Show source-provided references
1. Im-plant-supported immediately loaded fixed full-arch dentures: Evaluation of implant survival rates in a case cohort of up to 7 years
10.1111/cid.12421 ↗2. Long term clinical performance of 10 871 dental im-plants with up to 22 years of follow-up: A cohort study in 4247 patients
10.1111/cid.12994 ↗3. Comparison of peri-implant and periodontal marginal soft tis-sues in health and disease
10.1111/prd.12150 ↗4. Effects of modified abutment characteristics on peri-implant soft tissue health: A systematic re-view and meta-analysis
5. Lauritano, D., Moreo, G., Lucchese, A., Viganoni, C., Limongelli, L., and Carinci, F. (2020). The Impact of Implant–Abutment Connection on Clinical Outcomes and Microbial Colonization: A Narrative Review. Materials, 13.
10.3390/ma13051131 ↗6. Implant-abutment gap versus microbial colonization: Clinical significance based on a literature review
10.1002/jbm.b.32945 ↗7. Bacterial Colonization of the Implant-Abutment Interface (IAI) of Dental Implants with a Sloped Marginal Design: An in-vitro Study
10.1111/cid.12287 ↗8. Evaluation of sealing between abutment and inner connection of cone morse dental implant: Microgaps between implant and abutment
9. In Vitro Microbiological Analysis of Bacterial Seal at the Implant-Abutment Interface Using Two Morse Taper Implant Models
10.1590/0103-6440201302178 ↗10. Association between implant-abutment microgap and implant circularity to bacterial leakage: An in vitro study using tapered connection implants
10.11607/jomi.5836 ↗11. Microgap and Micromotion at the Implant Abutment Interface Cause Marginal Bone Loss Around Dental Implant but More Evidence is Needed
10.1016/j.jebdp.2018.03.009 ↗13. Behavior of implant and abutment sets of three different connections during the non-axial load application: An in vitro experimental study using a radiographic method
10.3233/BME-211221 ↗14. Correlation between Micromotion and Gap Formation at the Implant-Abutment Interface
10.11607/ijp.5086 ↗15. Misfit of Three Different Implant-Abutment Connections Before and After Cyclic Load Application: An In Vitro Study
10.11607/jomi.5629 ↗16. Influence of different implant-abutment connection designs on the mechanical and biological behavior of single-tooth implants in the maxillary esthetic zone: A systematic review
10.1016/j.prosdent.2018.05.007 ↗17. Load fatigue performance of conical implant-abutment connection: Effect of torque level and interface junction
18. Equicrestal and Subcrestal Dental Implants: A Histologic and Histomorphometric Evaluation of Nine Retrieved Human Implants
10.1902/jop.2010.100450 ↗20. Effect of internal hexagonal index on removal torque and tensile removal force of different Morse taper connection abutments
10.1016/j.prosdent.2016.07.024 ↗21. The influence of implant-abutment connection to peri-implant bone loss: A systematic review and meta-analysis
10.1111/cid.12620 ↗22. Clinical and radiographic performance of self-locking conical connection implants in the posterior mandible: Five-year results of a two-centre prospective study
10.1111/clr.13794 ↗25. Investigation of the Type of Angled Abutment for Anterior Maxillary Implants: A Finite Element Analysis
10.1111/jopr.13462 ↗26. Clinical, Technical, and Radiologic Outcomes of 182 Implant-Supported Zirconia Single Crowns Using Titanium-Base Abutments: A Retrospective Study
10.11607/ijp.7796 ↗27. Evaluation of the ITI Morse taper implant/abutment design with an internal modification
29. Reverse torque evaluation in indexed and nonindexed abutments of Morse Taper implants in a mechanical fatigue test
10.4103/1735-3327.250967 ↗31. Network meta-analysis of survival rate and complications in implant-supported single crowns with different abutment materials
10.1016/j.jdent.2019.04.007 ↗32. Stock Versus CAD/CAM Customized Zirconia Implant Abutments—Clinical and Patient-Based Outcomes in a Randomized Controlled Clinical Trial
10.1111/cid.12440 ↗33. Jamari, J., Ammarullah, M.I., Santoso, G., Sugiharto, S., Supriyono, T., and van der Heide, E. (2022). In Silico Contact Pressure of Metal-on-Metal Total Hip Implant with Different Materials Subjected to Gait Loading. Metals, 12.
10.3390/met12081241 ↗34. Mellado-Valero, A., Muñoz, A., Pina, V., and Sola-Ruiz, M. (2018). Electrochemical Behaviour and Galvanic Effects of Titanium Implants Coupled to Metallic Suprastructures in Artificial Saliva. Materials, 11.
10.3390/ma11010171 ↗37. Molinero-Mourelle, P., Cascos-Sanchez, R., Yilmaz, B., Lam, W., Pow, E., Highsmith, J.D.R., and Gómez-Polo, M. (2021). Effect of Fabrication Technique on the Microgap of CAD/CAM Cobalt–Chrome and Zirconia Abutments on a Conical Connection Implant: An In Vitro Study. Materials, 14.
10.3390/ma14092348 ↗38. Microleakage assessment of CAD-CAM Cobalt-Chrome and Zirconia abutments on a conical connection dental implant: A comparative in vitro study
10.1111/clr.13973 ↗40. Bone remodeling around dental implants after 1–1.5 years of functional loading: A retrospective analysis of two-stage implants
10.1002/cre2.574 ↗41. Pan, Y.H., Lin, H.K., Lin, J.C.-Y., Hsu, Y.-S., Wu, Y.-F., Salamanca, E., and Chang, W.-J. (2019). Evaluation of the Peri-Implant Bone Level around Platform-Switched Dental Implants: A Retrospective 3-Year Radiographic Study. Int. J. Environ. Res. Public Heal., 16.
10.3390/ijerph16142570 ↗42. Biological width establishment around dental implants is influenced by abutment height irrespective of vertical mucosal thickness: A cluster randomized controlled trial
10.1111/clr.13450 ↗43. The Effect of Age, Gender, and Insertion Site on Marginal Bone Loss around Endosseous Implants: Results from a 3-Year Trial with Premium Implant System
10.1155/2014/369051 ↗44. Clinical and radiographic evaluations of implants as surveyed crowns for Class I removable partial dentures: A retrospective study
10.4047/jap.2022.14.2.108 ↗45. A Retrospective Analysis on Marginal Bone Loss around Tilted and Axial Implants in Immediate-Loaded All-On-4 with a Long-Term Follow-Up Evaluation
10.3390/prosthesis4010002 ↗46. The effect of implant placement torque on crestal bone remodeling after 1 year of loading
10.2147/CCIDE.S174895 ↗47. Effects of insertion torque values on the marginal bone loss of dental implants installed in sheep mandibles
10.1038/s41598-021-04313-5 ↗48. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla
10.3389/fphys.2014.00029 ↗50. Lombardi, T., Berton, F., Salgarello, S., Barbalonga, E., Rapani, A., Piovesana, F., Gregorio, C., Barbati, G., Di Lenarda, R., and Stacchi, C. (2019). Factors Influencing Early Marginal Bone Loss around Dental Implants Positioned Subcrestally: A Multicenter Prospective Clinical Study. J. Clin. Med., 8.
10.3390/jcm8081168 ↗51. Ibrahim, A., and Chrcanovic, B.R. (2021). Dental Implants Inserted in Fresh Extraction Sockets versus Healed Sites: A Systematic Review and Meta-Analysis. Materials, 14.
10.3390/ma14247903 ↗54. Immediate Loading of Single Implants: A 2-Year Prospective Multicenter Study
10.11607/prd.2986 ↗55. Immediate Provisionalization of Dental Implants Placed in Healed Alveolar Ridges and Extraction Sockets: A 5-year Prospective Evaluation
10.11607/jomi.3617 ↗56. Early marginal bone loss around dental implants to define success in implant dentistry: A retrospective study
10.1111/cid.13122 ↗58. Influence of abutment height and implant depth position on interproximal peri-implant bone in sites with thin mucosa: A 1-year randomized clinical trial
10.1111/clr.13443 ↗61. Influence of buccal emergence profile designs on pe-ri-implant tissues: A randomized controlled trial
10.1111/cid.13088 ↗62. Implant-abutment emergence angle and profile in relation to peri-implantitis: A systematic review
10.1002/cre2.594 ↗63. Gehrke, S.A., Bercianos, M., Aguerrondo, J.G., Calvo-Guirado, J.L., and Prados-Frutos, J.C. (2019). Influence of Mucosal Thickness, Implant Dimensions and Stability in Cone Morse Implant Installed at Subcrestal Bone Level on the Peri-Implant Bone: A Prospective Clinical and Radiographic Study. Symmetry, 11.
10.3390/sym11091138 ↗66. Evaluation of marginal bone loss around SLActive implants by CBCT using different implant dimensions and surgical approaches: A clinical and radiological prospective study
68. Desai, S.R., Koulgikar, K.D., Alqhtani, N.R., Alqahtani, A.R., Alqahtani, A.S., Alenazi, A., Heboyan, A., Fernandes, G.V.O., and Mustafa, M. (2023). Three-Dimensional FEA Analysis of the Stress Distribution on Titanium and Graphene Frameworks Supported by 3 or 6-Implant Models. Biomimetics, 8.
10.3390/biomimetics8010015 ↗