journal article·2021-08-14Open access

Improvement of Mechanical Strength of Tissue Engineering Scaffold Due to the Temperature Control of Polymer Blend Solution

Azizah Intan Pangesty, Mitsugu Todo

Abstract

Polymeric scaffolds made of PCL/PLCL (ratio 1:3, respectively) blends have been developed by using the Thermally Induced Phase Separation (TIPS) process. A new additional technique has been introduced in this study by applying pre-heat treatment to the blend solution before the TIPS process. The main objective of this study is to evaluate the influence of the pre-heat treatment on mechanical properties. The mechanical evaluation showed that the mechanical strength of the scaffolds (including tensile strength, elastic modulus, and strain) improved as the temperature of the polymer blend solution increased. The effects on the microstructure features were also observed, such as increasing strut size and differences in phase separation morphology. Those microstructure changes due to temperature control contributed to the increasing of mechanical strength. The in vitro cell study showed that the PCL/PLCL blend scaffold exhibited better cytocompatibility than the neat PCL scaffold, indicated by a higher proliferation at 4 and 7 days in culture. This study highlighted that the improvement of the mechanical strength of polymer blends scaffolds can be achieved using a very versatile way by controlling the temperature of the polymer blend solution before the TIPS process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Material Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia

Research Institute for Applied Mechanics, Kyushu University, Kasuga, Fukuoka 816-8580, Japan

Funding

Universitas Indonesia

References (29)

Show source-provided references
1. The Use of Natural Polymers in Tissue Engineering: A Focus on Electrospun Extracellular Matrix Analogues10.3390/polym2040522 ↗
2. Fibrin-Based Tissue-Engineered Blood Vessels: Differential Effects of Biomaterial and Culture Parameters on Mechanical Strength and Vascular Reactivity10.1089/ten.2005.11.991 ↗
3. Engineering of fibrin-based functional and implantable small-diameter blood vessels10.1152/ajpheart.00479.2004 ↗
4. Collagen and elastin scaffold by electrospinning for skin tissue engineering applications10.1557/jmr.2019.233 ↗
5. Natural collagen bioscaffolds for skin tissue engineering strategies in burns: A critical review10.1080/00914037.2020.1740991 ↗
6. Collagen-based cell migration models in vitro and in vivo10.1016/j.semcdb.2009.08.005 ↗
7. Collagen-based biomaterials as 3D scaffold for cell cultures: Applications for tissue engineering and gene therapy10.1007/BF02344779 ↗
8. Toledano, M., Asady, S., Toledano-Osorio, M., García-Godoy, F., Serrera-Figallo, M.-A., Benítez-García, J.A., and Osorio, R. (2020). Differential Biodegradation Kinetics of Collagen Membranes for Bone Regeneration. Polymers, 12.10.3390/polym12061290 ↗
9. Degradation pattern of a porcine collagen membrane in an in vivo model of guided bone regeneration10.1111/jre.12530 ↗
10. Dong, C., and Lv, Y. (2016). Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives. Polymers, 8.10.3390/polym8020042 ↗
11. Przybysz, M., Hejna, A., Haponiuk, J., and Formela, K. (2019). Structural and Thermo-Mechanical Properties of Poly(ε-caprolactone) Modified by Various Peroxide Initiators. Polymers, 11.10.3390/polym11071101 ↗
12. Mechanical properties of carbon black/poly (ε-caprolactone)-based tissue scaffolds
13. Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: Structural characteristics, mechanical properties and cell adhesion potential10.1016/j.biomaterials.2004.10.007 ↗
14. PCL-PGLA Composite Tubular Scaffold Preparation and Biocompatibility Investigation10.1177/039139880602900809 ↗
15. 3D bioprinting of urethra with PCL/PLCL blend and dual autologous cells in fibrin hydrogel: An in vitro evaluation of biomimetic mechanical property and cell growth environment10.1016/j.actbio.2016.12.008 ↗
16. Polyurethane-Polycaprolactone Blend Patches: Scaffold Characterization and Cardiomyoblast Adhesion, Proliferation, and Function10.1021/acsbiomaterials.8b00848 ↗
17. Biodegradable polyesters for medical and ecological applications, Macromol10.1002/(SICI)1521-3927(20000201)21:3<117::AID-MARC117>3.0.CO;2-X ↗
18. Preparation and Characterization of porous tubular scaffold made of PCL/PLCL blends for vascular tissue engineering
19. Compressive mechanical properties and deformation behavior of porous polymer blends of poly(ε-caprolactone) and poly(l-lactic acid)10.1007/s10853-011-5766-3 ↗
20. Improvement of impact fracture properties of PLA/PCL polymer blend due to LTI addition10.1007/s10853-006-0137-1 ↗
21. Control of structure, morphology and property in electrospun poly(glycolide-co-lactide) non-woven membranes via post-draw treatments10.1016/S0032-3861(03)00464-6 ↗
22. Pangesty, A.I., Arahira, T., and Todo, M. (2016). Characterization of Tensile Mechanical Behavior of MSCs/PLCL Hybrid Layered Sheet. J. Funct. Biomater., 7.10.3390/jfb7020014 ↗
23. (2021, April 01). Examples of Image Analysis Using ImageJ, Area, Available online: https://imagej.nih.gov/ij/docs/pdfs/examples.pdf.
24. Conoscenti, G., La Carrubba, V., and Brucato, V. (2017). A Versatile Technique to Produce Porous Polymeric Scaffolds: The Thermally Induced Phase Separation (TIPS) Method. Arch. Chem. Res., 1.10.21767/2572-4657.100012 ↗
25. Effect of Reaction Conditions on Pore Configuration and Mechanical Property for Porous Hydroxyapatite Prepared by Polymer Sponge Method10.4028/www.scientific.net/KEM.336-338.1567 ↗
26. Loadable TiO2 scaffolds—A correlation study between processing parameters, micro CT analysis and mechanical strength10.1016/j.jeurceramsoc.2009.03.017 ↗
27. Effect of porous structure and pore size on mechanical strength of 3D-printed comby scaffolds10.1016/j.matlet.2018.03.205 ↗
28. Singh, M., Singh, R., and Dhami, M.K. (2020). Biocompatible Thermoplastics as Implants/Scaffold. Ref. Modul. Mater. Sci. Mater. Eng.
29. Jeznach, O., Kolbuk, D., and Sajkiewicz, P. (2019). Aminolysis of various aliphatic polyesters in a form of nanofibers and films. Polymers, 11.10.3390/polym11101669 ↗