journal article·2023-08-04Open access

Evaluation of Biocompatibility of PLA/PHB/TPS Polymer Scaffolds with Different Additives of ATBC and OLA Plasticizers

Marianna Trebuňová, Patrícia Petroušková, Alena Findrik Balogová, Gabriela Ižaríková, Peter Horňak, Darina Bačenková, Jana Demeterová, Jozef Živčák

Abstract

One of the blends that is usable for 3D printing while not being toxic to cell cultures is the lactic acid (PLA)/polyhydroxybutyrate (PHB)/thermoplastic starch (TPS) blend. The addition of plasticizers can change the rate of biodegradation and the biological behavior of the material. In order to evaluate the potential of the PLA/PHB/TPS material in combination with additives (plasticizers: acetyl tributyl citrate (ATBC) and oligomeric lactic acid (OLA)), for use in the field of biomedical tissue engineering, we performed a comprehensive in vitro characterization of selected mixture materials. Three types of materials were tested: I: PLA/PHB/TPS + 25% OLA, II: PLA/PHB/TPS + 30% ATBC, and III: PLA/PHB/TPS + 30% OLA. The assessment of the biocompatibility of the materials included cytotoxicity tests, such as monitoring the viability, proliferation and morphology of cells and their deposition on the surface of the materials. The cell line 7F2 osteoblasts (Mus musculus) was used in the experiments. Based on the test results, the significant influence of plasticizers on the material was confirmed, with their specific proportions in the mixtures. PLA/PHB/TPS + 25% OLA was evaluated as the optimal material for biocompatibility with 7F2 osteoblasts. The tested biomaterials have the potential for further investigation with a possible change in the proportion of plasticizers, which can have a fundamental impact on their biological properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomedical Engineering and Measurement, Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 042 00 Košice, Slovakia

Centre for Experimental and Clinical Regenerative Medicine, University of Veterinary Medicine and Pharmacy in Košice, Komenského 73, 041 81 Košice, Slovakia

Institute of Materials and Quality Engineering, Faculty of Materials, Metallurgy and Recycling, Technical University of Košice, Letná 9, 042 00 Košice, Slovakia

Funding

MŠVVaŠ SR · The Slovak Research and Development Agency

References (32)

Show source-provided references
1. In Vitro Hemocompatibility Testing of Biomaterials According to the ISO 10993-410.1016/S1389-0344(02)00015-1 ↗
2. In Vivo and in Vitro Testing for the Biological Safety Evaluation of Biomaterials and Medical Devices
3. Boey, J.Y., Mohamad, L., Khok, Y.S., Tay, G.S., and Baidurah, S. (2021). A Review of the Applications and Biodegradation of Polyhydroxyalkanoates and Poly(Lactic Acid) and Its Composites. Polymers, 13.10.3390/polym13101544 ↗
4. The Effect of Scaffold Macroporosity on Angiogenesis and Cell Survival in Tissue-Engineered Smooth Muscle10.1016/j.biomaterials.2014.03.025 ↗
5. Processing and Characterization of Poly(Lactic Acid) Films Plasticized with Commercial Adipates10.1002/app.29784 ↗
6. Tümer, E.H., and Erbil, H.Y. (2021). Extrusion-Based 3D Printing Applications of PLA Composites: A Review. Coatings, 11.10.3390/coatings11040390 ↗
7. PLA-FMWCNT Bionanofilms with High Modulus and Great Properties to Apply in Packaging and Biomedicine10.1016/j.mspro.2015.04.088 ↗
8. Designing of PLA Scaffolds for Bone Tissue Replacement Fabricated by Ordinary Commercial 3D Printer10.1186/s13036-017-0074-3 ↗
9. Three-Dimensional Printed PLA Scaffold and Human Gingival Stem Cell-Derived Extracellular Vesicles: A New Tool for Bone Defect Repair10.1186/s13287-018-0850-0 ↗
10. Rodriguez-Contreras, A. (2019). Recent Advances in the Use of Polyhydroyalkanoates in Biomedicine. Bioengineering, 6.10.3390/bioengineering6030082 ↗
11. Pryadko, A.S., Botvin, V.V., Mukhortova, Y.R., Pariy, I., Wagner, D.V., Laktionov, P.P., Chernonosova, V.S., Chelobanov, B.P., Chernozem, R.V., and Surmeneva, M.A. (2022). Core-Shell Magnetoactive PHB/Gelatin/Magnetite Composite Electrospun Scaffolds for Biomedical Applications. Polymers, 14.10.3390/polym14030529 ↗
12. Biodegradable Electrospun PLA-PHB Fibers Plasticized with Oligomeric Lactic Acid10.1016/j.polymdegradstab.2020.109226 ↗
13. Culenova, M., Birova, I., Alexy, P., Galfiova, P., Nicodemou, A., Moncmanova, B., Plavec, R., Tomanova, K., Mencik, P., and Ziaran, S. (2021). In Vitro Characterization of Poly(Lactic Acid)/ Poly(Hydroxybutyrate)/ Thermoplastic Starch Blends for Tissue Engineering Application. Cell Transplant., 30.10.1177/09636897211021003 ↗
14. In Vivo and Post-Synthesis Strategies to Enhance the Properties of PHB-Based Materials: A Review10.3389/fbioe.2020.619266 ↗
15. Mosnáčková, K., Opálková Šišková, A., Kleinová, A., Danko, M., and Mosnáček, J. (2020). Properties and Degradation of Novel Fully Biodegradable PLA/PHB Blends Filled with Keratin. Int. J. Mol. Sci., 21.10.3390/ijms21249678 ↗
16. Zhuikov, V.A., Akoulina, E.A., Chesnokova, D.V., Wenhao, Y., Makhina, T.K., Demyanova, I.V., Zhuikova, Y.V., Voinova, V.V., Belishev, N.V., and Surmenev, R.A. (2021). The Growth of 3T3 Fibroblasts on PHB, PLA and PHB/PLA Blend Films at Different Stages of Their Biodegradation In Vitro. Polymers, 13.10.3390/polym13010108 ↗
17. Polymer materials and their use in veterinary practice
18. Bionanocomposite Films Based on Plasticized PLA–PHB/Cellulose Nanocrystal Blends10.1016/j.carbpol.2014.12.056 ↗
19. Arrieta, M.P., Samper, M.D., Aldas, M., and López, J. (2017). On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications. Materials, 10.10.3390/ma10091008 ↗
20. Synthesis and Characterization of Lactic Acid Oligomers: Evaluation of Performance as Poly(Lactic Acid) Plasticizers10.1007/s10924-013-0628-5 ↗
21. Biocompatibility, Biodegradation and Excretion of Polylactic Acid (PLA) in Medical Implants and Theranostic Systems
22. Leonés, A., Peponi, L., Lieblich, M., Benavente, R., and Fiori, S. (2020). In Vitro Degradation of Plasticized PLA Electrospun Fiber Mats: Morphological, Thermal and Crystalline Evolution. Polymers, 12.10.3390/polym12122975 ↗
23. Kohan, M., Lancoš, S., Schnitzer, M., Živčák, J., and Hudák, R. (2022). Analysis of PLA/PHB Biopolymer Material with Admixture of Hydroxyapatite and Tricalcium Phosphate for Clinical Use. Polymers, 14.10.3390/polym14245357 ↗
24. Findrik Balogová, A., Trebuňová, M., Ižaríková, G., Kaščák, Ľ., Mitrík, L., Klímová, J., Feranc, J., Modrák, M., Hudák, R., and Živčák, J. (2021). In Vitro Degradation of Specimens Produced from PLA/PHB by Additive Manufacturing in Simulated Conditions. Polymers, 13.10.3390/polym13101542 ↗
25. Preparation and Characterization of Environmentally Safe and Highly Biodegradable Microbial Polyhydroxybutyrate (PHB) Based Graphene Nanocomposites for Potential Food Packaging Applications10.1016/j.ijbiomac.2020.03.084 ↗
26. Synthesis, Colloidal Properties and Cytotoxicity of Biopolymer Nanoparticles10.1007/s12010-014-1172-z ↗
27. Functional Properties of Plasticized Bio-Based Poly(Lactic Acid)_Poly(Hydroxybutyrate) (PLA_PHB) Films for Active Food Packaging10.1007/s11947-016-1846-3 ↗
28. Bio-Based PLA_PHB Plasticized Blend Films: Processing and Structural Characterization10.1016/j.lwt.2015.06.032 ↗
29. Determination of Geometrical and Viscoelastic Properties of PLA/PHB Samples Made by Additive Manufacturing for Urethral Substitution10.1016/j.jbiotec.2018.08.019 ↗
30. Effect of Chitosan and Catechin Addition on the Structural, Thermal, Mechanical and Disintegration Properties of Plasticized Electrospun PLA-PHB Biocomposites10.1016/j.polymdegradstab.2016.02.027 ↗
31. D’Anna, A., Arrigo, R., and Frache, A. (2019). PLA/PHB Blends: Biocompatibilizer Effects. Polymers, 11.10.3390/polym11091416 ↗
32. Properties of Scaffolds Prepared by Fused Deposition Modeling of Poly(Hydroxyalkanoates)10.1016/j.ijbiomac.2020.06.022 ↗