journal article·2015-12-21Open access

Novel Method for Loading Microporous Ceramics Bone Grafts by Using a Directional Flow

Michael Seidenstuecker, Steffen Kissling, Juergen Ruehe, Norbert Suedkamp, Hermann Mayr, Anke Bernstein

Abstract

The aim of this study was the development of a process for filling the pores of a β-tricalcium phosphate ceramic with interconnected porosity with an alginate hydrogel. For filling of the ceramics, solutions of alginate hydrogel precursors with suitable viscosity were chosen as determined by rheometry. For loading of the porous ceramics with the gel the samples were placed at the flow chamber and sealed with silicone seals. By using a vacuum induced directional flow, the samples were loaded with alginate solutions. The loading success was controlled by ESEM and fluorescence imaging using a fluorescent dye (FITC) for staining of the gel. After loading of the pores, the alginate is transformed into a hydrogel through crosslinking with CaCl2 solution. The biocompatibility of the obtained composite material was tested with a live dead cell staining by using MG-63 Cells. The loading procedure via vacuum assisted directional flow allowed complete filling of the pores of the ceramics within a few minutes (10 ± 3 min) while loading through simple immersion into the polymer solution or through a conventional vacuum method only gave incomplete filling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications · Periodontal Regeneration and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Surgery, Department of Orthopedics and Trauma Surgery, Medical Center-University of Freiburg, Hugstetter str. 55, Freiburg D-79106, Germany

Laboratory for Chemistry and Physics of Interfaces, Department of Microsystems Engineering-IMTEK, University of Freiburg, Georges-Koehler-Allee 103, Freiburg D-79110, Germany

References (30)

Show source-provided references
1. Revolutionizing orthopaedic biomaterials: The potential of biodegradable and bioresorbable magnesium-based materials for functional tissue engineering10.1016/j.jbiomech.2013.12.003 ↗
2. The effect of thickness and pressure on the curing of PMMA bone cement for the total hip joint replacement10.1016/0021-9290(80)90014-7 ↗
3. Functional tissue engineering: The role of biomechanics10.1115/1.1318906 ↗
4. Evaluation of a biodegradable ceramic10.1002/jbm.820110204 ↗
5. Die biologische und medizinische bedeutung von calciumphosphaten10.1002/1521-3757(20020902)114:17<3260::AID-ANGE3260>3.0.CO;2-S ↗
6. Bone regeneration: Molecular and cellular interactions with calcium phosphate ceramics
7. Enhancement of fracture healing with autogenous and allogeneic bone grafts10.1097/00003086-199810001-00024 ↗
8. Biocompatibility of xenogeneic bone, commercially available coral, a bioceramic and tissue sealant for human osteoblasts10.1016/0142-9612(94)90210-0 ↗
9. Calcium orthophosphates in medicine: From ceramics to calcium phosphate cements10.1016/S0020-1383(00)80022-4 ↗
10. Synthetic, pure-phase β-tricalcium phosphate ceramic granules (cerasorb®) for bone regeneration in the reconstructive surgery of the jaws10.1016/j.ijom.2006.03.017 ↗
11. Calcium phosphate cements as bone drug delivery systems: A review10.1016/j.jconrel.2006.04.007 ↗
12. Calcium phosphate cements as drug delivery materials10.1016/j.addr.2012.01.008 ↗
13. Immersion coating of pellet cores consisting of chitosan and calcium intended for colon drug delivery10.1016/j.ejpb.2010.02.012 ↗
14. Seidenstuecker, M., Mrestani, Y., Neubert, R.H.H., Bernstein, A., and Mayr, H.O. (2013). Release kinetics and antibacterial efficacy of microporous β-TCP coatings. J. Nanomater., 2013.10.1155/2013/842951 ↗
15. A simple equation for the description of solute release. III. Coupling of diffusion and relaxation10.1016/0378-5173(89)90306-2 ↗
16. A new concept of gentamicin loaded HAP/TCP bone substitute for prophylactic action: In vitro release validation10.1007/s10856-007-0163-9 ↗
17. Epple, M. (2003). Biomaterialien und Biomineralisation, Teubner Verlag.10.1007/978-3-322-80035-0 ↗
18. Alginate in drug delivery systems10.1081/DDC-120003853 ↗
19. Sustained release of erythropoietin using biodegradable gelatin hydrogel microspheres persistently improves lower leg ischemia10.1016/j.jacc.2009.02.056 ↗
20. The drug release profile from calcium-induced alginate gel beads coated with an alginate hydrolysate10.3390/12112559 ↗
21. Long-term and zero-order release of basic fibroblast growth factor from heparin-conjugated poly(l-lactide-co-glycolide) nanospheres and fibrin gel10.1016/j.biomaterials.2005.08.030 ↗
22. Release of growth factors from gelatin microsphere/CaP composites
23. Elastomeric high-mineral content hydrogel-hydroxyapatite composites for orthopedic applications10.1002/jbm.a.32110 ↗
24. Development of porous apatite ceramic for local delivery of chemotherapeutic agents10.1002/(SICI)1097-4636(19980315)39:4<536::AID-JBM5>3.0.CO;2-K ↗
25. Compressive and shear properties of alginate gel: Effects of sodium ions and alginate concentration10.1002/(SICI)1097-4636(199910)47:1<46::AID-JBM6>3.0.CO;2-N ↗
26. Determination of intrinsic viscosity of alginates10.3891/acta.chem.scand.16-1569 ↗
27. Aqueous impregnation of porous β-tricalcium phosphate scaffolds10.1016/j.actbio.2010.01.018 ↗
28. Histological and histomorphometric investigations on bone integration of rapidly resorbable calcium phosphate ceramics10.1002/jbm.b.30891 ↗
29. Microporous pure β-tricalcium phosphate implants for press-fit fixation of anterior cruciate ligament grafts: Strength and healing in a sheep model10.1016/j.arthro.2009.02.019 ↗
30. PromoKine (2015). Live/Dead Cell Staining Kit II—Instruction Manual, PromoCell GmbH.