journal article·2023-03-29Open access

Study of the Effect of Anodic Oxidation on the Corrosion Properties of the Ti6Al4V Implant Produced from SLM

Ada Orłowska, Janusz Szewczenko, Wojciech Kajzer, Karolina Goldsztajn, Marcin Basiaga

Abstract

Additive technologies allowed for the development of medicine and implantology, enabling the production of personalized and highly porous implants. Although implants of this type are used clinically, they are usually only heat treated. Surface modification using electrochemical methods can significantly improve the biocompatibility of biomaterials used for implants, including printed ones. The study examined the effect of anodizing oxidation on the biocompatibility of a porous implant made of Ti6Al4V by the SLM method. The study used a proprietary spinal implant intended for the treatment of discopathy in the c4–c5 section. As part of the work, the manufactured implant was assessed in terms of compliance with the requirements for implants (structure testing—metallography) and the accuracy of the pores produced (pore size and porosity). The samples were subjected to surface modification using anodic oxidation. The research was carried out for 6 weeks in in vitro conditions. Surface topographies and corrosion properties (corrosion potential, ion release) were compared for unmodified and anodically oxidized samples. The tests showed no effect of anodic oxidation on the surface topography and improved corrosion properties. Anodic oxidation stabilized the corrosion potential and limited the release of ions to the environment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland

References (43)

Show source-provided references
1. Peters, M., Hemptenmacher, J., Kumpfert, J., and Leyens, C. (2003). Structure and properties of titanium and titanium alloys. Titan. Titan. Alloy. Fundam. Appl., 1–36.10.1002/3527602119.ch1 ↗
2. Niinomi, M., Narushima, T., and Nakai, M. (2015). Advances in Metallic Biomaterials, Springer.10.1007/978-3-662-46842-5 ↗
3. Tang, H., Zhao, P., Xiang, C., Liu, N., and Jia, L. (2018). Titanium in Medical and Dental Applications, Woodhead Publishing.
4. Biomaterial surface modification of titanium and titanium alloys for medical applications
5. Recent advances in manufacturing and surface modification of titanium orthopaedic applications10.1016/j.proeng.2017.01.259 ↗
6. Anodic oxidation of titanium: From technical aspects to biomedical applications
7. Surface modification of Ti6Al4V titanium alloy for biomedical applications and its effect on tribological performance-a review
8. Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects10.1002/jor.22293 ↗
9. Designing a novel dental root analogue implant using cone beam computed tomography and CAD/CAM technology10.1111/j.1600-0501.2011.02359.x ↗
10. Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology10.1016/j.prosdent.2014.04.026 ↗
11. Current concepts in scaffolding for bone tissue engineering
12. Yadroitsava, I., Du Plessis, A., and Yadroitsev, I. (2019). Bone regeneration on implants of titanium alloys produced by laser powder bed fusion: A review. Titan. Consum. Appl., 197–233.10.1016/B978-0-12-815820-3.00016-2 ↗
13. Bony ingrowth potential of 3D-printed porous titanium alloy: A direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model10.1016/j.spinee.2018.02.018 ↗
14. In vitro and in vivo study of additive manufactured porous Ti6Al4V scaffolds for repairing bone defects10.1038/srep34072 ↗
15. Interplay between cellular activity and three-dimensional scaffold-cell constructs with different foam structure processed by electron beam melting10.1002/jbm.a.35307 ↗
16. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment10.1016/j.msec.2015.10.069 ↗
17. Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth10.1016/j.msec.2019.110289 ↗
18. Fabrication of porous-Ti6Al4V alloy by using hot pressing technique and Mg space holder for hard-tissue biomedical applications10.1007/s10856-021-06546-2 ↗
19. 3D-printed porous Ti6Al4V scaffolds for long bone repair in animal models: A systematic review10.1186/s13018-022-02960-6 ↗
20. Hydromechanical mechanism behind the effect of pore size of porous titanium scaffolds on osteoblast response and bone ingrowth10.1016/j.matdes.2019.108151 ↗
21. The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: Case report10.3171/2016.9.SPINE16371 ↗
22. Reconstruction of thoracic spine using a personalized 3D-printed vertebral body in adolescent with T9 primary bone tumor10.1016/j.wneu.2017.05.133 ↗
23. Combining micro computed tomography and three-dimensional registration to evaluate local strains in shape memory scaffolds10.1016/j.actbio.2013.11.007 ↗
24. Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments10.1016/j.actbio.2010.09.034 ↗
25. Operative management of lumbar degenerative disc disease10.4184/asj.2016.10.4.801 ↗
26. Leczenie zespołów bólowych kręgosłupa w przebiegu dyskopatii
27. Guidelines for the performance of fusion procedures for degenerative disease of the lumbar spine. Part 8: Lumbar fusion for disc herniation and radiculopathy10.3171/spi.2005.2.6.0673 ↗
28. Protezy dysków jako nowa alternatywa leczenia wybranej grupy chorych z dyskopatią szyjną i lędźwiową
29. Risk factors for cage migration and cage retropulsion following transforaminal lumbar interbody fusion10.1016/j.spinee.2018.08.007 ↗
30. Complications in the surgical treatment of the spinal column
31. One-step reconstruction with a 3D-printed, custom-made prosthesis after total en bloc sacrectomy: A technical note10.1007/s00586-016-4871-z ↗
32. Micro-/nano-engineered cellular responses for soft tissue engineering and biomedical applications10.1002/smll.201100046 ↗
33. Effects of titanium surface topography on bone integration: A systematic review10.1111/j.1600-0501.2009.01775.x ↗
34. Mechanisms regulating increased production of osteoprotegerin by osteoblasts cultured on microstructured titanium surfaces10.1016/j.biomaterials.2009.03.047 ↗
35. Influence of initial surface treatment on corrosion resistance of Ti6Al4V ELI alloy after anodizing
36. Surface modification of implants for bone surgery10.1515/amm-2015-0357 ↗
37. Tailored surface treatment of 3D printed porous Ti6Al4V by microarc oxidation for enhanced osseointegration via optimized bone in-growth patterns and interlocked bone/implant interface10.1021/acsami.6b05893 ↗
38. Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review10.1016/j.jmbbm.2020.103671 ↗
39. Corrosion behaviour and cell interaction of Ti-6Al-4V alloy prepared by two techniques of 3D printing10.1016/j.msec.2018.08.066 ↗
40. Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications10.1016/j.jmbbm.2008.05.004 ↗
41. Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes10.1016/j.jmbbm.2018.04.010 ↗
42. Relative influence of surface topography and surface chemistry on cell response to bone implant materials. Part 2: Biological aspects10.1243/09544119JEIM901 ↗
43. Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants10.1016/j.biotechadv.2011.06.004 ↗