journal article·2024-10-21Open access

Mechanical and Corrosion Behaviour in Simulated Body Fluid of As-Fabricated 3D Porous L-PBF 316L Stainless Steel Structures for Biomedical Implants

Pedro Nogueira, João Magrinho, Luis Reis, Augusto Moita de Deus, Maria Beatriz Silva, Pedro Lopes, Luís Oliveira, António Castela, Ricardo Cláudio, Jorge L. Alves, Maria Fátima Vaz, Maria Carmezim, Catarina Santos

Journal of Functional Biomaterials· Volume 15· Issue 10

Abstract

Laser powder bed fusion (L-PBF) is one of the most promising additive manufacturing technologies for creating customised 316L Stainless Steel (SS) implants with biomimetic characteristics, controlled porosity, and optimal structural and functional properties. However, the behaviour of as-fabricated 3D 316L SS structures without any surface finishing in environments that simulate body fluids remains largely unknown. To address this knowledge gap, the present study investigates the surface characteristics, the internal porosity, the corrosion in simulated body fluid (SBF), and the mechanical properties of as-fabricated 316L SS structures manufactured by L-PBF with rhombitruncated cuboctahedron (RTCO) unit cells with two distinct relative densities (10 and 35%). The microstructural analysis confirmed that the RTCO structure has a pure austenitic phase with a roughness of ~20 µm and a fine cellular morphology. The micro-CT revealed the presence of keyholes and a lack of fusion pores in both RTCO structures. Despite the difference in the internal porosity, the mechanical properties of both structures remain within the range of bone tissue and in line with the Gibson and Ashby model. Additionally, the as-fabricated RTCO structures demonstrated passive corrosion behaviour in the SBF solution. Thus, as-fabricated porous structures are promising biomaterials for implants due to their suitable surface roughness, mechanical properties, and corrosion resistance, facilitating bone tissue growth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

IDMEC—Institute of Mechanical Engineering, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal

CeFEMA—Center of Physics and Engineering of Advanced Materials, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal

INEGI, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal

Instituto Politécnico de Setúbal, EST Setúbal, Campus IPS, 2910-761 Setúbal, Portugal

CQE, IMS, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal

Funding

national funds (FCT/MCTES, Fundação para a Ciência e Tecnologia and Ministério da Ciência, Tecnologia e Ensino Superior, Portugal) · Institute of Molecular Sciences (IMS) project · LAETA Base Funding · LAETA Programatic Funding

References (58)

Show source-provided references
1. Tribological behavior and biocompatibility of novel Nickel-Free stainless steel manufactured via laser powder bed fusion for biomedical applications10.1016/j.matdes.2024.113013 ↗
2. Status of nickel free stainless steel in biomedical field: A review of last 10 years and what else can be done10.1016/j.matpr.2019.12.205 ↗
3. Development of Biomedical Implants through Additive Manufacturing: A Review10.1007/s11665-021-05578-7 ↗
4. Salama, M., Vaz, M.F., Colaço, R., Santos, C., and Carmezim, M. (2022). Biodegradable Iron and Porous Iron: Mechanical Properties, Degradation Behaviour, Manufacturing Routes and Biomedical Applications. J. Funct. Biomater., 13.10.3390/jfb13020072 ↗
5. Elastic modulus of trabecular bone material10.1016/0021-9290(88)90167-4 ↗
6. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review
7. Highly porous, low elastic modulus 316L stainless steel scaffold prepared by selective laser melting10.1016/j.msec.2016.07.027 ↗
8. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
9. Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: Effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure10.1016/j.matdes.2022.110874 ↗
10. An investigation of the corrosion behavior of 316L stainless steel fabricated by SLM and SPS techniques10.1016/j.matchar.2020.110204 ↗
11. Effects of crystallographic orientation on the corrosion behavior of stainless steel 316L manufactured by laser powder bed fusion10.1016/j.corsci.2021.110009 ↗
12. Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting10.1016/j.matdes.2018.04.058 ↗
13. Current trends in additive manufacturing of selective laser melting for biomedical implant applications10.1016/j.jmrt.2024.06.041 ↗
14. (2011). Mechanical Testing of Metals—Ductility Testing—Compression Test for Porous and Cellular Metals (Standard No. ISO 3314:2011).
15. (2024, July 06). Ge. Additive. Available online: https://www.carpenteradditive.com/datasheet-powderrange-316l.
16. Machine learning augmented X-ray computed tomography features for volumetric defect classification in laser beam powder bed fusion10.1007/s00170-023-11281-9 ↗
17. Non-destructive characterization of process-induced defects and their effect on the fatigue behavior of austenitic steel 316L made by laser-powder bed fusion10.1007/s40964-019-00105-6 ↗
18. Additively manufactured biodegradable porous iron10.1016/j.actbio.2018.07.011 ↗
19. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
20. Frictional characteristics of Teflon–steel interfaces under dynamic conditions10.1002/eqe.4290150607 ↗
21. Nogueira, P., Lopes, P., Oliveira, L., Alves, J.L., Magrinho, J.P.G., Deus, A.M.d., Vaz, M.F., and Silva, M.B. (2024). Evaluation of Lattice Structures for Medical Implants: A Study on the Mechanical Properties of Various Unit Cell Types. Metals, 14.10.3390/met14070780 ↗
22. Evolution of 316L stainless steel feedstock due to laser powder bed fusion process
23. Corrosion behavior and biocompatibility of additively manufactured 316L stainless steel in a physiological environment: The effect of citrate ions
24. Combined effect of process variables on the plastic behaviour of 316L stainless steel printed by L-PBF10.1111/str.12438 ↗
25. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel10.1016/j.jmatprotec.2017.05.042 ↗
26. Yadroitsev, I., Yadroitsava, I., du Plessis, A., and MacDonald, E. (2021). 9—Residual stress in laser powder bed fusion. Fundamentals of Laser Powder Bed Fusion of Metals, Elsevier.10.1016/B978-0-12-824090-8.00024-X ↗
27. Dimensional accuracy and stability analysis of laser powder bed fusion (LPBF) samples: Implications of process variables10.1007/s12008-023-01680-3 ↗
28. Rupal, B.S., Singh, T., Wolfe, T., Secanell, M., and Qureshi, A.J. (2021). Tri-Planar Geometric Dimensioning and Tolerancing Characteristics of SS 316L Laser Powder Bed Fusion Process Test Artifacts and Effect of Base Plate Removal. Materials, 14.10.3390/ma14133575 ↗
29. Effect of build geometry on the microstructural development of 316L parts produced by additive manufacturing10.1016/j.matchar.2018.04.040 ↗
30. Surface texture measurement for additive manufacturing10.1088/2051-672X/3/2/024002 ↗
31. Defects and anomalies in powder bed fusion metal additive manufacturing10.1016/j.cossms.2021.100974 ↗
32. The role of substrate preheating on the microstructure, roughness, and mechanical performance of AISI 316L produced by directed energy deposition additive manufacturing10.1007/s00170-021-08564-4 ↗
33. Regulation of dimensional errors and surface quality of thin-walled components fabricated by blue laser directed energy deposition10.1016/j.optlaseng.2023.107922 ↗
34. In situ X-ray quantification of melt pool behaviour during directed energy deposition additive manufacturing of stainless steel10.1016/j.matlet.2020.129205 ↗
35. Corrosion performance of additively manufactured stainless steel parts: A review
36. Alteration of stainless-steel surface potential by modifying topography inhibits the development of bacterial biofilm10.1557/s43578-024-01308-6 ↗
37. The influence of nanostructured features on bacterial adhesion and bone cell functions on severely shot peened 316L stainless steel10.1016/j.biomaterials.2015.09.019 ↗
38. Feature-based volumetric defect classification in metal additive manufacturing10.1038/s41467-022-34122-x ↗
39. X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
40. Defects quantification of additively manufactured AISI 316L stainless steel parts via non-destructive analyses: Experiments and semi-FEM-analytical-based modeling10.1016/j.optlastec.2024.110684 ↗
41. Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel10.1016/j.matdes.2018.12.006 ↗
42. Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: A correlation between in situ pyrometry and ex situ X-ray radiography
43. Yusuf, S.M., Chen, Y., Boardman, R., Yang, S., and Gao, N. (2017). Investigation on Porosity and Microhardness of 316L Stainless Steel Fabricated by Selective Laser Melting. Metals, 7.10.3390/met7020064 ↗
44. Increasing the Productivity of Laser Powder Bed Fusion for Stainless Steel 316L through Increased Layer Thickness10.1007/s11665-020-05334-3 ↗
45. Mechanical properties and microstructural characteristics of 316L stainless steel fabricated by laser powder bed fusion and binder jetting10.1016/j.jmrt.2023.04.069 ↗
46. Production of corrosion-resistant 316L stainless steel clads on carbon steel using powder bed fusion-selective laser melting10.1016/j.jmatprotec.2019.05.024 ↗
47. Selective Laser Melting of 304L and 316L Stainless Steels: A Comparative Study of Microstructures and Mechanical Properties10.1002/srin.202100664 ↗
48. The Influence of Post-Build Microstructure on the Electrochemical Behavior of Additively Manufactured 17-4 PH Stainless Steel10.1007/s11837-016-2237-y ↗
49. A critical review of corrosion characteristics of additively manufactured stainless steels10.1080/09506608.2020.1855381 ↗
50. On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting10.1149/2.0551706jes ↗
51. The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L10.1149/2.0431805jes ↗
52. Gudić, S., Nagode, A., Šimić, K., Vrsalović, L., and Jozić, S. (2022). Corrosion Behavior of Different Types of Stainless Steel in PBS Solution. Sustainability, 14.10.3390/su14148935 ↗
53. Additively manufactured functionally graded biodegradable porous iron10.1016/j.actbio.2019.07.013 ↗
54. Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗
55. Mechanical properties of additively manufactured metal lattice structures: Data review and design interface
56. The properties of foams and lattices10.1098/rsta.2005.1678 ↗
57. On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting10.1016/j.ijfatigue.2019.03.019 ↗
58. Elastic and failure response of imperfect three-dimensional metallic lattices: The role of geometric defects induced by Selective Laser Melting10.1016/j.jmps.2017.07.003 ↗