Effect of Modification with Helium Atmospheric-Pressure Plasma and Deep-Ultraviolet Light on Adhesive Shear Strength of Fiber-Reinforced Poly(ether-ether-ketone) Polymer
Source abstract
Abstract
We investigated the effect of helium atmospheric-pressure plasma (PL) and deep-ultraviolet (UV) light treatments on the adhesive properties of fiber-reinforced poly(ether-ether-ketone) polymer (PEEK). PEEK disks reinforced with carbon (CPEEK) or glass (GPEEK) fibers were polished, modified with PL and UV for 60 s, and the surface energy was calculated by measuring the contact angles. The disk surfaces were analyzed by X-ray photoemission spectroscopy. Shear bond strength testing was performed using a universal testing machine, and the fracture surfaces were observed by electron probe microanalyzer. Data were analyzed with one and two-way ANOVA and Tukey’s post-hoc test (p < 0.05). The surface energies were increased by the modifications, which created OH functional groups on the surfaces. The bond strengths of CPEEK were increased by PL, and those of GPEEK were increased by PL and UV, owing to chemical bonding at the interface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Tribology and Wear Analysis · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Biomimetics, Faculty of Dentistry & Graduate School of Medical and Dental Sciences, Niigata University, 2-5274, Gakkocho-dori, Chuo-ku, Niigata 951-8514, Japan
Division of Bio-Prosthodontics, Faculty of Dentistry & Graduate School of Medical and Dental Sciences, Niigata University, 2-5274, Gakkocho-dori, Chuo-ku, Niigata 951-8514, Japan
References (28)
Show source-provided references
1. PEEK biomaterials in trauma, orthopedic, and spinal implants10.1016/j.biomaterials.2007.07.013 ↗
2. Three-unit reinforced Polyetheretherketone composite FDPs: Influence of fabrication method on load-bearing capacity and failure types10.4012/dmj.2013-345 ↗
3. Feasibility of knitted carbon/PEEK composites for orthopedic bone plates10.1016/j.biomaterials.2003.10.050 ↗
4. Applications of Polyetheretherketone (PEEK) in oral implantology and prosthodontics10.1016/j.jpor.2015.10.001 ↗
5. Carbon-nanofibre- reinforced poly(ether ether ketone) composites10.1016/S1359-835X(02)00084-2 ↗
6. Evaluation of shear bond strength between PEEK and resin-based luting material10.1016/j.job.2017.09.003 ↗
7. Impact of air-abrasion pressure and adhesive systems on bonding parameters for polyetheretherketone dental restorations10.1016/j.ijadhadh.2017.10.002 ↗
8. Effect of different surface pre-treatments and luting materials on shear strength to PEEK10.1016/j.dental.2010.02.003 ↗
9. The improvement of adhesive properties of PEEK through different pre-treatments10.1016/j.apsusc.2012.04.040 ↗
10. The effect of different surface treatments on the bond strength of PEEK composite materials10.1016/j.dental.2014.03.011 ↗
11. Work of adhesion between resin composite cements and PEEK as a function of etching duration with sulfuric acid and its correlation with bond strength values10.1016/j.ijadhadh.2014.06.006 ↗
12. PEEK surface treatment effects on tensile bond strength to veneering resins10.1016/j.prosdent.2014.05.014 ↗
13. Polyetheretherketone- A suitable material for fixed denture prostheses?10.1002/jbm.b.32932 ↗
14. Laser surface modification of poly(etheretherketone) to enhance surface free energy, wettability and adhesion10.1016/j.ijadhadh.2015.06.005 ↗
15. Laser surface modification of PEEK10.1016/j.apsusc.2012.01.154 ↗
16. Enhancement of the adhesive bonding properties of PEEK by excimer laser treatment10.1016/S0143-7496(97)00063-8 ↗
17. Improved adhesion to polymers by UV/ozone surface oxidation10.1016/0143-7496(96)88482-X ↗
18. Plasma-treatment of Polyetheretherketone (PEEK) for adhesive bonding10.1016/0143-7496(96)89798-3 ↗
19. Autohesion of plasma modified semi-crystallinc PEEK: Comparative study of argon nitrogen and oxygen treatments10.1016/j.colsurfa.2010.11.013 ↗
20. Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints10.1016/j.ijadhadh.2010.02.007 ↗
21. Surface analysis of chemically-etched and plasma-modified polyetheretherketone(PEEK) for biomedical applications10.1016/S0257-8972(97)00179-5 ↗
22. Experimental investigation into the effect of adhesion properties of PEEK modified by atmospheric pressure plasma and low pressure plasma10.1002/app.31880 ↗
23. Surface modification of Poly(aryl ether ether ketone) film by remote oxygen plasma10.1002/(SICI)1097-4628(19980411)68:2<271::AID-APP9>3.0.CO;2-N ↗
24. Quantification of surface oxides on carbonaceous materials10.1021/cm051462k ↗
25. A high-resolution X-ray photoelectron spectroscopy study of trifluoroacetic anhydride labelling of hydroxyl groups: Demonstration of the beta shift due to –OC(O)CF310.1016/0032-3861(93)90418-A ↗
26. Ring opening of aromatic polymers by remote atomospheric-pressure plasm10.1109/TPS.2009.2014769 ↗
27. Ultraviolet light takes on CPI role
28. Effects of irradiation and condensation on poly(ether-ether-ketone)/carbon fiber composites from nano- to macro-scale10.1177/0954008316689600 ↗