journal article·2022-12-09Open access

Adhesive Property of 3D-Printed PEEK Abutments: Effects of Surface Treatment and Temporary Crown Material on Shear Bond Strength

Dingjie Wang, Xingting Han, Feng Luo, Florian M. Thieringer, Yichen Xu, Guomin Ou, Sebastian Spintzyk

Abstract

Three-dimensionally printed polyetheretherketone (PEEK) materials are promising for fabricating customized dental abutments. This study aimed to investigate the adhesive property of a 3D-printed PEEK material. The effects of surface treatment and temporary crown materials on shear bond strength were evaluated. A total of 108 PEEK discs were 3D printed by fused-filament fabrication. Surface treatments, including sandblasting, abrasive paper grinding, and CO2 laser ablation, were applied to the PEEK discs, with the untreated specimens set as the control. Afterward, the surface topographies of each group were investigated by scanning electron microscopy (SEM, n = 1) and roughness measurements (n = 7). After preparing the bonding specimens with three temporary crown materials (Artificial teeth resin (ATR), 3M™ Filtek™ Supreme Flowable Restorative (FR), and Cool Temp NATURAL (CTN)), the shear bond strength was measured (n = 6), and the failure modes were analyzed by microscopy and SEM. The results showed that ATR exhibited a significantly higher shear bond strength compared to FR and CTN (p < 0.01), and the PEEK surfaces treated by sandblasting and abrasive paper grinding showed a statistically higher shear bond strength compared to the control (p < 0.05). For clinical application, the ATR material and subtractive surface treatments are recommended for 3D-printed PEEK abutments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Endodontics and Root Canal Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, Department of Oral Implantology, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China

Department of Prosthodontics, Peking University School and Hospital of Stomatology, National Center of Stomatology, National Clinical Research Center for Oral Diseases, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing Key Laboratory of Digital Stomatology, NHC Key Laboratory of Digital Technology of Stomatology, 22 Zhongguancun Avenue South, Beijing 100081, China

State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, Department of Oral Prosthodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China

Medical Additive Manufacturing Research Group, Hightech Research Center, Department of Biomedical Engineering, University of Basel, 4123 Allschwil, Switzerland

Department of Oral and Cranio-Maxillofacial Surgery, University Hospital Basel, 4031 Basel, Switzerland

ADMiRE Research Center—Additive Manufacturing, Intelligent Robotics, Sensors and Engineering, School of Engineering and IT, Carinthia University of Applied Sciences, 9524 Villach, Austria

Funding

Sichuan Science and Technology Program · Research and Development Program of West China Hospital of Stomatology Sichuan University · West China School/Hospital of Stomatology Sichuan University · National Natural Science Foundation of China · China Postdoctoral Science Foundation

References (38)

Show source-provided references
1. Immediate Single-Tooth Implants in the Anterior Maxilla: 3-Year Results of a Case Series on Hard and Soft Tissue Response and Aesthetics: Immediate Single-Tooth Implants10.1111/j.1600-051X.2011.01748.x ↗
2. Treatment Outcome of Immediate, Early and Conventional Single-Tooth Implants in the Aesthetic Zone: A Systematic Review to Survival, Bone Level, Soft-Tissue, Aesthetics and Patient Satisfaction10.1111/j.1600-051X.2008.01330.x ↗
3. Provisional Restorations in Soft Tissue Management around Dental Implants: Chee10.1034/j.1600-0757.2001.027001139.x ↗
4. Abutment Selection, Designing, and Its Influence on the Emergence Profile: A Comprehensive Review10.4103/2347-4610.116586 ↗
5. Vital Guide to Dental Implants10.1038/vital890 ↗
6. Patient Satisfaction and Esthetic Outcome after Immediate Placement and Provisionalization of Single-Tooth Implants Involving a Definitive Individual Abutment10.1111/clr.12260 ↗
7. Xu, Y., Huang, H., Wu, M., Tian, Y., Wan, Q., Shi, B., Hu, T., and Spintzyk, S. (2022). Rapid Additive Manufacturing of a Superlight Obturator for Large Oronasal Fistula in Pediatric Patient. Laryngoscope, lary.30352.10.1002/lary.30352 ↗
8. Repairability of a 3D Printed Denture Base Polymer: Effects of Surface Treatment and Artificial Aging on the Shear Bond Strength10.1016/j.jmbbm.2020.104227 ↗
9. In-Vitro Performance of CAD/CAM-Fabricated Implant-Supported Temporary Crowns10.1007/s00784-017-2057-7 ↗
10. Comparison of Interim Restorations Fabricated by CAD/CAM with Those Fabricated Manually10.1016/j.prosdent.2015.03.007 ↗
11. Xu, Y., Unkovskiy, A., Klaue, F., Rupp, F., Geis-Gerstorfer, J., and Spintzyk, S. (2018). Compatibility of a Silicone Impression/Adhesive System to FDM-Printed Tray Materials—A Laboratory Peel-off Study. Materials, 11.10.3390/ma11101905 ↗
12. The Future of Dental Devices Is Digital10.1016/j.dental.2011.10.014 ↗
13. PEEK Biomaterials in Trauma, Orthopedic, and Spinal Implants10.1016/j.biomaterials.2007.07.013 ↗
14. PEEK Polymer’s Properties and Its Use in Prosthodontics. A Review
15. Polyetheretherketone--Cytotoxicity and Mutagenicity in Vitro10.1016/S0142-9612(01)00300-3 ↗
16. Adhesion of PEEK to Resin-Matrix Composites Used in Dentistry: A Short Review on Surface Modification and Bond Strength
17. The Effect of Different Surface Treatments on the Bond Strength of PEEK Composite Materials10.1016/j.dental.2014.03.011 ↗
18. PEEK Surface Treatment Effects on Tensile Bond Strength to Veneering Resins10.1016/j.prosdent.2014.05.014 ↗
19. Adhesion to High-Performance Polymers Applied in Dentistry: A Systematic Review10.1016/j.dental.2020.01.002 ↗
20. Tailoring the Biologic Responses of 3D Printed PEEK Medical Implants by Plasma Functionalization10.1016/j.dental.2022.04.026 ↗
21. Spintzyk, S., Yamaguchi, K., Sawada, T., Schille, C., Schweizer, E., Ozeki, M., and Geis-Gerstorfer, J. (2016). Influence of the Conditioning Method for Pre-Sintered Zirconia on the Shear Bond Strength of Bilayered Porcelain/Zirconia. Materials, 9.10.3390/ma9090765 ↗
22. Wang, Z., Runzi, M., Gilchrist, M., and Gong, H. (2021). Mechanical Properties of High-Performance Plastic Polyether-Ether-Ketone (PEEK) Printed by Fused Deposition Modeling, University of Texas at Austin.
23. Biodegradable Zn-Cu-Fe Alloy as a Promising Material for Craniomaxillofacial Implants: An in Vitro Investigation into Degradation Behavior, Cytotoxicity, and Hemocompatibility10.3389/fchem.2022.860040 ↗
24. Chen, J., Yang, R., Shi, B., Xu, Y., and Huang, H. (2022). Obturator Manufacturing for Oronasal Fistula after Cleft Palate Repair: A Review from Handicraft to the Application of Digital Techniques. JFB, 13.10.3390/jfb13040251 ↗
25. 3D Printing with Polymers: Challenges among Expanding Options and Opportunities10.1016/j.dental.2015.09.018 ↗
26. Decision Basis for Multi-Directional Path Planning for Post-Processing Reduction in Material Extrusion10.1007/s11740-021-01018-6 ↗
27. Witteman, W.J. (2013). The CO2 Laser, Springer. Softcover Reprint of the Original 1st ed. 1987.10.1007/978-3-540-47744-0 ↗
28. The Role of the CO2 Laser and Fractional CO2 Laser in Dermatology10.5978/islsm.14-RE-01 ↗
29. Polymerization Shrinkage by Investigation of Uv Curable Dental Restorative Composites Containing Multifunctional Methacrylates10.2478/pjct-2013-0027 ↗
30. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
31. Effect of Various Treatment Modalities on Surface Characteristics and Shear Bond Strengths of Polyetheretherketone-Based Core Materials10.1111/jopr.12702 ↗
32. Plasma and Short Pulse Laser Treatment of Medical Grade PEEK Surfaces for Controlled Wetting10.1016/j.matlet.2013.07.030 ↗
33. In Vitro Study of Surface Alterations to Polyetheretherketone and Titanium and Their Effect upon Human Gingival Fibroblasts10.1016/j.prosdent.2019.12.012 ↗
34. Laser Surface Modification of PEEK10.1016/j.apsusc.2012.01.154 ↗
35. Improving Adhesion of Powder Coating on PEEK Composite: Influence of Atmospheric Plasma Parameters10.1016/j.apsusc.2015.09.148 ↗
36. Kuscu, E., Klink, A., Spintzyk, S., Kraemer Fernandez, P., and Huettig, F. (2021). Bonding Interface and Repairability of 3D-Printed Intraoral Splints: Shear Bond Strength to Current Polymers, with and without Ageing. Materials, 14.10.3390/ma14143935 ↗
37. Tensile Bond Strength of Veneering Resins to PEEK: Impact of Different Adhesives10.4012/dmj.2013-011 ↗
38. Variables Related to Materials and Preparing for Bond Strength Testing Irrespective of the Test Protocol10.1016/j.dental.2009.11.154 ↗