journal article·2023-07-27Open access

Biodegradable Magnesium Alloys for Personalised Temporary Implants

Radu Emil Hendea, Doina Raducanu, Adrián Claver, José Antonio García, Vasile Danut Cojocaru, Anna Nocivin, Doina Stanciu, Nicolae Serban, Steliana Ivanescu, Corneliu Trisca-Rusu, Radu Septimiu Campian

Abstract

The objective of this experimental work was to examine and characterise the route for obtaining demonstrative temporary biodegradable personalised implants from the Mg alloy Mg-10Zn-0.5Zr-0.8Ca (wt.%). This studied Mg alloy was obtained in its powder state using the mechanical alloying method, with shape and size characteristics suitable for ensuing 3D additive manufacturing using the SLM (selective laser melting) procedure. The SLM procedure was applied to various processing parameters. All obtained samples were characterised microstructurally (using XRD—X-ray diffraction, and SEM—scanning electron microscopy); mechanically, by applying a compression test; and, finally, from a corrosion resistance viewpoint. Using the optimal test processing parameters, a few demonstrative temporary implants of small dimensions were made via the SLM method. Our conclusion is that mechanical alloying combined with SLM processing has good potential to manage 3D additive manufacturing for personalised temporary biodegradable implants of magnesium alloys. The compression tests show results closer to those of human bones compared to other potential metallic alloys. The applied corrosion test shows result comparable with that of the commercial magnesium alloy ZK60.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Oral Rehabilitation, Faculty of Dental Medicine, Iuliu Hatieganu University of Medicine and Pharmacy, 400349 Cluj-Napoca, Romania

Department of Metallic Materials Processing and Ecometallurgy, University Politehnica of Bucharest, 060042 Bucharest, Romania

Institute for Advanced Materials and Mathematics (INAMAT2), Universidad Pública de Navarra (UPNA), 31006 Pamplona, Spain

Faculty of Mechanical, Industrial and Maritime Engineering, OVIDIUS University of Constanta, 900527 Constanța, Romania

Zircon Dent SRL, 400690 Cluj-Napoca, Romania

National Institute for Research and Development in Micro-Technologies, 077190 Bucharest, Romania

Funding

Romanian National Authority for Scientific Research, CCCDI–UEFISCDI · Gobierno de Navarra—Departamento de Desarrollo Económico

References (70)

Show source-provided references
1. Chakraborty Banerjee, P., Al-Saadi, S., Choudhary, L., Harandi, S.E., and Singh, R. (2019). Magnesium Implants: Prospects and Challenges. Materials, 12.10.3390/ma12010136 ↗
2. Mg bone implant: Features, developments and perspectives10.1016/j.matdes.2019.108259 ↗
3. Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review10.1155/2018/9216314 ↗
4. Paiva, J.C.C., Oliveira, L., Vaz, M.F., and Costa-de-Oliveira, S. (2022). Biodegradable Bone Implants as a New Hope to Reduce Device-Associated Infections—A Systematic Review. Bioengineering, 9.10.3390/bioengineering9080409 ↗
5. (2023, April 06). Orthopedic Implants Market Size, Share, Trends Analysis Report by Product (Hip Implants, Knee Implants, Spinal Implants, Craniomaxillofacial Implants), by Region, and Segment Forecasts 2023–2030, Report ID: GVR-1-68038-020-0. Available online: https://www.grandviewresearch.com/industry-analysis/orthopedic-implants-market.
6. Rare-earth- and aluminum-free, high strength dilute magnesium alloy for Biomedical Applications10.1038/s41598-020-72374-z ↗
7. Manic, M., Vitković, N., and Mitic, J. (2022). Personalized Orthopedics, Springer.
8. 3D printing of personalized artificial bone scaffolds10.1089/3dp.2015.0001 ↗
9. Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective10.1016/j.biomaterials.2016.10.017 ↗
10. Additively manufactured biodegradable porous magnesium10.1016/j.actbio.2017.12.008 ↗
11. Additive manufacturing of biodegradable metals: Current research status and future perspectives10.1016/j.actbio.2019.04.046 ↗
12. Magnesium based alloys and composites: Revolutionized biodegradable temporary implants and strategies to enhance their performance10.1016/j.mtla.2023.101680 ↗
13. (2023, April 08). Global Personalized 3D Printed Orthopedic Implants Market, Data Bridge Market Research. Available online: https://www.databridgemarketresearch.com/reports/global-personalized-3d-printed-orthopedic-implants-market.
14. Design of magnesium alloys with controllable degradation for biomedical implants: From bulk to surface10.1016/j.actbio.2016.09.005 ↗
15. Application of Biodegradable Materials in Orthopedics10.1007/s40846-019-00469-8 ↗
16. Zhi, P., Liu, L., Chang, J., Liu, C., Zhang, Q., Zhou, J., Liu, Z., and Fan, Y. (2022). Advances in the Study of Magnesium Alloys and Their Use in Bone Implant Material. Metals, 12.10.3390/met12091500 ↗
17. Review article Macrophages and bone inflammation
18. Principles of fracture remodeling in children10.1016/j.injury.2004.12.007 ↗
20. Stress shielding at the bone-implant interface: Influence of surface roughness and of the bone-implant contact ratio10.1002/jor.24840 ↗
21. Morcos, P.M. (2018). Nanostructured Mg-ZK50 Sheets Fabricated for Potential Use for Biomedical Applications. [Master’s Thesis, American University in Cairo]. Available online: https://fount.aucegypt.edu/etds/1356.
22. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review10.1016/j.biomaterials.2016.01.012 ↗
23. Review of magnesium-based biomaterials and their applications10.1016/j.jma.2018.02.003 ↗
24. Seetharaman, S., Sankaranarayanan, D., and Gupta, M. (2023). Magnesium-Based Temporary Implants: Potential, Current Status, Applications, and Challenges. J. Funct. Biomater., 14.10.3390/jfb14060324 ↗
25. Microstructure development and biodegradation behavior of additively manufactured Mg-Zn-Gd alloy with LPSO structure10.1016/j.jmst.2022.09.059 ↗
26. In vitro degradation behavior of Mg scaffolds with three-dimensional interconnected porous structures for bone tissue engineering10.1016/j.corsci.2018.09.001 ↗
27. In vitro degradation behavior and cytocompatibility of Mg–Zn–Zr alloys10.1007/s10856-010-4111-8 ↗
28. In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal10.1016/j.actbio.2012.02.018 ↗
29. Development of magnesium implants by application of conjoint-based quality function deployment10.1002/jbm.a.36784 ↗
30. Ag-Introduced Antibacterial Ability and Corrosion Resistance for Bio-Mg Alloys10.1155/2018/6023460 ↗
31. Zinc and its importance for human health: An integrative review
32. Biodegradable Magnesium-Based Implants in Orthopedics—A General Review and Perspectives10.1002/advs.201902443 ↗
33. Positive feedback effects of Mg on the hydrolysis of poly-l-lactic acid (PLLA)10.1016/j.polymertesting.2018.03.042 ↗
34. The potential of isotopically enriched magnesium to study bone implant degradation in vivo10.1016/j.actbio.2017.01.054 ↗
35. Tailoring Biodegradation of Mg-Ca Alloy by Acid Pickling and Polydioxanone/n-Hydroxyapatite Composite Coating for Temporary Implant Applications10.1007/s11665-022-06972-5 ↗
36. Challenges and opportunities for biodegradable magnesium alloy implants10.1080/10667857.2017.1377973 ↗
37. Nopová, K., Jaroš, J., Cervinek, O., Pantělejev, L., Gneiger, S., Senck, S., and Koutný, D. (2023). Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion. Appl. Sci., 13.10.3390/app13031377 ↗
38. System development, formability quality and microstructure evolution of selective laser-melted magnesium10.1080/17452759.2016.1210522 ↗
39. Treatment of trauma-induced femoral head necrosis with biodegradable pure Mg screw-fixed pedicle iliac bone flap
40. The precision and reliability evaluation of 3-dimensional printed damaged bone and prosthesis models by stereolithography appearance10.1097/MD.0000000000009797 ↗
41. Additive manufacturing of magnesium alloys10.1016/j.bioactmat.2019.12.004 ↗
42. Zang, M., Chen, C., Liu, C., and Wang, S. (2018). Study on Porous Mg-Zn-Zr ZK61 Alloys Produced by Laser Additive Manufacturing. Metals, 8.10.3390/met8080635 ↗
43. Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds10.1016/j.actbio.2019.04.012 ↗
44. 3D printing and its applications in orthopaedic trauma: A technological marvel10.1016/j.jcot.2018.07.022 ↗
45. Hendea, R.E., Raducanu, D., Nocivin, A., Ivanescu, S., Stanciu, D., Trisca-Rusu, C., Campian, R.S., Drob, S.I., Cojocaru, V.D., and Galbinasu, B.M. (2022). Laser Powder Bed Fusion Applied to a New Biodegradable Mg-Zn-Zr-Ca Alloy. Materials, 15.10.3390/ma15072561 ↗
46. Raducanu, D., Cojocaru, V.D., Nocivin, A., Hendea, R., Ivanescu, S., Stanciu, D., Trisca-Rusu, C., Drob, S., and Cojocaru, E.M. (2022). Mechanical Alloying Process Applied for Obtaining a New Biodegradable Mg-xZn-Zr-Ca Alloy. Metals, 12.10.3390/met12010132 ↗
47. Raducanu, D., Cojocaru, V.D., Nocivin, A., Hendea, R.E., Ivanescu, S., Stanciu, D., Trisca-Rusu, C., Serban, N., Drob, S.I., and Campian, R.S. (2022). Microstructure Evolution during Mechanical Alloying of a Biodegradable Magnesium Alloy. Crystals, 12.10.3390/cryst12111641 ↗
48. Eliaz, N. (2019). Corrosion of Metallic Biomaterials: A Review. Materials, 12.10.3390/ma12030407 ↗
49. Studies on Density, Corrosion Rate and Hardness Characteristics of Stainless Steel Implanted by Nitrogen Ion10.1088/1757-899X/515/1/012018 ↗
50. Corrosion Resistance and Biological Properties of Pure Magnesium Modified by PEO in Alkaline Phosphate Solutions10.3390/cmd4020012 ↗
51. Chin, Y., Check, Q., Glowac, A., and Caesarendra, W. (2020). A Review of In-Vivo Real Time CorrosionSystems of Biodegradable Metal Implants. Appl. Sci., 10.10.3390/app10093141 ↗
52. Line Profiles of Neutron Powder-Diffraction Peaks for Structure Refinement10.1107/S0365110X67000234 ↗
53. In situ preparation of a novel Ta2O5/MAO composite coating on magnesium for anti-corrosion protection10.1016/j.surfcoat.2021.128003 ↗
54. Eliaz, N., and Gileadi, E. (2019). Physical Electrochemistry: Fundamentals, Techniques, and Applications, Wiley-VCH. [2nd ed.].
55. Mechanical Alloying: A Novel Technique to Synthesize Advanced Materials10.34133/2019/4219812 ↗
56. Liu, S., and Guo, H. (2020). Balling Behavior of Selective Laser Melting (SLM) Magnesium Alloy. Materials, 13.10.3390/ma13163632 ↗
57. Evaluating cortical bone porosity using Hr-Pqct10.29328/journal.aceo.1001006 ↗
58. Mathematical Modeling for Correlation of the Resistance to Compression with the Parameters Md, Bo and E/A, for the Design of Titanium Beta Alloys Developed for Medical Applications
59. Corrosion resistance and tribological behavior of ZK30 magnesium alloy coated by plasma electrolytic oxidation10.1016/j.surfcoat.2021.126983 ↗
60. Assessing the corrosion of biodegradable magnesium implants: A critical review of current methodologies and their limitations10.1016/j.actbio.2011.11.014 ↗
61. The history of biodegradable magnesium implants: A review10.1016/j.actbio.2010.02.028 ↗
62. Design of the double-layer biocompatible coating on AZ31 magnesium alloy for highly effective corrosion resistance10.1016/j.surfcoat.2021.127897 ↗
63. Alloys created between immiscible metals10.1016/j.pmatsci.2004.07.001 ↗
64. Processing and characterization of mechanically alloyed immiscible metals10.3139/146.110781 ↗
65. Fu, W., Yang, H., Li, T., Sun, J., Guo, S., Fang, D., Qin, W., Ding, X., Gao, Y., and Sun, J. (2022). Enhancing corrosion resistance of ZK60 magnesium alloys via Ca microalloying: The impact of nanoscale precipitates. J. Magnes. Alloys.10.1016/j.jma.2022.06.011 ↗
66. Corrosion behavior of as-cast ZK60 alloy modified with rare earth addition in sodium sulfate medium10.1016/j.corsci.2019.108092 ↗
67. Effect of Micro-alloying and Microstructure on the Corrosion Behavior of As-Cast Mg-6.2 wt.% Zn Alloy10.1007/s11665-020-05133-w ↗
68. Xue, Y., Pang, X., Karparvarfard, S.M.H., Jahed, H., Luo, S., and Shen, Y. (2022). Corrosion Protection of ZK60 Wrought Magnesium Alloys by Micro-Arc Oxidation. Metals, 12.10.3390/met12030449 ↗
69. On the corrosion of ZK60 magnesium alloy after severe plastic deformation10.22226/2410-3535-2017-4-421-427 ↗
70. Fractographic features of technically pure magnesium, AZ31 and ZK60 alloys subjected to stress corrosion cracking10.1016/j.msea.2019.138744 ↗