journal article·2023-03-17Open access

Chemical and Structural Assessment of New Dental Composites with Graphene Exposed to Staining Agents

Marioara Moldovan, Diana Dudea, Stanca Cuc, Codruta Sarosi, Doina Prodan, Ioan Petean, Gabriel Furtos, Andrei Ionescu, Nicoleta Ilie

Abstract

Among the newest trends in dental composites is the use of graphene oxide (GO) nanoparticles to assure better cohesion of the composite and superior properties. Our research used GO to enhance several hydroxyapatite (HA) nanofiller distribution and cohesion in three experimental composites CC, GS, GZ exposed to coffee and red wine staining environments. The presence of silane A-174 on the filler surface was evidenced by FT-IR spectroscopy. Experimental composites were characterized through color stability after 30 days of staining in red wine and coffee, sorption and solubility in distilled water and artificial saliva. Surface properties were measured by optical profilometry and scanning electron microscopy, respectively, and antibacterial properties wer e assessed against Staphylococcus aureus and Escherichia coli. A colour stability test revealed the best results for GS, followed by GZ, with less stability for CC. Topographical and morphological aspects revealed a synergism between GZ sample nanofiller components that conducted to the lower surface roughness, with less in the GS sample. However, surface roughness variation due to the stain was affected less than colour stability at the macroscopic level. Antibacterial testing revealed good effect against Staphylococcus aureus and a moderate effect against Escherichia coli.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Scientific and Engineering Research Topics · Graphene and Nanomaterials Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

“Raluca Ripan” Institute of Research in Chemistry, “Babes Bolyai” University, 30 Fantanele Street, 400294 Cluj-Napoca, Romania

Department of Prosthetic Dentistry and Dental Materials, Iuliu Hatieganu University of Medicine and Pharmacy, 400006 Cluj-Napoca, Romania

Faculty of Chemistry and Chemical Engineering, “Babes-Bolyai” University, 11 Arany Janos Street, 400084 Cluj-Napoca, Romania

Oral Microbiology and Biomaterials Laboratory, Department of Biomedical, Surgical and Dental Sciences, Università Degli Studi di Milano, Via Pascal 36, 20133 Milano, Italy

Department of Conservative Dentistry and Periodontology, University Hospital, Ludwig-Maximilians-University, Goethestr. 70, 80336 Munich, Germany

References (49)

Show source-provided references
1. Chokaree, P., Poovarodom, P., Chaijareenont, P., Yavirach, A., and Rungsiyakull, P. (2022). Biomaterials and Clinical Applications of Customized Healing Abutment—A Narrative Review. J. Funct. Biomater., 13.10.3390/jfb13040291 ↗
2. Curing potential and color stability of different resin-based luting materials10.1016/j.dental.2020.07.003 ↗
3. Toma, F.R., Porojan, S.D., Vasiliu, R.D., and Porojan, L. (2023). The Effect of Polishing, Glazing, and Aging on Optical Characteristics of Multi-Layered Dental Zirconia with Different Degrees of Translucency. J. Funct. Biomater., 14.10.3390/jfb14020068 ↗
4. Fan, K.-C., Lin, Y.-L., Tsao, H.-W., Chen, H., Lee, S.-Y., Cheng, Y.-C., Huang, H.-P., and Lin, W.-C. (2022). In Vivo Evaluation of the Effects of Sintering Temperature on the Optical Properties of Dental Glass-Ceramics. Nanomaterials, 12.10.3390/nano12132187 ↗
5. Highly translucent dental resin composites through refractive index adaption using zirconium dioxide nanoparticles and organic functionalization10.1016/j.dental.2020.07.005 ↗
6. Influence of filler characteristics on the performance of dental composites: A comprehensive review10.1016/j.ceramint.2022.06.314 ↗
7. Li, Q., and Coleman, N.J. (2019). Impact of Bi2O3 and ZrO2 Radiopacifiers on the Early Hydration and C–S–H Gel Structure of White Portland Cement. J. Funct. Biomater., 10.10.3390/jfb10040046 ↗
8. Cai, M., Ratnayake, J., Cathro, P., Gould, M., and Ali, A. (2022). Investigation of a Novel Injectable Chitosan Oligosaccharide—Bovine Hydroxyapatite Hybrid Dental Biocomposite for the Purposes of Conservative Pulp Therapy. Nanomaterials, 12.10.3390/nano12213925 ↗
9. Badr, C., Spagnuolo, G., Amenta, F., Khairallah, C., Mahdi, S.S., Daher, E., Battineni, G., Baba, N.Z., Zogheib, T., and Qasim, S.S.B. (2021). A Two-Year Comparative Evaluation of Clinical Performance of a Nanohybrid Composite Resin to a Flowable Composite Resin. J. Funct. Biomater., 12.10.3390/jfb12030051 ↗
10. De Kuijper, M.C.F.M., Cune, M.S., Özcan, M., and Gresnigt, M.M. (2021). Clinical performance of direct composite resin versus indirect restorations on endodontically treated posterior teeth: A systematic review and meta-analysis. J. Prosthet. Dent., Corrected Proof.10.1016/j.prosdent.2021.11.009 ↗
11. Effects of Acidic Beverages on Color Stability of Bulk-Fill Composites with Different Viscosities
12. The effect of red wine on colour stability of three different types of esthetic restorative materials: An in vitro study10.4103/JCD.JCD_293_17 ↗
13. Recent Advances in Dental Composites: An Overview10.37983/IJDM.2019.1202 ↗
14. Dimitrova, M., Chuchulska, B., Zlatev, S., and Kazakova, R. (2022). Colour Stability of 3D-Printed and Prefabricated Denture Teeth after Immersion in Different Colouring Agents—An In Vitro Study. Polymers, 14.10.3390/polym14153125 ↗
15. Voina, C., Delean, A., Muresan, A., Valeanu, M., Moldovan, A.M., Popescu, V., Petean, I., Ene, R., Moldovan, M., and Pandrea, S. (2020). Antimicrobial Activity and the Effect of Green Tea Experimental Gels on Teeth Surfaces. Coatings, 10.10.3390/coatings10060537 ↗
16. Comparison of color stability of a composite resin in different color media
17. Alnassar, T.M. (2022). Color Stability of Monolithic Zirconia in Various Staining Liquids: An In Vitro Study. Appl. Sci., 12.10.3390/app12199752 ↗
18. Spectroscopic examination of enamel staining by coffee indicates dentin erosion by sequestration of elements10.1016/j.talanta.2018.07.032 ↗
19. Rikihisa, N., Watanabe, S., Saito, Y., and Sakai, H. (2017). Artificial Red Blood Cells as Potential Photosensitizers in Dye Laser Treatment Against Port-Wine Stains. J. Funct. Biomater., 8.10.3390/jfb8020014 ↗
20. Minute, F., Giotto, F., Filipe-Ribeiro, L., Cosme, F., and Nunes, F.M. (2021). Alternative Methods for Measuring the Susceptibility of White Wines to Pinking Alteration: Derivative Spectroscopy and CIEL*a*b* Colour Analysis. Foods, 10.10.3390/foods10030553 ↗
21. Paolone, G., Mandurino, M., De Palma, F., Mazzitelli, C., Scotti, N., Breschi, L., Gherlone, E., Cantatore, G., and Vichi, A. (2023). Color Stability of Polymer-Based Composite CAD/CAM Blocks: A Systematic Review. Polymers, 15.10.3390/polym15020464 ↗
22. Lee, W.-F., Takahashi, H., Huang, S.-Y., Zhang, J.-Z., Teng, N.-C., and Peng, P.-W. (2022). Effects of At-Home and In-Office Bleaching Agents on the Color Recovery of Esthetic CAD-CAM Restorations after Red Wine Immersion. Polymers, 14.10.3390/polym14183891 ↗
23. The Study of Nanosized Silicate-Substituted Hydroxyapatites Co-Doped with Sr2+ and Zn2+ Ions Related to Their Influence on Biological Activities10.3390/cimb44120425 ↗
24. Padmanabhan, S.K., Nitti, P., Stanca, E., Rochira, A., Siculella, L., Raucci, M.G., Madaghiele, M., Licciulli, A., and Demitri, C. (2021). Mechanical and Biological Properties of Magnesium- and Silicon-Substituted Hydroxyapatite Scaffolds. Materials, 14.10.3390/ma14226942 ↗
25. Bie, H., Chen, H., Shan, L., Tan, C.Y., Al-Furjan, M.S.H., Ramesh, S., Gong, Y., Liu, Y.F., Zhou, R.G., and Yang, W. (2023). 3D Printing and Performance Study of Porous Artificial Bone Based on HA-ZrO2-PVA Composites. Materials, 16.10.3390/ma16031107 ↗
26. Alrahlah, A., Khan, R., Al-Odayni, A.-B., Saeed, W.S., Bautista, L.S., and Vohra, F. (2020). Evaluation of Synergic Potential of rGO/SiO2 as Hybrid Filler for BisGMA/TEGDMA Dental Composites. Polymers, 12.10.3390/polym12123025 ↗
27. Dreanca, A., Sarosi, C., Parvu, A.E., Blidaru, M., Enacrachi, G., Purdoiu, R., Nagy, A., Sevastre, B., Oros, N.A., and Marcus, I. (2020). Systemic and Local Biocompatibility Assessment of Graphene Composite Dental Materials in Experimental Mandibular Bone Defect. Materials, 13.10.3390/ma13112511 ↗
28. Ahn, J.H., Kim, I.-R., Kim, Y., Kim, D.-H., Park, S.-B., Park, B.-S., Bae, M.-K., and Kim, Y.-I. (2020). The Effect of Mesoporous Bioactive Glass Nanoparticles/Graphene Oxide Composites on the Differentiation and Mineralization of Human Dental Pulp Stem Cells. Nanomaterials, 10.10.3390/nano10040620 ↗
29. Synthesis and characterization of graphene oxide-zirconia (GO-ZrO2) and hydroxyapatite-zirconia (HA-ZrO2) nano-fillers for resin-based composites for load-bearing applications10.1016/j.jdent.2020.103557 ↗
30. Synthesis and performance of experimental resin-based dental adhesives reinforced with functionalized graphene and hydroxyapatite fillers10.1016/j.matdes.2022.110985 ↗
31. Synthesis, morpho-structural properties and antibacterial effect of silicate-based composites containing graphene oxide/hydroxyapatite10.1016/j.matchemphys.2018.06.055 ↗
32. Recent Advances and Developments in Composite Dental Restorative Materials10.1177/0022034510381263 ↗
33. Contemporary concepts on composite materials
34. Composite resin color stability: Influence of light sources and immersion media10.1590/S1678-77572011000300005 ↗
35. Color change of some aesthetic dental materials: Effect of immersion solutions and finishing of their surfaces10.1016/j.sdentj.2012.01.004 ↗
36. American National Standard (1993). American Dental Association Specification No. 27 for Resin-Based Filling Materials, American National Standard.
37. International Standards Organization ISO 4049 (2000). Dentistry-Polymer-Based Filling, Restorative and Luting Materials, International Standards Organization.
38. Paolone, G., Mazzitelli, C., Zechini, G., Scolavino, S., Goracci, C., Scotti, N., Cantatore, G., Gherlone, E., and Vichi, A. (2023). Influence of Modeling Liquids and Universal Adhesives Used as Lubricants on Color Stability and Translucency of Resin-Based Composites. Coatings, 13.10.3390/coatings13010143 ↗
39. Surface roughness and erosion of nanohybrid and nanofilled resin composites after immersion in red and white wine10.4103/0972-0707.173199 ↗
40. Al-Samadani, K.H. (2017). The Effect of Preventive Agents (Mouthwashes/Gels) on the Color Stability of Dental Resin-Based Composite Materials. Dent. J., 5.10.3390/dj5020018 ↗
41. Crăciun, A., Bȃldea, I., Ispas, A., Badea, M.E., Petean, I., Sarosi, C., Moldovan, M., Cuc, S., Ene, R., and Crişan, M. (2020). Evaluation of Surface Characteristics and Cytotoxicity of Dental Composites. Coatings, 10.10.3390/coatings10080749 ↗
42. Factors affecting polymerization of resin-based composites: A literature review10.1016/j.sdentj.2017.01.002 ↗
43. Iosif, C., Cuc, S., Prodan, D., Moldovan, M., Petean, I., Badea, M.E., Sava, S., Tonea, A., and Chifor, R. (2022). Effects of Acidic Environments on Dental Structures after Bracket Debonding. Int. J. Mol. Sci., 23.10.3390/ijms232415583 ↗
44. Iosif, C., Cuc, S., Prodan, D., Moldovan, M., Petean, I., Labunet, A., Tudoran, L.B., Badea, I.C., Man, S.C., and Badea, M.E. (2022). Mechanical Properties of Orthodontic Cements and Their Behavior in Acidic Environments. Materials, 15.10.3390/ma15227904 ↗
45. Color stability and surface roughness of polished anterior restorative materials10.4012/dmj.2014-344 ↗
46. Poggio, C., Vialba, L., Berardengo, A., Federico, R., Colombo, M., Beltrami, R., and Scribante, A. (2017). Color Stability of New Esthetic Restorative Materials: A Spectrophotometric Analysis. J. Funct. Biomater., 8.10.3390/jfb8030026 ↗
47. Staining of Hybrid Composites with Coffee, Oolong Tea, or Red Wine10.4012/dmj.25.125 ↗
48. Alzahrani, K.M., Alhaqbani, M.M., Basalem, S.A., Alsubaie, F., AlRabiah, M., Alzahrani, A., AlAali, K.A., Farooq, I., Vohra, F., and Abduljabbar, T. (2022). Effect of Staining Drinks on the Color Stability of Grit Blasted and Non-Grit Blasted Monolithic Zirconia: An In Vitro Study. Crystals, 12.10.3390/cryst12101331 ↗
49. Suriyasangpetch, S., Sivavong, P., Niyatiwatchanchai, B., Osathanon, T., Gorwong, P., Pianmee, C., and Nantanapiboon, D. (2022). Effect of Whitening Toothpaste on Surface Roughness and Colour Alteration of Artificially Extrinsic Stained Human Enamel: In Vitro Study. Dent. J., 10.10.3390/dj10100191 ↗