journal article·2023-03-27Open access

Effects of Fiber Loading on Mechanical Properties of Kenaf Nanocellulose Reinforced Nanohybrid Dental Composite Made of Rice Husk Silica

Su Bing Sheng, Rabihah Alawi, Yanti Johari, Nor Aidaniza Abdul Muttlib, Mohd Hazwan Hussin, Dasmawati Mohamad, Mohmed Isaqali Karobari

Abstract

The innovation of nanocellulose as reinforcement filler in composites has been a topic of interest in the development of new biomaterials. The objective of this study was to investigate the mechanical properties of a nanohybrid dental composite made of rice husk silica and loaded with different percentages of kenaf nanocellulose. Kenaf cellulose nanocrystals (CNC) were isolated and characterized using a transmission electron microscope (TEM) (Libra 120, Carl Zeiss, Germany). The experimental composite was fabricated with fiber loadings of 1 wt%, 2 wt%, 3 wt%, 4 wt%, and 6 wt% silane-treated kenaf CNC, and subjected to a flexural and compressive strength test (n = 7) using an Instron Universal Testing Machine (Shimadzu, Kyoto, Japan), followed by a scanning electron microscopic assessment of the flexural specimen’s fracture surface using a scanning electron microscope (SEM) (FEI Quanta FEG 450, Hillsborough, OR, USA). Commercial composites Filtek Z350XT (3M ESPE, St. Paul, MN, USA), Neofil (Kerr Corporation, Orange, CA, USA) and Ever-X Posterior (GC Corporation, Tokyo, Japan) were used as a comparison. The average diameter of kenaf CNC under TEM was 6 nm. For flexural and compressive strength tests, one-way ANOVA showed a statistically significant difference (p < 0.05) between all groups. Compared to the control group (0 wt%), the incorporation of kenaf CNC (1 wt%) into rice husk silica nanohybrid dental composite showed a slight improvement in mechanical properties and modes of reinforcement, which was reflected in SEM images of the fracture surface. The optimum dental composite reinforcement made of rice husk was 1 wt% kenaf CNC. Excessive fiber loading results in a decline in mechanical properties. CNC derived from natural sources may be a viable alternative as a reinforcement co-filler at low concentrations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Polysaccharides and Plant Cell Walls

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Dental Sciences, Universiti Sains Malaysia, Health Campus, Kubang Kerian, Kota Bharu 16150, Kelantan, Malaysia

School of Chemical Sciences, Universiti Sains Malaysia, Minden 11800, Penang, Malaysia

Conservative Dentistry Unit, School of Dental Sciences, Universiti Sains Malaysia, Health Campus, Kubang Kerian, Kota Bharu 16150, Kelantan, Malaysia

Department of Conservative Dentistry & Endodontics, Saveetha Dental College & Hospitals, Saveetha Institute of Medical and Technical Sciences University, Chennai 600077, Tamil Nadu, India

Funding

Ministry of Higher Education Malaysia for Fundamental Research Grant Scheme

References (75)

Show source-provided references
1. Resin composite restorative materials10.1111/j.1834-7819.2010.01296.x ↗
2. Short Fiber Reinforced Composite: A New Alternative for Direct Onlay Restorations10.2174/1874210601307010181 ↗
3. Mechanical properties and fracture behavior of flowable fiber reinforced composite restorations10.1016/j.dental.2018.01.002 ↗
4. A novel zirconia fibre-reinforced resin composite for dental use10.1016/j.jmbbm.2015.08.018 ↗
5. International Labour Office (1990). Safety in the Use of Mineral and Synthetic Fibres, International Labour Office.
6. World Health Organization, and International Agency for Research on Cancer Iarc Working Group on the Evaluation of Carcinogenic Risks to Humans (2002). Man-Made Vitreous Fibres (IARC Monographs on the Evaluation of Carcinogenic Risks to Humans, 1017–1606; v. 81), International Agency for Research on Cancer.
7. Cancer mortality of an ltalian cohort of workers in man-made glass-fiber production
8. Review of Recent Research into Cellulosic Whiskers, Their Properties and Their Application in Nanocomposite Field10.1021/bm0493685 ↗
9. Dental glass ionomer cement reinforced by cellulose microfibers and cellulose nanocrystals10.1016/j.msec.2015.08.041 ↗
10. Microscopy Observation on Nanocellulose from Kenaf Fibre10.4028/www.scientific.net/AMR.488-489.72 ↗
11. Shen, R., Xue, S., Xu, Y., Liu, Q., Feng, Z., Ren, H., Zhai, H., and Kong, F. (2020). Research Progress and Development Demand of Nanocellulose Reinforced Polymer Composites. Polymers, 12.10.3390/polym12092113 ↗
12. Nanocellulose in biomedicine: Current status and future prospect10.1016/j.eurpolymj.2014.07.025 ↗
13. Tensile and thermal properties of nanocellulose-reinforced poly(vinyl alcohol) nanocomposites10.1016/j.jiec.2010.10.006 ↗
14. Mohammad, F., Al-Lohedan, H.A., and Jawaid, M. (2020). Sustainable Nanocellulose and Nanohydrogels from Natural Sources, Elsevier.10.1016/B978-0-12-816789-2.00001-8 ↗
15. Cellulose nanomaterial reinforced polymer nanocomposites10.1016/j.cocis.2017.01.004 ↗
16. Evaluation Of Nanocellulose Biocompatibility And Of Compressive Strength Increase In Flowable Dental Composites
17. Biofiber-reinforced polypropylene composites10.1002/pen.11691 ↗
18. Bismarck, A., Mishra, S., and Lampke, T. (2005). Natural Fibers, Biopolymers, and Biocomposites, CRC Press.
19. André, A. (2006). Forskningsrapport / Luleå Tekniska Universitet, Luleå tekniska universitet.
20. Potentials of kenaf fibre in bio-composite production: A review
21. Evaluation of Flexural Strength and Radiopacity of Polymethyl Methacrylate Incorporated with Kenaf Fiber
22. Nanohybrid dental composite using silica from biomass waste10.1016/j.powtec.2016.05.035 ↗
23. Water sorption, solubility, degree of conversion, and surface hardness and topography of flowable composite utilizing nano silica from rice husk10.1016/j.jmrt.2021.10.024 ↗
24. Effect of kenaf short fiber loading on mechanical properties of biocomposites10.1088/1755-1315/65/1/012015 ↗
25. Cellulose nanocrystals isolated from oil palm trunk10.1016/j.carbpol.2015.03.043 ↗
26. Physicochemical Studies of Kenaf Nanocrystaline Cellulose and Poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) as Filler for Lithium Perchlorate based Polymer Electrolyte10.20964/2019.02.35 ↗
27. A novel approach for extracting cellulose nanofibers from lignocellulosic biomass by ball milling combined with chemical treatment10.1002/app.42990 ↗
28. The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites10.1016/j.compositesb.2014.08.025 ↗
29. Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review10.1007/s10924-006-0042-3 ↗
30. Dynamic mechanical behaviour of kenaf cellulosic fibre biocomposites: A comprehensive review on chemical treatments10.1007/s10570-021-03710-3 ↗
31. Kenaf fiber reinforced composites: A review10.1016/j.matdes.2011.04.008 ↗
32. Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment10.1016/j.biortech.2009.12.010 ↗
33. Towards a good interphase between bleached kraft softwood fibers and poly(lactic) acid10.1016/j.compositesb.2016.05.008 ↗
34. Husnil, Y., Yuanita, E., Novovic, A.A., Enyta, T., and Chalid, M. (2019, January 23–24). The effect of bleaching treatment on the mechanical strength of PP-Kenaf composite. Proceedings of the 5th International Symposium on Applied Chemistry 2019, Tangerang, Indonesia.10.1063/1.5134615 ↗
35. Nanocellulose as a natural source for groundbreaking applications in materials science: Today’s state10.1016/j.mattod.2018.02.001 ↗
36. Isolation and Fractionation of Cellulose Nanocrystals from Kenaf Core
37. Extraction of cellulose nanocrystals from plant sources for application as reinforcing agent in polymers10.1016/j.compositesb.2015.01.008 ↗
38. Nanocellulose prepared by acid hydrolysis of isolated cellulose from sugarcane bagasse10.1088/1757-899X/107/1/012045 ↗
39. Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers10.1007/s10570-012-9684-6 ↗
40. Sonosynthesis of Cellulose Nanoparticles (CNP) from Kenaf Fiber: Effects of Processing Parameters10.1007/s12221-016-5813-4 ↗
41. A technique for production of nanocrystalline cellulose with a narrow size distribution10.1007/s10570-009-9277-1 ↗
42. Simple centrifugal fractionation to reduce the size distribution of cellulose nanofibers10.1038/s41598-020-68642-7 ↗
43. High-aspect ratio fillers: Fiber-reinforced composites and their anisotropic properties10.1016/j.dental.2014.07.009 ↗
44. Discontinuous fiber-reinforced composites above critical length10.1177/154405910508400414 ↗
45. Thermoplastic polyurethane composites reinforced with renewable and sustainable fillers—A review
46. A review of recent developments in natural fibre composites and their mechanical performance10.1016/j.compositesa.2015.08.038 ↗
47. Cellulose nanocrystal deposition onto regenerated cellulose fibers: Effect on moisture absorption and fiber–matrix adhesion10.1007/s10570-018-1680-z ↗
48. Spectroscopy Analysis of Chemical Modification of Cellulose Fibers
49. Interaction of Silane Coupling Agents with Cellulose10.1021/la011657g ↗
50. Bociong, K., Szczesio-Włodarczyk, A., Sokolowski, K., Domarecka, M., Sokolowski, J., Krasowski, M., and Łukomska-Szymańska, M. (2017). The Influence of Water Sorption of Dental Light-Cured Composites on Shrinkage Stress. Materials, 10.10.3390/ma10101142 ↗
51. The Effect of Incorporation of Cellulose Kenaf Fibers in Composite Resin on Mechanical Properties and Surface Topography Analysis Using Scanning Electron Microscopy10.1055/s-0041-1732918 ↗
52. Mechanical Properties of Dental Composite Reinforced with Natural Fiber
53. (2019). Dentistry—Polymer-Based Restorative Materials (Standard No. ISO 4049).
54. Sun, B., Kong, F., Zhang, M., Wang, W., Kc, B.S., Tjong, J., and Sain, M. (2020). Percolation Model for Renewable-Carbon Doped Functional Composites in Packaging Application: A Brief Review. Coatings, 10.10.3390/coatings10020193 ↗
55. Electrical and mechanical percolation in graphene-latex nanocomposites10.1016/j.polymer.2014.08.025 ↗
56. Stimuli-Responsive Polymer Nanocomposites Inspired by the Sea Cucumber Dermis10.1126/science.1153307 ↗
57. Nanocomposite materials from latex and cellulose whiskers10.1002/pat.1995.220060514 ↗
58. The Effects of Shape on The Interaction of Colloidal Particles10.1111/j.1749-6632.1949.tb27296.x ↗
59. Chiral nematic suspensions of cellulose crystallites; phase separation and magnetic field orientation10.1080/02678299408036525 ↗
60. Effect of electrostatic interaction on the liquid crystal phase transition in solutions of rodlike polyelectrolytes10.1021/ma00162a020 ↗
61. Simplified Onsager theory for isotropic–nematic phase equilibria of length polydisperse hard rods10.1063/1.1499718 ↗
62. Filler–filler interactions and viscoelastic behavior of polymer nanocomposites10.1016/j.msea.2004.04.064 ↗
63. Percolation model of reinforcement efficiency for carbon nanotubes dispersed in thermoplastics10.1016/j.compositesa.2016.03.031 ↗
64. Biodegradable Composite Films based on κ-carrageenan Reinforced by Cellulose Nanocrystal from Kenaf Fibers10.15376/biores.10.1.256-271 ↗
65. Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/kenaf composite10.3144/expresspolymlett.2010.10 ↗
66. Mechanical Properties of Kenaf—Unsaturated Polyester Composites: Effect of Fiber Treatment and Fiber Length10.4028/www.scientific.net/AMR.311-313.260 ↗
67. Chieng, B.W., Lee, S.H., Ibrahim, N.A., Then, Y.Y., and Loo, Y.Y. (2017). Isolation and Characterization of Cellulose Nanocrystals from Oil Palm Mesocarp Fiber. Polymers, 9.10.3390/polym9080355 ↗
68. The effect of refractive index of fillers and polymer matrix on translucency and color matching of dental resin composite10.1080/26415275.2021.1906879 ↗
69. Wang, L. (2021). Cellulose Light Interactions-Relationship between Refractive Index and Surface Chemistry of Cellulose Nanocrystals. [Master’s Thesis, Chalmers University of Technology].
70. Cellulose nanocrystals and related nanocomposites: Review of some properties and challenges10.1002/polb.23490 ↗
71. Functional inorganic nanofillers for transparent polymers10.1039/b608177k ↗
72. Mechanical Performance and Transparency of Nanocellulose Reinforced Polymer Nanocomposites10.1002/mame.201300232 ↗
73. The Effect of Bagasse Fiber (Saccharum officinarum L.) Addition on the Strength of Bulk Fill Composite Resin
74. Effect of Thermal Cycling on Flexural Properties of Microcrystalline Cellulose-Reinforced Denture Base Acrylic Resins10.1111/jopr.13018 ↗
75. Effects of surface treatment of TiO2 nanoparticles on the adhesion and anticorrosion properties of the epoxy coating on mild steel using electrochemical technique10.1016/j.porgcoat.2018.02.019 ↗