journal article·2023-01-28Open access

Effect of the Combination of Torsional and Tensile Stress on Corrosion Behaviors of Biodegradable WE43 Alloy in Simulated Body Fluid

Bowen Wang, Wei Gao, Chao Pan, Debao Liu, Xiaohao Sun

Abstract

The real physiological environment of the human body is complicated, with different degrees and forms of loads applied to biomedical implants caused by the daily life of the patients, which will definitely influence the degradation behaviors of Mg-based biodegradable implants. In the present study, the degradation behaviors of modified WE43 alloys under the combination of torsional and tensile stress were systematically investigated. Slow strain rate tensile tests revealed that the simulated body fluid (SBF) solution could deteriorate the ultimate tensile stress of WE43 alloy from 210.1 MPa to 169.2 MPa. In the meantime, the fracture surface of the specimens tested in the SBF showed an intergranular corrosion morphology in the marginal region, while the central area appeared not to have been affected by the corrosive media. The bio-degradation performances under the combination of torsional and tensile stressed conditions were much more severe than those under unstressed conditions or single tensile stressed situations. The combination of 40 MPa tensile and 40 MPa torsional stress resulted in a degradation rate over 20 mm/y, which was much higher than those under 80 MPa single tensile stress (4.5 mm/y) or 80 MPa single torsional stress (13.1 mm/y). The dynamic formation and destruction mechanism of the protective corrosion products film on the modified WE43 alloy could attribute to the exacerbated degradation performance and the unique corrosion morphology. The dynamic environment and multi-directional loading could severely accelerate the degradation process of modified WE43 alloy. Therefore, the SCC susceptibility derived from a single directional test may be not suitable for practical purposes. Complex external stress was necessary to simulate the in vivo environment for the development of biodegradable Mg-based implants for clinical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, China

Beijing Chunlizhengda Medical Instruments Co., Ltd., Beijing 300384, China

National Demonstration Center for Experimental Function Materials Education, Tianjin University of Technology, Tianjin 300384, China

Tianjin Key Laboratory for Photoelectric Materials and Devices, Tianjin 300384, China

Funding

National Natural Science Foundation of China · Tianjin Natural Science Foundation

References (46)

Show source-provided references
1. Investigations into stress corrosion cracking behaviour of AZ91D magnesium alloy in physiological environment10.1016/j.proeng.2011.04.087 ↗
2. Corrosion fatigue behaviors of two biomedical Mg alloys—AZ91D and WE43—In simulated body fluid10.1016/j.actbio.2010.07.026 ↗
3. Han, L., Zhang, Z., Dai, J., Li, X., Bai, J., Huang, Z., Guo, C., Xue, F., and Chu, C. (J. Magnes. Alloy, 2021). In vitro bio-corrosion behaviors of biodegradable AZ31B magnesium alloy under static stresses of different forms and magnitudes, J. Magnes. Alloy, in press.10.1016/j.jma.2021.09.018 ↗
4. The influence of alternating cyclic dynamic loads with different low frequencies on the bio-corrosion behaviors of AZ31B magnesium alloy in vitro10.1016/j.bioactmat.2021.05.049 ↗
5. Inhibiting stress corrosion cracking by removing corrosion products from the Mg-Zn-Zr alloy pre-exposed to corrosion solutions10.1016/j.actamat.2020.116570 ↗
6. Putra, R.U., Basri, H., Prakoso, A.T., Chandra, H., Ammarullah, M.I., Akbar, I., Syahrom, A., and Kamarul, T. (2023). Level of Activity Changes Increases the Fatigue Life of the Porous Magnesium Scaffold, as Observed in Dynamic Immersion Tests, over Time. Sustainability, 15.10.3390/su15010823 ↗
7. Enhancement of stress corrosion cracking of AZ31 magnesium alloy in simulated body fluid thanks to cryogenic machining10.1016/j.jmbbm.2019.103429 ↗
8. Laser additive manufacturing of biodegradable magnesium alloy WE43: A detailed microstructure analysis10.1016/j.actbio.2019.05.056 ↗
9. Biodegradable magnesium alloy (WE43) in bone-fixation plate and screw10.1002/jbm.b.34582 ↗
10. Improved biodegradable magnesium alloys through advanced solidification processing10.1016/j.scriptamat.2019.10.028 ↗
11. Mechanistic understanding of the corrosion behavior of Mg4Zn0.2Sn alloys: From the perspective view of microstructure10.1016/j.corsci.2020.108863 ↗
12. Microstructure-corrosion behaviour relationship of micro-alloyed Mg-0.5Zn alloy with the addition of Ca, Sr, Ag, In and Cu10.1016/j.matdes.2020.108980 ↗
13. A survey of bio-corrosion rates of magnesium alloys10.1016/j.corsci.2009.09.033 ↗
14. Sozańska, M., Mościcki, A., and Czujko, T. (2019). The Characterization of Stress Corrosion Cracking in the AE44 Magnesium Casting Alloy Using Quantitative Fractography Methods. Materials, 12.10.3390/ma12244125 ↗
15. Xie, Q., Ma, A., Jiang, J., Cheng, Z., Song, D., Yuan, Y., and Liu, H. (2017). Stress Corrosion Cracking Behavior of Fine-Grained AZ61 Magnesium Alloys Processed by Equal-Channel Angular Pressing. Metals, 7.10.3390/met7090343 ↗
16. Environmentally assisted cracking behavior of U-bend specimens of Mg–RE alloys in chloride containing basic solution10.1016/j.jma.2020.04.004 ↗
17. Effect of heat treatment on the stress corrosion cracking behavior of cast Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy in a 3.5 wt% NaCl salt spray environment10.1016/j.matchar.2021.111630 ↗
18. Suchy, J., Horynova, M., Klakurková, L., Palousek, D., Koutny, D., and Celko, L. (2020). Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43 via Selective Laser Melting Method. Materials, 13.10.3390/ma13112623 ↗
19. Corrosion, mechanical and biological properties of biodegradable WE43 alloy modified by Al ion implantation10.1016/j.ceramint.2022.10.056 ↗
20. Stress corrosion cracking of rare-earth containing magnesium alloys ZE41, QE22 and Elektron 21 (EV31A) compared with AZ8010.1016/j.msea.2007.07.070 ↗
21. In-vitro characterization of stress corrosion cracking of aluminium-free magnesium alloys for temporary bio-implant applications10.1016/j.msec.2014.06.018 ↗
22. Jones, R.H. (1992). ASM International, Stress-Corrosion Cracking: Materials Performance and Evaluation (USA), ASM International, Materials Park.
23. Stress corrosion cracking of EV31A in 0.1 M Na2SO4 saturated with Mg(OH)210.1016/j.jma.2018.09.001 ↗
24. (2004). Standard Practice for Laboratory Immersion Corrosion Testing of Metals (Standard No. G 31–72).
25. (2004). Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking (Standard No. G129-Y2021).
26. Biodegradable magnesium alloy WE43 porous scaffolds fabricated by laser powder bed fusion for orthopedic applications: Process optimization, in vitro and in vivo investigation10.1016/j.bioactmat.2022.02.020 ↗
27. Liu, J., Yin, B., Song, F., Liu, B., Peng, B., Wen, P., Tian, Y., Zheng, Y., Ma, X., and Wang, C. (J. Magnes. Alloy, 2022). Improving corrosion resistance of additively manufactured WE43 magnesium alloy by high temperature oxidation for biodegradable applications, J. Magnes. Alloy, in press.10.1016/j.jma.2022.08.009 ↗
28. Features of in vitro and in vivo behaviour of magnesium alloy WE4310.1016/j.matlet.2017.12.125 ↗
29. A novel biodegradable Mg–Nd–Zn–Zr alloy with uniform corrosion behavior in artificial plasma10.1016/j.matlet.2012.08.012 ↗
30. Towards refining microstructures of biodegradable magnesium alloy WE43 by spark plasma sintering10.1016/j.actbio.2019.06.045 ↗
31. Kuah, K.X., Wijesinghe, S.L., and Blackwood, D.J. (2021, January 20–23). Corrosion Characteristics of Secondary Phases in WE43 Magnesium Alloys under Various Exposure Conditions. Proceedings of the 21st International Corrosion Congress (ICC INTERCORR WCO 2021), Sao Paulo, Brazil.
32. The role of applied stress in the anodic dissolution of sulfide inclusions and pit initiation of stainless steels10.1016/j.corsci.2021.109312 ↗
33. Extrusion temperature impacts on biometallic Mg-2.0Zn-0.5Zr-3.0Gd (wt%) solid-solution alloy10.1016/j.jallcom.2017.12.225 ↗
34. Stress corrosion cracking of an extruded magnesium alloy (ZK21) in a simulated body fluid10.1016/j.engfracmech.2018.09.002 ↗
35. Biocorrosion properties of as-extruded Mg–Nd–Zn–Zr alloy compared with commercial AZ31 and WE43 alloys10.1016/j.matlet.2011.08.079 ↗
36. Effects of microstructure on the torsional properties of biodegradable WE43 Mg alloy10.1016/j.jmst.2020.04.003 ↗
37. Corrosion and stress corrosion cracking of ultra-high-purity Mg5Zn10.1016/j.corsci.2015.01.032 ↗
38. Internal stress and thermally activated dislocation motion in an AZ63 magnesium alloy10.1016/j.matchemphys.2011.08.045 ↗
39. Corrosion stress relaxation and tensile strength effects in an extruded AZ31 magnesium alloy10.1016/j.corsci.2013.12.008 ↗
40. Effect of stress corrosion cracking at various strain rates on the electrochemical corrosion behavior of Mg-Zn-In-Sn alloy10.1016/S1001-0742(14)60625-2 ↗
41. An investigation of the corrosion mechanisms of WE43 Mg alloy in a modified simulated body fluid solution: The effect of electrolyte renewal10.1016/j.corsci.2014.11.034 ↗
42. The Effect of Stress Amplitude on the cause of Fatigue Crack Initiation in a Spring Steel10.1016/0142-1123(93)90006-C ↗
43. Biocorrosion of coated Mg–Zn–Ca alloy under constant compressive stress close to that of human tibia10.1016/j.matlet.2011.12.009 ↗
44. Corrosion resistance of anodised single-phase Mg alloys10.1016/j.surfcoat.2005.11.081 ↗
45. Jamari, J., Ammarullah, M., Saad, A., Syahrom, A., Uddin, M., van der Heide, E., and Basri, H. (2021). The Effect of Bottom Profile Dimples on the Femoral Head on Wear in Metal-on-Metal Total Hip Arthroplasty. J. Funct. Biomater., 12.10.3390/jfb12020038 ↗
46. Simulation of Inter- and Transgranular Crack Propagation in Polycrystalline Aggregates Due to Stress Corrosion Cracking10.1016/j.actamat.2009.04.035 ↗