journal article·2022-10-21Open access

Influence of Ceramic Particles Size and Ratio on Surface—Volume Features of the Naturally Derived HA-Reinforced Filaments for Biomedical Applications

Aura-Cătălina Mocanu, Florin Miculescu, Cătălina-Andreea Dascălu, Ștefan Ioan Voicu, Mădălina-Andreea Pandele, Robert-Cătălin Ciocoiu, Dan Batalu, Sorina Dondea, Valentina Mitran, Lucian-Toma Ciocan

Abstract

The intersection of the bone tissue reconstruction and additive manufacturing fields promoted the advancement to a prerequisite and new feedstock resource for high-performance bone-like-scaffolds manufacturing. In this paper, the proposed strategy was directed toward the use of bovine-bone-derived hydroxyapatite (HA) for surface properties enhancement and mechanical features reinforcement of the poly(lactic acid) matrix for composite filaments extrusion. The involvement of completely naturally derived materials in the technological process was based on factors such as sustainability, low cost, and a facile and green synthesis route. After the HA isolation and extraction from bovine bones by thermal processing, milling, and sorting, two dependent parameters—the HA particles size (<40 μm, <100 μm, and >125 μm) and ratio (0–50% with increments of 10%)—were simultaneously modulated for the first time during the incorporation into the polymeric matrix. The resulting melt mixtures were divided for cast pellets and extruded filaments development. Based on the obtained samples, the study was further designed to examine several key features by complementary surface–volume characterization techniques. Hence, the scanning electron microscopy and micro-CT results for all specimens revealed a uniform and homogenous dispersion of HA particles and an adequate adhesion at the ceramic/polymer interface, without outline pores, sustained by the shape and surface features of the synthesized ceramic particles. Moreover, an enhanced wettability (contact angle in the ~70−21° range) and gradual mechanical takeover were indicated once the HA ratio increased, independent of the particles size, which confirmed the benefits and feasibility of evenly blending the natural ceramic/polymeric components. The results correlation led to the selection of optimal technological parameters for the synthesis of adequate composite filaments destined for future additive manufacturing and biomedical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallic Materials Science, Physical Metallurgy, Faculty of Materials Science and Engineering, University Politehnica of Bucharest, 313 Splaiul Independentei, J Building, 060042 Bucharest, Romania

Department of Analytical Chemistry and Environmental Engineering, Faculty of Applied Chemistry and Materials Science, University Politehnica of Bucharest, 1-7 Gh. Polizu Str., 011061 Bucharest, Romania

Advanced Polymer Materials Group, University Politehnica of Bucharest, 1-7 Gh. Polizu Str., 011061 Bucharest, Romania

Department of Biochemistry and Molecular Biology, University of Bucharest, 91-95 Spl. Independentei, 050095 Bucharest, Romania

Prosthetics Technology and Dental Materials Department, “Carol Davila” University of Medicine and Pharmacy, 37 Dionisie Lupu Street., 020022 Bucharest, Romania

Funding

Romanian National Authority for Scientific Research and Innovation

References (64)

Show source-provided references
1. Review on particle emissions during fused deposition modeling of acrylonitrile butadiene styrene and polylactic acid polymers10.1016/j.matpr.2020.11.521 ↗
2. 3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration10.1088/1748-605X/ab388d ↗
3. Polylactic acid: Synthesis and biomedical applications10.1111/jam.14290 ↗
4. Mocanu, A.-C., Stan, G.E., Maidaniuc, A., Miculescu, M., Antoniac, I.V., Ciocoiu, R.-C., Voicu, I., Mitran, V., Cîmpean, A., and Miculescu, F. (2019). Naturally-Derived Biphasic Calcium Phosphates through Increased Phosphorus-Based Reagent Amounts for Biomedical Applications. Materials, 12.10.3390/ma12030381 ↗
5. Vladescu, A., Badea, M., Padmanabhan, S.C., Paraschiv, G., Floroian, L., Gaman, L., Morris, M.A., Marty, J.-L., and Cotrut, C.M. (2019). Nanomaterials for Medical Applications and Their Antimicrobial Advantages. Materials for Biomedical Engineering, Elsevier.10.1016/B978-0-12-818435-6.00015-3 ↗
6. Comparative Studies Regarding Heavy Elements Concentration In Human Cortical Bone
7. Preparation and in vitro evaluation of PLA/biphasic calcium phosphate filaments used for fused deposition modelling of scaffolds10.1016/j.msec.2020.111013 ↗
8. 3D printing and morphological characterisation of polymeric composite scaffolds10.1016/j.engstruct.2020.110752 ↗
9. Influence of deposition temperature on the properties of hydroxyapatite obtained by electrochemical assisted deposition10.1016/j.ceramint.2017.09.227 ↗
10. Pandele, A.M., Andronescu, C., Ghebaur, A., Garea, S.A., and Iovu, H. (2019). New Biocompatible Mesoporous Silica/Polysaccharide Hybrid Materials as Possible Drug Delivery Systems. Materials, 12.10.3390/ma12010015 ↗
11. Dascalu, C.-A., Miculescu, F., Mocanu, A.-C., Constantinescu, A.E., Butte, T.M., Pandele, A.M., Ciocoiu, R.-C., Voicu, S.I., and Ciocan, L.T. (2020). Novel Synthesis of Core-Shell Biomaterials from Polymeric Filaments with a Bioceramic Coating for Biomedical Applications. Coatings, 10.10.3390/coatings10030283 ↗
12. Synthesis and Characterization of Jellified Composites from Bovine Bone-Derived Hydroxyapatite and Starch as Precursors for Robocasting10.1021/acsomega.7b01855 ↗
13. Comparative physical, chemical and biological assessment of simple and titanium-doped ovine dentine-derived hydroxyapatite coatings fabricated by pulsed laser deposition10.1016/j.apsusc.2017.04.025 ↗
14. Bioreactivity evaluation in simulated body fluid of magnetron sputtered glass and glass-ceramic coatings: A ftir spectroscopy study
15. Bioglass implant-coating interactions in synthetic physiological fluids with varying degrees of biomimicry10.2147/IJN.S123236 ↗
16. Induced wettability and surface-volume correlation of composition for bovine bone derived hydroxyapatite particles10.1016/j.apsusc.2017.07.074 ↗
17. Effect of micron sized silver particles concentration on the adhesion induced by sintering and antibacterial properties of hydroxyapatite microcomposites10.1080/01694243.2016.1163808 ↗
18. Internal and external surface features of newly developed porous ceramics with random interconnected 3D channels by a fibrous sacrificial porogen method10.1016/j.apsusc.2019.05.354 ↗
19. Comprehensive analysis of compatible natural fibre as sacrificial porogen template for tailored ceramic 3D bioproducts destined for hard tissue reconstruction10.1016/j.ceramint.2020.10.113 ↗
20. Development and characterization of printable PLA/β-TCP bioactive composites for bone tissue applications10.1002/app.49759 ↗
21. 3D printed polymer–mineral composite biomaterials for bone tissue engineering: Fabrication and characterization10.1002/jbm.b.34348 ↗
22. Printability of materials for extrusion 3D printing technologies: A review of material requirements and testin10.3989/mc.2021.11821 ↗
23. A review of fabrication polymer scaffolds for biomedical applications using additive manufacturing techniques10.1016/j.bbe.2020.01.015 ↗
24. Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling10.1016/j.ceramint.2018.07.297 ↗
25. 3D printed bone tissue regenerative PLA/HA scaffolds with comprehensive performance optimizations10.1016/j.matdes.2021.109490 ↗
26. Characterization of a composite polylactic acid-hydroxyapatite 3D-printing filament for bone-regeneration10.1088/2057-1976/ab73f8 ↗
27. Applications of PLA in modern medicine
28. Material issues in additive manufacturing: A review10.1016/j.jmapro.2016.11.006 ↗
29. Impact modified PLA-hydroxyapatite composites—Thermo-mechanical properties10.1016/j.compositesa.2018.01.017 ↗
30. New concept of 3D printed bone clip (polylactic acid/hydroxyapatite/silk composite) for internal fixation of bone fractures10.1080/09205063.2017.1384199 ↗
31. Fabrication of 3D-printed bone scaffold of natural hydroxyapatite from fish bones in polylactic acid composite10.1063/5.0001497 ↗
32. Calcium phosphate-PLA scaffolds fabricated by fused deposition modeling technique for bone tissue applications: Fabrication, characterization and simulation10.1016/j.ceramint.2019.09.238 ↗
33. Manufacturing and characterization of poly(lactic acid) composites with hydroxyapatite10.1177/0892705717729014 ↗
34. Powder Loading Effects on the Physicochemical and Mechanical Properties of 3D Printed Poly Lactic Acid/Hydroxyapatite Biocomposites10.18063/ijb.v7i1.326 ↗
35. Experimental researches on biomaterial-tissue interface interactions
36. (2017). Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves (Standard No. ASTM E11-20).
37. Pandele, A.M., Constantinescu, A., Radu, I.C., Miculescu, F., Ioan Voicu, S., and Ciocan, L.T. (2020). Synthesis and Characterization of PLA-Micro-Structured Hydroxyapatite Composite Films. Materials, 13.10.3390/ma13020274 ↗
38. Jia, S., Yu, D., Zhu, Y., Wang, Z., Chen, L., and Fu, L. (2017). Morphology, Crystallization and Thermal Behaviors of PLA-Based Composites: Wonderful Effects of Hybrid GO/PEG via Dynamic Impregnating. Polymers, 9.10.3390/polym9100528 ↗
39. Investigation of crystalline structure of plasticized poly (lactic acid)/Banana nanofibers composites10.1088/1757-899X/369/1/012031 ↗
40. Research on the changes in wettability of rice (Oryza sativa.) leaf surfaces at different development stages using the OWRK method10.1002/ps.3594 ↗
41. Experimental Investigations for Optimizing the Extrusion Parameters on FDM PLA Printed Parts10.1007/s11665-018-3784-x ↗
42. Miculescu, F., Luță, C., Constantinescu, A.E., Maidaniuc, A., Mocanu, A.-C., Miculescu, M., Voicu, Ș.I., and Ciocan, L.T. (2020). Considerations and Influencing Parameters in EDS Microanalysis of Biogenic Hydroxyapatite. J. Funct. Biomater., 11.10.3390/jfb11040082 ↗
43. Effect of heating process on micro structure level of cortical bone prepared for compositional analysis
44. A study on the influence of the primary electron beam on nanodimensional layers analysis
45. Melt Spinning of Poly(lactic acid) and Hydroxyapatite Composite Fibers: Influence of the Filler Content on the Fiber Properties10.1021/am401895f ↗
46. The influence of hydroxyapatite (HA) microparticles (m) and nanoparticles (n) on the thermal and dynamic mechanical properties of poly-l-lactide10.1016/j.polymer.2011.04.028 ↗
47. Effects of Inorganic Fillers on the Thermal and Mechanical Properties of Poly(lactic acid)10.1155/2014/827028 ↗
48. Surface free energy predominates in cell adhesion to hydroxyapatite through wettability10.1016/j.msec.2016.01.037 ↗
49. Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants10.1016/j.biotechadv.2011.06.004 ↗
50. Parreidt, T.S., Schmid, M., and Hauser, C. (2017). Validation of a Novel Technique and Evaluation of the Surface Free Energy of Food. Foods, 6.10.3390/foods6040031 ↗
51. Terpiłowski, K., Hołysz, L., Chodkowski, M., and Guinarte, D.C. (2021). What Can You Learn about Apparent Surface Free Energy from the Hysteresis Approach?. Colloids Interfaces, 5.10.3390/colloids5010004 ↗
52. Evaluation of the surface free energy of plant surfaces: Toward standardizing the procedure
53. Surface microstructuring to modify wettability for 3D printing of nano-filled inks10.1016/j.cherd.2016.02.004 ↗
54. Correlation of proliferation, morphology and biological responses of fibroblasts on LDPE with different surface wettability10.1163/156856207780852514 ↗
55. Stan, G.E., Tite, T., Popa, A.-C., Chirica, I.M., Negrila, C.C., Besleaga, C., Zgura, I., Sergentu, A.C., Popescu-Pelin, G., and Cristea, D. (2020). The Beneficial Mechanical and Biological Outcomes of Thin Copper-Gallium Doped Silica-Rich Bio-Active Glass Implant-Type Coatings. Coatings, 10.10.3390/coatings10111119 ↗
56. Scaffolds for bone tissue engineering: Role of surface patterning on osteoblast response10.1039/c3ra23315d ↗
57. In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale10.1007/s11340-016-0197-3 ↗
58. On the Use of X-ray Computed Tomography in Assessment of 3D-Printed Components10.1007/s10921-020-00721-1 ↗
59. Applications of X-ray computed tomography for the evaluation of biomaterial-mediated bone regeneration in critical-sized defects10.1111/jmi.12844 ↗
60. Micro- and nano-X-ray computed-tomography: A step forward in the characterization of the pore network of a leached cement paste10.1016/j.cemconres.2014.08.007 ↗
61. Targeted Gold Nanoparticles Enable Molecular CT Imaging of Cancer10.1021/nl8029114 ↗
62. Rheological, mechanical and physical properties of poly-lactic acid (PLA)/hydroxyapatites (HA) composites prepared by an injection moulding process10.24191/jmeche.v19i2.19669 ↗
63. Textured and hierarchically structured calcium phosphate ceramic blocks through hydrothermal treatment10.1016/j.biomaterials.2015.07.026 ↗
64. Influence of the modulated two-step synthesis of biogenic hydroxyapatite on biomimetic products’ surface10.1016/j.apsusc.2017.07.144 ↗