journal article·2022-11-01Open access

Wire Arc Additive Manufacturing of Zinc as a Degradable Metallic Biomaterial

Rishabh Soni, Suyog Jhavar, Suhela Tyeb, Saurabh Kumar Gupta, Satyam Suwas, Kaushik Chatterjee

Abstract

Wire arc additive manufacturing (WAAM) offers a high rate of material deposition among various additive manufacturing techniques with wire as feedstock material but has not been established for zinc alloys. Zn alloys can be used as degradable biomaterials, in contrast to conventional permanent metallic biomaterials. In this work, commercially pure Zn was processed by WAAM to obtain near-dense parts, and the properties obtained through WAAM-processed Zn were compared with wrought (WR) Zn samples. The microstructure and hardness values of the WAAM (41 ± 1 HV0.3) components were found to be similar to those of the WR (35 ± 2 HV0.3) components. Bulk X-ray diffraction texture measurements suggested that WAAM builds exhibit a heavily textured microstructure compared to the WR counterparts, with peak intensities around <3 3–6 2> or <0 0 0 2> in the directions parallel to the build direction (BD). The corrosion rates in simulated body fluid (SBF) were similar for WAAM (0.45 mmpy) and WR (0.3 mmpy) samples. The weight loss measurements in SBF were found to be marginally higher in the WAAM samples compared to the WR counterparts for a duration of up to 21 days. MC3T3-E1 preosteoblasts were found to be healthy and proliferating in the culture medium containing the degradation products from WAAM-Zn in a manner similar to WR-Zn. This work establishes the feasibility of processing Zn by WAAM for use in bioresorbable metallic implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering, Indian Institute of Science, Sir C. V. Raman Avenue, Bangalore 560012, India

School of Mechanical Engineering, VIT-AP University, Inavolu, Beside AP Secretariat Amaravati, Amaravati 522237, India

Funding

Science and Engineering Research Board (SERB) of the Government of India

References (37)

Show source-provided references
1. Pelvic Instability: A Consequence of Removing Iliac Bone for Grafting10.2106/00004623-197254010-00008 ↗
2. Morbidity at Bone Graft Donor Sites10.1097/00005131-198909000-00002 ↗
3. Bioresorbable Metals for Biomedical Applications: From Mechanical Components to Electronic Devices10.1002/adhm.202002236 ↗
4. Biodegradable Metals10.1016/j.mser.2014.01.001 ↗
5. Biodegradable Mg Alloys for Orthopedic Implants—A Review10.1016/j.jma.2021.06.024 ↗
6. Long-Term Biocompatibility of a Corrodible Peripheral Iron Stent in the Porcine Descending Aorta10.1016/j.biomaterials.2006.05.029 ↗
7. A Novel Approach to Temporary Stenting: Degradable Cardiovascular Stents Produced from Corrodible Metal-Results 6–18 Months after Implantation into New Zealand White Rabbits10.1136/heart.86.5.563 ↗
8. Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents10.1002/adma.201300226 ↗
9. Levy, G.K., Goldman, J., and Aghion, E. (2017). The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper. Metals, 7.10.3390/met7100402 ↗
10. Corrosion Behaviour of Biodegradable Magnesium Alloys with Hydroxyapatite Coatings10.1016/j.surfcoat.2016.01.045 ↗
11. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges10.1016/j.compositesb.2018.02.012 ↗
12. Micro-Plasma Transferred Arc Additive Manufacturing for Die and Mold Surface Remanufacturing10.1007/s11837-016-1932-z ↗
13. Salmi, M. (2021). Additive Manufacturing Processes in Medical Applications. Materials, 14.10.3390/ma14010191 ↗
14. Jhavar, S. (2021). Wire Arc Additive Manufacturing: Approaches and Future Prospects. Additive Manufacturing, Woodhead Publishing.10.1016/B978-0-12-822056-6.00004-7 ↗
15. Laser Additive Manufacturing of Zinc Targeting for Biomedical Application10.18063/ijb.v8i1.501 ↗
16. Selective Laser Melting of Pure Zn with High Density for Biodegradable Implant Manufacturing
17. A Combined Strategy to Enhance the Properties of Zn by Laser Rapid Solidification and Laser Alloying10.1016/j.jmbbm.2018.03.018 ↗
18. Densification Behavior of Pure Zn Metal Parts Produced by Selective Laser Melting for Manufacturing Biodegradable Implants10.1016/j.jmatprotec.2018.03.007 ↗
19. Laser Additive Manufacturing of Zn Metal Parts for Biodegradable Applications: Processing, Formation Quality and Mechanical Properties10.1016/j.matdes.2018.05.057 ↗
20. Formation Quality, Mechanical Properties, and Processing Behavior of Pure Zinc Parts Produced by Laser-Based Manufacturing for Biodegradable Implants10.1007/s00501-019-0829-x ↗
21. Additively Manufactured Biodegradable Porous Zinc10.1016/j.actbio.2019.10.034 ↗
22. Additively Manufactured Functionally Graded Biodegradable Porous Zinc10.1039/C9BM01904A ↗
23. Corrosion Fatigue Behavior of Additively Manufactured Biodegradable Porous Zinc10.1016/j.actbio.2020.02.001 ↗
24. Effect of Grain Structure on the Mechanical Properties and in Vitro Corrosion Behavior of Additively Manufactured Pure Zn
25. Mechanical Properties and Cytocompatibility of Dense and Porous Zn Produced by Laser Powder Bed Fusion for Biodegradable Implant Applications10.1016/j.actbio.2020.04.006 ↗
26. Plasma Metal Deposition of Stainless Steel 316L over Mild Steel Surface10.1016/j.matpr.2021.01.529 ↗
27. Beausir, B., and Fundenberger, J.-J. (2017). Analysis Tools for Electron and X-ray Diffraction, ATEX-Software.
28. Study of the Influence of Zr on the Mechanical Properties and Functional Response of Ti-Nb-Ta-Zr-O Alloy for Orthopedic Applications10.1016/j.matdes.2018.107555 ↗
29. Light-Based 3D Bioprinting of Bone Tissue Scaffolds with Tunable Mechanical Properties and Architecture from Photocurable Silk Fibroin10.1016/j.ijbiomac.2022.01.081 ↗
30. Additive Manufacturing of Magnesium Alloys
31. Effect of Processing Parameters on Microstructure and Tensile Properties of Austenitic Stainless Steel 304L Made by Directed Energy Deposition Additive Manufacturing10.1016/j.actamat.2016.03.019 ↗
32. Evolution of Solidification Texture during Additive Manufacturing10.1038/srep16446 ↗
33. The Control of Crystallographic Texture in the Use of Magnesium as a Resorbable Biomaterial10.1039/C4RA08484E ↗
34. The Importance of Crystallographic Texture in the Use of Titanium as an Orthopedic Biomaterial10.1039/C4RA05440G ↗
35. Microhardness Measurements and the Hall-Petch Relationship in an Al-Mg Alloy with Submicrometer Grain Size10.1016/1359-6454(96)00105-X ↗
36. Bormann, T., Mai, P.T., Gibmeier, J., Sonntag, R., Müller, U., and Kretzer, J.P. (2020). Corrosion Behavior of Surface-Treated Metallic Implant Materials. Materials, 13.10.3390/ma13092011 ↗
37. Zinc and Cerium Synergistically Enhance the Mechanical Properties, Corrosion Resistance, and Osteogenic Activity of Magnesium as Resorbable Biomaterials10.1088/1748-605X/ac0453 ↗