journal article·2022-03-07Open access

Surface Properties of Ti6Al7Nb Alloy: Surface Free Energy and Bacteria Adhesion

Monika Krzywicka, Jolanta Szymańska, Szymon Tofil, Anna Malm, Agnieszka Grzegorczyk

Abstract

The laser micro-machining was carried out on a station equipped with a TruMicro 5325c laser emitting ultraviolet radiation (343 nm wavelength) in picosecond pulses. On the surface of the Ti6Al7Nb alloy, dimple texturing with a constant diameter of ~200 μm, different depths (from ~5 to ~78 μm) and density (from 10% to 50%) were produced. The value of surface free energy was determined with the Owens–Wendt method using two measuring liquids: distilled water and diodomethane. The Staphylococcus epidermidis strain was used to test the adhesion of bacteria. It was found that the surface free energy value is influenced by both of the texture parameters (density, depth). The density also affects the potential for biofilm formation. Based on the analysis, it was shown that with an increase in surface free energy, the number of adhering microorganisms increases exponentially. Moreover, the study shows that there is a correlation between the number of adhering microorganisms and surface free energy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Technology Fundamentals, University of Life Sciences, 20-612 Lublin, Poland

Department of Comprehensive Pediatric and Adult Dentistry, Medical University of Lublin, 20-059 Lublin, Poland

Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, 25-314 Kielce, Poland

Chair and Department of Pharmaceutical Microbiology with Laboratory for Microbiological Diagnostics, Medical University of Lublin, 20-093 Lublin, Poland

Funding

Part of the statutory activity of the Medical University of Lublin, Poland

References (47)

Show source-provided references
1. Surface free energy and bacterial retention to saliva-coated dental implant materials—An in vitro study10.1016/j.colsurfb.2004.08.002 ↗
2. Surface modification of titanium, titanium alloys and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
3. Titanium alloys in total joint replacement—A materials science perspective10.1016/S0142-9612(97)00146-4 ↗
4. Local effect of titanium implant corrosion, an experimental study in rats10.1016/j.ijom.2008.05.013 ↗
5. Laser surface textured titanium alloy (Ti-6Al-4V): Part 1—Surface characterization10.1016/j.apsusc.2015.06.175 ↗
6. Laser surface texturing of titanium for bioengineering applications10.1016/j.promfg.2017.09.102 ↗
7. Enhancing the antibacterial performance of orthopaedic implant materials by fibre laser surface engineering10.1016/j.apsusc.2017.01.233 ↗
8. Production of hybrid macro/micro/nano surface structures on Ti6Al4V surfaces by picosecond laser surface texturing and their antifouling characteristics10.1016/j.colsurfb.2017.10.008 ↗
9. Surface texturing and control of bacterial adhesion. Reference module in materials science and materials engineering
10. Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces10.1016/j.apsusc.2012.11.085 ↗
11. Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation10.1016/j.apsusc.2015.10.102 ↗
12. Mechanical seals with sliding surface texture—Model fluid flow and some aspects of the laser forming of the texture10.1016/j.proeng.2012.07.007 ↗
13. Femtosecond laser fabricated spike structures for selective control of cellular behaviour10.1177/0885328209345553 ↗
14. Texturing of titanium (Ti6Al4V) medical implant surfaces with MHz-repetition-rate femtosecond and picosecond Yb-doped fiber lasers
15. An in vivo study of bone response to implants topographically modified by laser micromachining10.1016/S0142-9612(02)00266-1 ↗
16. Hydroxyapatite thin film coatings on nanotube-formed Ti-35Nb-10Zr alloys after femtosecond laser texturing10.1016/j.surfcoat.2012.11.066 ↗
17. Femtosecond laser structuring of titanium implants10.1016/j.apsusc.2007.03.006 ↗
18. Modifications of roughness and wettability properties of metals induced by femtosecond laser treatment
19. Wetting behaviour of laser synthetic surface microtextures on Ti-6Al-4V for bioapplication10.1098/rsta.2010.0003 ↗
20. Novel laser surface texturing for improved primary stability of titanium implants10.1016/j.jmbbm.2019.04.052 ↗
21. Laser surface texturing inhibits biofilm formation10.1016/j.matchemphys.2021.124909 ↗
22. Laser micro & nano surface texturing for enhancing osseointegration and antimicrobial effect of biomaterials: A review10.1016/j.matpr.2020.12.433 ↗
23. Modelling the interaction between bacterial cells and laser-textured surfaces10.1016/j.surfcoat.2019.06.078 ↗
24. Krzywicka, M., Antoszewski, B., Pałka, K., and Tofil, S. (2018, January 12–14). Ti6Al7Nb alloy laser micromachining-surface properties. Proceedings of the 2018 Conference on Electrotechnology: Processes, Models, Control and Computer Science, Kielce, Poland.10.1109/EPMCCS.2018.8596530 ↗
25. Surface properties and bacterial behavior of micro conical dimple textured Ti6Al4V surface through micro-milling10.1016/j.surfin.2020.100714 ↗
26. Effects of laser-textured surface pattern on the wetting behavior and composition optimization of brazing filler: Experimental study and numerical simulation10.1007/s00339-019-3174-8 ↗
27. Texturing surface—Topography and surface energy
28. Effect of micro- and nanoscale topography on the adhesion of bacterial cells to solid surfaces10.1128/AEM.03436-12 ↗
29. Bacterial retention on superhydrophobic titanium surfaces fabricated by femtosecond laser ablation10.1021/la104607g ↗
30. Increasing the wear resistance of hip prosthesis by laser surface microtexturing of the femoral head
31. Towards laser-textured antibacterial surfaces10.1038/s41598-018-28454-2 ↗
32. A review on fundamentals, constraints and fabrication techniques of superhydrophobic coatings10.1016/j.porgcoat.2020.105557 ↗
33. Dynamic clustering in suspension of motile bacteria10.1209/0295-5075/111/54002 ↗
34. Wettability transition for laser textured surfaces: A comprehensive review10.1016/j.surfin.2020.100802 ↗
35. Surface characteristics of orthodontic adhesives and effects on streptococcal adhesion10.1016/j.ajodo.2008.05.015 ↗
36. Surface properties of Ti-6Al-4V alloy part I: Surface roughness and apparent surface free energy10.1016/j.msec.2016.08.080 ↗
37. Evaluation of metallic and polymeric biomaterial surface energy and surface roughness characteristics for directed cell adhesion10.1089/107632700300003297 ↗
38. The use of contact angle and the surface free energy as the surface characteristics of the polymers used in medicine
39. Surface free energy effect on bacterial retention10.1016/j.colsurfb.2006.02.004 ↗
40. Effect of material characteristics and/or surface topography on biofilm develop-ment10.1111/j.1600-0501.2006.01353.x ↗
41. The influence of surface roughness and surface-free energy on supra-and subgin-gival plaque formation in man: A review of the literature10.1111/j.1600-051X.1995.tb01765.x ↗
42. Effects of surface properties of polymer-based restorative materials on early adhesion of Streptococcus mutans in vitro10.1016/j.jdent.2016.07.010 ↗
43. Air-directed attachment of coccoid bacteria to the surface of superhydrophobic lotus-like titanium10.1080/08927014.2012.694426 ↗
44. Staphylococcal biofilm growth on smooth and porous titanium coatings for biomedical applications10.1002/jbm.a.34688 ↗
45. Direct laser interference patterning of stainless steel by ultrashort pulses for antibacterial surfaces10.1016/j.optlastec.2019.105954 ↗
46. Influence of ns laser texturing of AISI 316L surfaces for reducing bacterial adhesion10.1016/j.cirp.2020.04.003 ↗
47. Direct femtosecond laser surface nano/microstructuring and its applications10.1002/lpor.201200017 ↗