journal article·2022-02-28Open access

Degradation of Dental Methacrylate-Based Composites in Simulated Clinical Immersion Media

Nicoleta Ilie

Abstract

The selection of restorative materials with regard to the longevity and durability of a restoration is of crucial importance for daily dental practice and requires that the degradation of the material in the oral environment can be assessed. The aim of this study was to investigate the extent to which the mechanical properties of four (Esthet X, Ceram X, Filtek Supreme XT, and Filtek Supreme XT flow) resin-based composites (RBCs) alter during storage in saliva substitutes (artificial saliva) for 24 h and 28 days and in the context of simulated, more aggressive clinical conditions, including cycles exposure to de- and remineralization, alcohol, or salivary enzymes. For this purpose, flexural strength and modulus were determined in a three-point bending test (n = 20) followed by Weibull analysis, while quasi-static behavior was evaluated by instrumented indentation techniques. Degradation occurred in all RBCs and all aging protocols and was quantifiable at both macroscopic and microscopic levels. The postulated stabilizing effect on degradation through the incorporation of urethane-based co-monomers into the organic matrix or a higher filler loading is refuted. Even though modern RBCs show high clinical survival rates, biodegradation remains an issue that needs to be addressed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Conservative Dentistry and Periodontology, University Hospital, LMU, 80336 Munich, Germany

References (42)

Show source-provided references
1. Clinical and micromorphologic 29-year results of posterior composite restorations10.1177/0022034518788798 ↗
2. A randomized controlled 27 years follow up of three resin composites in Class II restorations10.1016/j.jdent.2015.09.003 ↗
3. Ilie, N. (2020). Spatial distribution of the micro-mechanical properties in high-translucent CAD/CAM resin-composite blocks. Materials, 28.10.3390/ma13153352 ↗
4. Spatial and cure-time distribution of dynamic-mechanical properties of a dimethacrylate nano-composite10.1016/j.dental.2008.11.008 ↗
5. Investigations on mechanical behaviour of dental composites10.1007/s00784-009-0258-4 ↗
6. Detection of ions released from S-PRG fillers and their modulation effect10.4012/dmj.2010-015 ↗
7. Resin composite—state of the art10.1016/j.dental.2010.10.020 ↗
8. A prospective randomised clinical trial of one bis-GMA-based and two ormocer-based composite restorative systems in class II cavities: Three-year results10.1016/j.jdent.2006.07.002 ↗
9. Biodegradation of resin–dentin interfaces is dependent on the restorative material, mode of adhesion, esterase or MMP inhibition10.1016/j.dental.2018.05.008 ↗
10. Biodegradation of composite resin with ester linkages: Identifying human salivary enzyme activity with a potential role in the esterolytic process10.1016/j.dental.2014.05.031 ↗
11. The influence of resin chemistry on a dental composite’s biodegradation10.1002/jbm.a.30000 ↗
12. Enzymatic degradation of BISGMA/TEGDMA-polymers causing decreased microhardness and greater wear in vitro
13. Biodegradation of resin composites and adhesives by oral bacteria and saliva: A rationale for new material designs that consider the clinical environment and treatment challenges10.1016/j.dental.2013.08.201 ↗
14. Mechanisms of polymer degradation and erosion10.1016/0142-9612(96)85755-3 ↗
15. Salivary esterase activity and its association with the biodegradation of dental composites10.1177/154405910408300105 ↗
16. Mutual influence of cholesterol esterase and pseudocholinesterase on the biodegradation of dental composites10.1016/j.biomaterials.2003.08.029 ↗
17. Relation of dental composite formulations to their degradation and the release of hydrolyzed polymeric-resin-derived products10.1177/10454411010120020401 ↗
18. Chapter 2 hydrolysis and formation of esters of organic acids
19. Influence of silanated filler content on the biodegradation of bisGMA/TEGDMA dental composite resins10.1002/jbm.a.31004 ↗
20. Silane content influences physicochemical properties in nanostructured model composites10.1016/j.dental.2020.10.022 ↗
21. Comparison between published clinical success of direct resin composite restorations in vital posterior teeth in 1995–2005 and 2006–2016 periods10.1111/adj.12487 ↗
22. Resin-based composite performance: Are there some things we can’t predict?10.1016/j.dental.2012.06.013 ↗
23. Quinn, G.D. (1992). Room-Temperature Flexure Fixture for Advanced Ceramics, NISTIR 4877.10.6028/NIST.IR.4877 ↗
24. ISO (2019). Dentistry—Polymer-Based Restorative Materials: International Organization for Standardization (Standard No. ISO 4049:2019). p. 29.
25. Alternating demineralization and remineralization of artificial enamel lesions10.1159/000260599 ↗
26. ISO (2015). Metallic Materials—Instrumented Indentation Test for Hardness and Materials Parameters—Part 1: Test Method (Standard No. ISO 14577-1:2015). p. 46.
27. A statistical distribution function of wide applicability
28. The evolution of dental materials over the past century: Silver and gold to tooth color and beyond10.1177/0022034518822808 ↗
29. The dental amalgam phasedown in New Zealand: A 20-year trend10.2341/19-024-C ↗
30. Laboratory mechanical parameters of composite resins and their relation to fractures and wear in clinical trials—A systematic review10.1016/j.dental.2016.11.013 ↗
31. Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites10.1016/j.dental.2009.02.005 ↗
32. Filler particle leachability of experimental dental composites10.1034/j.1600-0722.2000.00919.x ↗
33. Characterization of acquired denture pellicle from healthy and stomatitis patients10.1016/0022-3913(92)90387-P ↗
34. The dependence of lysozyme activity on pH and ionic strength10.1016/0005-2744(69)90397-0 ↗
35. Color changes of dental resin composites by a salivary enzyme10.1002/jbm.b.30018 ↗
36. Degradation of methacrylate monomers in human saliva10.4012/dmj.25.241 ↗
37. Hydrolytic degradation of dental composites10.1177/00220345840630101701 ↗
38. Physical properties of current dental nanohybrid and nanofill light-cured resin composites10.1016/j.dental.2011.02.015 ↗
39. New inorganic/organic copolymers (ORMOCERs) for dental application10.1557/PROC-346-143 ↗
40. Sol–gel materials: 2. Light-curing dental composites based on ormocers of cross-linking alkoxysilane methacrylates and further nano-components10.1016/j.dental.2007.10.004 ↗
41. Effect of food-simulating liquids on the shear punch strength of composite and polyacid-modified composite restoratives
42. Academy of Dental Materials guidance—Resin composites: Part I—Mechanical properties10.1016/j.dental.2017.04.013 ↗