journal article·2023-03-31Open access

Effect of Mg Contents on the Microstructure, Mechanical Properties and Cytocompatibility of Degradable Zn-0.5Mn-xMg Alloy

Lingbo Yang, Xing Li, Lijing Yang, Xinglong Zhu, Manli Wang, Zhenlun Song, Huinan Hannah Liu, Wensheng Sun, Ruihong Dong, Jiqiang Yue

Abstract

The effect of magnesium (Mg) content on the microstructure, mechanical properties, and cytocompatibility of degradable Zn-0.5Mn-xMg (x = 0.05 wt%, 0.2 wt%, 0.5 wt%) alloys was investigated. The microstructure, corrosion products, mechanical properties, and corrosion properties of the three alloys were then thoroughly characterized by scanning electron microscopy (SEM), electron back-scattered diffraction (EBSD), and other methods. According to the findings, the grain size of matrix was refined by the addition of Mg, while the size and quantity of Mg2Zn11 phase was increased. The Mg content could significantly improve the ultimate tensile strength (UTS) of the alloy. Compared with the Zn-0.5Mn alloy, the UTS of Zn-0.5Mn-xMg alloy was increased significantly. Zn-0.5Mn-0.5Mg exhibited the highest UTS (369.6 MPa). The strength of the alloy was influenced by the average grain size, the solid solubility of Mg, and the quantity of Mg2Zn11 phase. The increase in the quantity and size of Mg2Zn11 phase was the main reason for the transition from ductile fracture to cleavage fracture. Moreover, Zn-0.5Mn-0.2Mg alloy showed the best cytocompatibility to L-929 cells.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Sciences and Chemical Engineering, Ningbo University, Ningbo 315000, China

Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China

Department of Bioengineering, University of California, Riverside, CA 92521, USA

Ningbo Powerway Alloy Material Co., Ltd., Ningbo 315145, China

Hangzhou Kangji Medical Instrument Co., Ltd., Hangzhou 311509, China

Funding

National key Research and Development program of China

References (42)

Show source-provided references
1. Recent progress on coatings of biomedical magnesium alloy10.1016/j.smaim.2021.12.007 ↗
2. Venkateswarlu, B., Sunil, B.R., and Kumar, R.S. (Mater. Today Proc., 2023). Microstructure, mechanical properties and corrosion behavior of Rare Earths (RE) containing Mg-Zn alloy for biomedical applications, Mater. Today Proc., in press.10.1016/j.matpr.2023.02.342 ↗
3. Savaedi, Z., Motallebi, R., Mirzadeh, H., Mehdinavaz Aghdam, R., and Mahmudi, R. (2023). Superplasticity of fine-grained magnesium alloys for biomedical applications: A comprehensive review. Curr. Opin. Solid State Mater. Sci., 27.10.1016/j.cossms.2023.101058 ↗
4. Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing10.1016/j.jmbbm.2018.02.001 ↗
5. Chaudry, U.M., Hamad, K., and Jun, T.-S. (2022). Investigating the Microstructure, Crystallographic Texture and Mechanical Behavior of Hot-Rolled Pure Mg and Mg-2Al-1Zn-1Ca Alloy. Crystals, 12.10.3390/cryst12101330 ↗
6. Rybalchenko, O.V., Anisimova, N.Y., Kiselevsky, M.V., Rybalchenko, G.V., Martynenko, N.S., Bochvar, N.R., Tabachkova, N.Y., Shchetinin, I.V., Shibaeva, T.V., and Konushkin, S.V. (2022). Effect of equal-channel angular pressing on structure and properties of Fe-Mn-C alloys for biomedical applications. Mater. Today Commun., 30.10.1016/j.mtcomm.2021.103048 ↗
7. Gambaro, S., Paternoster, C., Occhionero, B., Fiocchi, J., Biffi, C.A., Tuissi, A., and Mantovani, D. (2021). Mechanical and degradation behavior of three Fe-Mn-C alloys for potential biomedical applications. Mater. Today Commun., 27.10.1016/j.mtcomm.2021.102250 ↗
8. In vitro degradation and biocompatibility of Fe–Pd and Fe–Pt composites fabricated by spark plasma sintering10.1016/j.msec.2013.10.023 ↗
9. Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn–Mg binary alloys10.1016/j.jmrt.2021.12.101 ↗
10. Fabrication and characterization of novel biodegradable Zn-Mn-Cu alloys10.1016/j.jmst.2017.11.026 ↗
11. Shi, Z.-Z., Gao, X.-X., Chen, H.-T., Liu, X.-F., Li, A., Zhang, H.-J., and Wang, L.-N. (2020). Enhancement in mechanical and corrosion resistance properties of a biodegradable Zn-Fe alloy through second phase refinement. Mater. Sci. Eng. C, 116.10.1016/j.msec.2020.111197 ↗
12. Yang, H., Jia, B., Zhang, Z., Qu, X., Li, G., Lin, W., Zhu, D., Dai, K., and Zheng, Y. (2020). Alloying design of biodegradable zinc as promising bone implants for load-bearing applications. Nat. Commun., 11.10.1038/s41467-019-14153-7 ↗
13. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: A comprehensive review10.1016/j.actbio.2019.01.035 ↗
14. Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application10.1016/j.matdes.2015.12.128 ↗
15. Multi-interactions of dislocations and refined microstructure in a high strength and toughness Zn-Mg-Mn alloy10.1016/j.jmrt.2020.09.126 ↗
16. Microalloyed Zn-Mn alloys: From extremely brittle to extraordinarily ductile at room temperature10.1016/j.matdes.2018.02.049 ↗
17. Ultra-fine-grained Zn-0.5Mn alloy processed by multi-pass hot extrusion: Grain refinement mechanism and room-temperature superplasticity10.1016/j.msea.2019.01.089 ↗
18. Development of a high-strength Zn-Mn-Mg alloy for ligament reconstruction fixation10.1016/j.actbio.2020.10.032 ↗
19. Structural and mechanical aspects of hypoeutectic Zn–Mg binary alloys for biodegradable vascular stent applications10.1016/j.bioactmat.2020.07.004 ↗
20. Jia, B., Zhang, Z., Zhuang, Y., Yang, H., Han, Y., Wu, Q., Jia, X., Yin, Y., Qu, X., and Zheng, Y. (2022). High-strength biodegradable zinc alloy implants with antibacterial and osteogenic properties for the treatment of MRSA-induced rat osteomyelitis. Biomaterials, 287.10.1016/j.biomaterials.2022.121663 ↗
21. Duan, J., Li, L., Liu, C., Suo, Y., Wang, X., and Yang, Y. (2022). Novel Zn-2Cu-0.2Mn-xLi (x = 0, 0.1 and 0.38) alloys developed for potential biodegradable implant applications. J. Alloy. Compd., 916.10.1016/j.jallcom.2022.165478 ↗
22. In vitro and in vivo studies of biodegradable Zn-Li-Mn alloy staples designed for gastrointestinal anastomosis10.1016/j.actbio.2020.12.017 ↗
23. Zhu, X., Ren, T., Guo, P., Yang, L., Shi, Y., Sun, W., and Song, Z. (2022). Strengthening mechanism and biocompatibility of degradable Zn-Mn alloy with different Mn content. Mater. Today Commun., 31.10.1016/j.mtcomm.2022.103639 ↗
24. Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration10.1016/j.msec.2019.01.120 ↗
25. Influence of Mg on the mechanical properties and degradation performance of as-extruded Zn-Mg-Ca alloys: In vitro and in vivo behavior10.1016/j.jmbbm.2019.04.029 ↗
26. Shi, Z., Bai, W., Liu, X., Zhang, H., Yin, Y., and Wang, L. (2019). Significant refinement of coarse (Fe, Mn)Zn13 phase in biodegradable Zn–1Mn-0.1Fe alloy with minor addition of rare earth elements. Mater. Charact., 158.10.1016/j.matchar.2019.109993 ↗
27. Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn–Mg–Sr alloys as biodegradable metals10.1016/j.matlet.2015.07.151 ↗
28. Microstructure and mechanical properties of the micrograined hypoeutectic Zn-Mg alloy10.1007/s12613-016-1336-7 ↗
29. Zhao, M., Jin, L., Dong, J., and Wang, F. (2018). Influence of twinning behavior on mechanical property of pure zinc deformed at room temperature. Chin. J. Nonferrous Met., 28.
30. Yue, R., Zhang, J., Ke, G., Jia, G., Huang, H., Pei, J., Kang, B., Zeng, H., and Yuan, G. (2019). Effects of extrusion temperature on microstructure, mechanical properties and in vitro degradation behavior of biodegradable Zn-3Cu-0.5Fe alloy. Mater. Sci. Eng. C, 105.10.1016/j.msec.2019.110106 ↗
31. Guo, P. (2019). Reseach on Microstructure Evolution and Performance of Biodegradable Ultrafine-Grained Zn-Mn Alloy. [Ph.D. Thesis, University of Chinese Academy of Sciences].
32. He, G., Liu, Z., and Liu, F. (2022). Effects of dislocation slip behaviour and second-phase particles on hot rolled texture of an Al-Cu-Mg alloy with a high Cu/Mg ratio. J. Alloys Compd., 911.10.1016/j.jallcom.2022.165085 ↗
33. Microstructures, mechanical properties and in vitro corrosion behavior of biodegradable Zn alloys microalloyed with Al, Mn, Cu, Ag and Li elements10.1016/j.jmst.2021.06.049 ↗
34. Effects of alloying elements (Ca and Sr) on microstructure, mechanical property and in vitro corrosion behavior of biodegradable Zn–1.5Mg alloy10.1016/j.jallcom.2015.10.116 ↗
35. Shuai, C., Zhong, S., Dong, Z., He, C., Shuai, Y., Yang, W., and Peng, S. (2022). Peritectic-eutectic transformation of intermetallic in Zn alloy: Effects of Mn on the microstructure, strength and ductility. Mater. Charact., 190.10.1016/j.matchar.2022.112054 ↗
36. Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies10.1016/j.jmst.2018.01.006 ↗
37. Impact of gadolinium on mechanical properties, corrosion resistance, and biocompatibility of Zn-1Mg-xGd alloys for biodegradable bone-implant applications10.1016/j.actbio.2022.02.015 ↗
38. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
39. Zn-based alloys as an alternative biodegradable materials
40. Lou, D., Zhang, M., Lv, J., Li, B., Wang, X., Shi, J., Ren, Y., Li, H., and Qin, G. (2022). Effects of Fe addition on the microstructures and mechanical properties of as-extruded Zn-0.2Mg alloys. J. Alloys Compd., 896.10.1016/j.jallcom.2021.162912 ↗
41. High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents10.1016/j.jmst.2019.06.009 ↗
42. Jiang, J., Qian, Y., Huang, H., Niu, J., and Yuan, G. (2022). Biodegradable Zn-Cu-Mn alloy with suitable mechanical performance and in vitro degradation behavior as a promising candidate for vascular stents. Biomater. Adv., 133.10.1016/j.msec.2022.112652 ↗