗
55. Klabukov, I., Balyasin, M., Krasilnikova, O., Tenchurin, T., Titov, A., Krasheninnikov, M., Mudryak, D., Sulina, Y., Shepelev, A., and Chvalun, S. (2023). Angiogenic Modification of Microfibrous Polycaprolactone by pCMV-VEGF165 Plasmid Promotes Local Vascular Growth after Implantation in Rats. Int. J. Mol. Sci., 24.10.3390/ijms24021399 ↗
56. Zhang, T., Xiang, Z., Liu, L., Ma, Z., Panteleev, M., Ataullakhanov, F.I., and Shi, Q. (2023). Bioinspired Platelet-Anchored Electrospun Meshes for Tight Inflammation Manipulation and Chronic Diabetic Wound Healing. Macromol. Biosci., 2300036.10.1002/mabi.202300036 ↗
57. Electrospun tetracycline hydrochloride loaded zein/gum tragacanth/poly lactic acid nanofibers for biomedical application10.1016/j.ijbiomac.2020.09.225 ↗
58. Modeling the permeability of multiaxial electrospun poly(ε-caprolactone)-gelatin hybrid fibers for controlled doxycycline release10.1016/j.msec.2017.03.093 ↗
59. Sustainable Drug Delivery of Famotidine Using Chitosan-Functionalized Graphene Oxide as Nanocarrier10.1002/gch2.201900002 ↗
60. Polyaniline-coated titanium oxide nanoparticles and simvastatin-loaded poly(ε-caprolactone) composite nanofibers scaffold for bone tissue regeneration application10.1016/j.colsurfb.2020.111007 ↗