Evaluation of the Corrosion Resistance of Different Types of Orthodontic Fixed Retention Appliances: A Preliminary Laboratory Study
Source abstract
Abstract
(i) Objective: The present study aimed to compare the electrochemical corrosion resistance of six different types of fixed lingual retainer wires used as fixed retention appliances in an in vitro study. (ii) Methods: In the study, two different Ringer solutions, with pH 7 and pH 3.5, were used. Six groups were formed with five retainer wires in each group. In addition, 3-braided stainless steel, 6-braided stainless steel, Titanium Grade 1, Titanium Grade 5, Gold, and Dead Soft retainer wires were used. The corrosion current density (icorr), corrosion rate (CR), and polarization resistance (Rp) were determined from the Tafel polarization curves. (iii) Results: The corrosion current density of the Gold retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). The corrosion rate of the Dead Soft retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). The polarization resistance of the Titanium Grade 5 retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). As a result of Scanning Electron Microscope (SEM) images, pitting corrosion was not observed in the Titanium Grade 1, Titanium Grade 5 and Gold retainer groups, while pitting corrosion was observed in the other groups. (iv) Conclusion: From a corrosion perspective, although the study needs to be evaluated in vivo, the Titanium Grade 5 retainer group included is in this in vitro study may be more suitable for clinical use due to its high electrochemical corrosion resistance and the lack of pitting corrosion observed in the SEM images.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Orthodontics and Dentofacial Orthopedics · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Orthodontics, Faculty of Dentistry, Zonguldak Bulent Ecevit University, Zonguldak 67100, Turkey
Department of Metallurgical and Materials Engineering, Faculty of Engineering, Zonguldak Bulent Ecevit University, Zonguldak 67100, Turkey
Department of Orthodontics, Faculty of Dentistry, Tekirdag Namık Kemal University, Tekirdağ 59030, Turkey
References (58)
Show source-provided references
1. Teeth movement 12 years after orthodontic treatment with and without retainer: Relapse or usual changes?
2. Retention and stability: A review of the literature10.1016/S0889-5406(98)70212-4 ↗
3. Retention in orthodontics10.1038/sj.bdj.2015.47 ↗
4. Long-term experience with direct-bonded retainers: Update and clinical advice
5. Orthodontic retention patterns in the United Kingdom10.1179/14653120723040 ↗
6. Results of a survey-based study to identify common retention practices in the United States10.1016/j.ajodo.2008.03.023 ↗
7. An overview of orthodontic wires
8. Orthodontic wires and its corrosion-The specific case of stainless steel and beta-titanium10.1016/j.jds.2014.07.002 ↗
9. Gerengi, H. (2008). Tafel Polarizasyon (TP), Lineer Polarizasyon (LP), Harmonik Analiz (HA) ve Dinamik Elektrokimyasal İmpedans Spektroskopisi (DEIS) Yöntemleriyle Düşük Karbon Çeliği (AISI 1026), Pirinç-MM55 ve Nikalium-118 Alaşımlarının Yapay Deniz Suyunda Korozyon Davranışları ve Pirinç Alaşımlarına Benzotriazol’ün İnhibitör Etkisinin Araştırılması. [Ph.D. Thesis, Eskişehir Osmangazi University, Institute of Science, Department of Chemistry].
10. Effect of PMMA sealing treatment on the corrosion behavior of plasma electrolytic oxidized titanium dental implants in fluoride-containing saliva solution10.1088/2053-1591/aca7b5 ↗
11. Effects of co-incorporated ternary elements on biocorrosion stability, antibacterial efficacy, and cytotoxicity of plasma electrolytic oxidized titanium for implant dentistry10.1016/j.matchemphys.2021.125436 ↗
12. Akın, E. (2019). Examination of Corrosion Effects on Orthodontic Brackets under Simulated Gastroesophageal Reflux Disease (GERD)–An In-Vitro Study. [PhD Thesis, Yeditepe University Institute of Health Sciences].
13. Evaluation by electrochemical tests of the passive film stability of equiatomic Ni-Ti alloy also in presence of stress-induced martensite10.1002/(SICI)1097-4636(200007)51:1<47::AID-JBM7>3.0.CO;2-P ↗
14. Corrosion resistance of stressed NiTi and stainless steel orthodontic wires in acid artificial saliva10.1002/jbm.a.10463 ↗
15. Comparison of metal release from new and recycled bracket-archwire combinations
16. Corrosion behaviour of metallic biomaterials used as orthodontic wires
17. Corrosion resistance of surface modified nickel titanium archwires10.2319/021813-140.1 ↗
18. Release of metal ions from orthodontic appliances by in vitro studies: A systematic literature review10.1007/s12011-010-8670-9 ↗
19. Metallic ion content and damage to the DNA in oral mucosa cells of children with fixed orthodontic appliances10.1007/s10534-011-9448-z ↗
20. General review of titanium toxicity10.1186/s40729-019-0162-x ↗
21. Titanium, sinusitis, and the yellow nail syndrome10.1007/s12011-010-8828-5 ↗
22. The effect of glow discharge nitriding on the corrosion resistance of stainless steel orthodontic arches in artificial saliva solution
23. The corrosion resistance, cytotoxicity, and antibacterial properties of lysozyme coatings on orthodontic composite arch wires10.1039/D0RA02988B ↗
24. Corrosion resistance of orthodontic wire made of SS 18/8 alloy in artificial saliva in presence of Halls menthol candy investigated by electrochemical studies
25. Nespoli, A., Passaretti, F., Szentmiklósi, L., Maróti, B., Placidi, E., Cassetta, M., Yada, R.Y., Farrar, D.H., and Tian, K.V. (2022). Biomedical NiTi and β-Ti Alloys: From Composition, Microstructure and Thermo-Mechanics to Application. Metals, 25.10.3390/met12030406 ↗
26. Compositional studies of functional orthodontic archwires using prompt-gamma activation analysis at a pulsed neutron source10.1039/C7JA00065K ↗
27. Orthodontic archwire composition and phase analyses by neutron spectroscopy10.4012/dmj.2016-206 ↗
28. Tian, K.V., Passaretti, F., Nespoli, A., Placidi, E., Condò, R., Andreani, C., Licoccia, S., Chass, G.A., Senesi, R., and Cozza, P. (2019). Composition—Nanostructure steered performance predictions in steel wires. Nanomaterials, 9.10.3390/nano9081119 ↗
29. Effects of Various Mouthwashes on the Orthodontic Nickel-Titanium Wires: Corrosion Analysis10.25301/JPDA.291.30 ↗
30. Fabrication of silver nanoparticles embedded into polyvinyl alcohol (Ag/PVA) composite nanofibrous films through electrospinning for antibacterial and surface-enhanced Raman scattering (SERS) activities10.1016/j.msec.2016.07.015 ↗
31. Electrochemical and XPS studies of corrosion behavior of Ti-23Nb-0.7Ta-2Zr-O alloy in Ringer’s solution10.1016/j.matchemphys.2008.08.043 ↗
32. In vitro evaluation of the electrochemical behaviour of stainless steel and Ni-Ti orthodontic archwires at different temperatures10.1093/ejo/cjr055 ↗
33. Corrosion of Orthodontic Arch-Wires in Artificial Saliva Environment
34. Corrosion evaluation of orthodontic wires in artificial saliva solutions by using response surface methodology10.1590/S1516-14392012005000172 ↗
35. Ion release from NiTi orthodontic wires in artificial saliva with various acidities10.1016/S0142-9612(03)00188-1 ↗
36. Standard test method for conducting potentiodynamic polarization resistance measurements
37. Corrosion resistance of three orthodontic brackets: A comparative study of three fluoride mouthwashes10.1093/ejo/cji050 ↗
38. The effect of pH, fluoride and tribocorrosion on the surface properties of dental archwires10.1016/j.msec.2017.04.050 ↗
39. Comparative assessment of the corrosion process of orthodontic archwires made of stainless steel, titanium–molybdenum and nickel–titanium alloys10.1016/j.acme.2018.01.017 ↗
40. Corrosion Behavior and In Vitro Cytotoxicity of Ni-Ti and Stainless Steel Arch Wires Exposed to Lysozyme, Ovalbumin, and Bovine Serum Albumin10.1021/acsomega.0c02312 ↗
41. Effect of fruit juices and chloride ions on the corrosion behavior of orthodontic archwire10.1080/10667857.2018.1473992 ↗
42. Luqman, M., Seikh, A.H., Sarkar, A., Ragab, S.A., Mohammed, J.A., Ijaz, M.F., and Abdo, H.S. (2020). A Comparative Study of the Electrochemical Behavior of α and β Phase Ti6Al4V Alloy in Ringer’s Solution. Crystals, 10.10.3390/cryst10030190 ↗
43. Corrosion Behavior of Titanium and Titanium Alloys in Ringer’s Solution
44. The effect of pH on the corrosion of dental metal alloys10.1046/j.1365-2842.2000.00549.x ↗
45. Groen, T.L. (2020). Corrosion Properties of Various Orthodontic Fixed Retention Wires. [Master Thesis, Faculty of the Graduate School, Marquette University].
46. Corrosion behaviour of dental metals and alloys in different media10.1046/j.1365-2842.1998.00305.x ↗
47. In vitro corrosion behavior of 13 prosthodontic alloys
48. In vitro corrosion behaviour and metallic ion release of different prosthodontic alloys10.1111/j.1875-595X.1999.tb00538.x ↗
49. Tamam, E. (2008). Ağartma Işleminin Temel Metal Alaşımı Üzerindeki Etkisinin in Vitro Değerlendirilmesi. [PhD Thesis, Ankara University, Health Sciences Institute].
50. Surface analysis and corrosion resistance of different stainless steel orthodontic brackets in artificial saliva
51. Dental uygulamalarda titanyum ve özellikleri
52. Corrosion of orthodontic appliances-should we care?10.1016/j.ajodo.2007.03.021 ↗
53. Galvanic corrosion between orthodontic wires and brackets in fluoride mouthwashes10.1093/ejo/cji102 ↗
54. Surface characterizations and corrosion resistance of nickel-titanium orthodontic archwires in artificial saliva of various degrees of acidity10.1002/jbm.a.30340 ↗
55. Corrosion resistance of different nickel-titanium archwires in acidic fluoride-containing artificial saliva10.2319/042909-235.1 ↗
56. Influence of fluoride and chloride on corrosion behavior of NiTi orthodontic wires10.1016/j.actbio.2007.02.002 ↗
57. Variations in surface characteristics and corrosion behaviour of metal brackets and wires in different electrolyte solutions10.1093/ejo/cjp146 ↗
58. In vitro corrosion behavior of lingual orthodontic archwires