Physical/Mechanical and Antibacterial Properties of Orthodontic Adhesives Containing Calcium Phosphate and Nisin
Source abstract
Abstract
Enamel demineralization around orthodontic adhesive is a common esthetic concern during orthodontic treatment. The aim of this study was to prepare orthodontic adhesives containing monocalcium phosphate monohydrate (MCPM) and nisin to enable mineralizing and antibacterial actions. The physicomechanical properties and the inhibition of S. mutans growth of the adhesives with added MCPM (5, 10 wt %) and nisin (5, 10 wt %) were examined. Transbond XT (Trans) was used as the commercial comparison. The adhesive containing a low level of MCPM showed significantly higher monomer conversion (42–62%) than Trans (38%) (p < 0.05). Materials with additives showed lower monomer conversion (p < 0.05), biaxial flexural strength (p < 0.05), and shear bond strength to enamel than those of a control. Additives increased water sorption and solubility of the experimental materials. The addition of MCPM encouraged Ca and P ion release, and the precipitation of calcium phosphate at the bonding interface. The growth of S. mutans in all the groups was comparable (p > 0.05). In conclusion, experimental orthodontic adhesives with additives showed comparable conversion but lesser mechanical properties than the commercial material. The materials showed no antibacterial action, but exhibited ion release and calcium phosphate precipitation. These properties may promote remineralization of the demineralized enamel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Orthodontics and Dentofacial Orthopedics · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Orthodontics, Faculty of Dentistry, Thammasat University, Pathum Thani 12120, Thailand
Division of Oral Biology, Faculty of Dentistry, Thammasat University, Pathum Thani 12120, Thailand
Division of Restorative Dentistry, Thammasat University, Pathum Thani 12120, Thailand
Thammasat University Research Unit in Dental and Bone Substitute Biomaterials, Thammasat University, Pathum Thani 12120, Thailand
Funding
Faculty of Dentistry, Thammasat University
References (82)
Show source-provided references
1. Fluoride varnish for white spot lesion prevention during orthodontic treatment: Results of a randomized controlled trial 1 year after debonding10.1093/ejo/cjaa055 ↗
2. Quantification of White Spot Lesions around Orthodontic Brackets with Image Analysis10.2319/0003-3219(2008)078[0585:QOWSLA]2.0.CO;2 ↗
3. Effectiveness of an indirect bonding technique in reducing plaque accumulation around braces10.2319/041811-273.1 ↗
4. Enamel demineralization around two different orthodontic bracket adhesive systems: An in vivo study10.1016/j.sdentj.2018.11.005 ↗
5. Evaluation of a newly developed calcium fluoride nanoparticles-containing orthodontic primer: An in-vitro study10.1016/j.jmbbm.2021.104691 ↗
6. Fluoride containing bioactive glass composite for orthodontic adhesives—Apatite formation properties10.1016/j.dental.2018.04.009 ↗
7. Antibacterial and remineralizing orthodontic adhesive containing quaternary ammonium resin monomer and amorphous calcium phosphate nanoparticles10.1016/j.jdent.2018.03.004 ↗
8. In-situ Raman spectroscopy of amorphous calcium phosphate to crystalline hydroxyapatite transformation10.1016/j.mex.2018.09.015 ↗
9. Kangwankai, K., Sani, S., Panpisut, P., Xia, W., Ashley, P., Petridis, H., and Young, A.M. (2017). Monomer conversion, dimensional stability, strength, modulus, surface apatite precipitation and wear of novel, reactive calcium phosphate and polylysine-containing dental composites. PLoS ONE, 12.10.1371/journal.pone.0187757 ↗
10. Panpisut, P., Khan, M.A., Main, K., Arshad, M., Xia, W., Petridis, H., and Young, A.M. (2019). Polymerization kinetics stability, volumetric changes, apatite precipitation, strontium release and fatigue of novel bone composites for vertebroplasty. PLoS ONE, 14.10.1371/journal.pone.0207965 ↗
11. Panpisut, P., Liaqat, S., Zacharaki, E., Xia, W., Petridis, H., and Young, A.M. (2016). Dental composites with calcium/strontium phosphates and polylysine. PLoS ONE, 11.10.1371/journal.pone.0164653 ↗
12. Monomer conversion, biaxial flexural strength, apatite forming ability of experimental dual-cured and self-adhesive dental composites containing calcium phosphate and nisin10.4012/dmj.2020-056 ↗
13. Development of dental composites with reactive fillers that promote precipitation of antibacterial-hydroxyapatite layers10.1016/j.msec.2015.11.047 ↗
14. Dorozhkin, S.V. (2019). Calcium orthophosphates as a dental regenerative material. Advanced Dental Biomaterials, Elsevier.10.1016/B978-0-08-102476-8.00016-5 ↗
15. Conversion, shrinkage, water sorption, flexural strength and modulus of re-mineralizing dental composites10.1016/j.dental.2015.08.149 ↗
16. Analysis of Chlorhexidine Modified Cement in Orthodontic Patients: A Double-Blinded, Randomized, Controlled Trial10.1055/s-0041-1727556 ↗
17. Chlorhexidine Allergy: On the Rise and Often Overlooked10.1007/s11882-019-0858-2 ↗
18. Allergy to Chlorhexidine10.12968/denu.2016.43.3.272 ↗
19. Saleem, H.G., Seers, C.A., Sabri, A.N., and Reynolds, E.C. (2016). Dental plaque bacteria with reduced susceptibility to chlorhexidine are multidrug resistant. BMC Microbiol., 16.10.1186/s12866-016-0833-1 ↗
20. Resistance Toward Chlorhexidine in Oral Bacteria—Is There Cause for Concern?10.3389/fmicb.2019.00587 ↗
21. Incorporation and antimicrobial activity of nisin Z within carrageenan/chitosan multilayers10.1038/s41598-020-79702-3 ↗
22. Mechanisms of nisin resistance in Gram-positive bacteria10.1007/s13213-013-0679-9 ↗
23. Lipid-II Independent Antimicrobial Mechanism of Nisin Depends on Its Crowding and Degree of Oligomerization10.1038/srep37908 ↗
24. A universal adhesive incorporating antimicrobial peptide nisin: Effects on Streptococcus mutans and saliva-derived multispecies biofilms10.1007/s10266-019-00478-8 ↗
25. Antibacterial effect and bond strength of a modified dental adhesive containing the peptide nisin10.1016/j.peptides.2017.10.003 ↗
26. Delgado, A.H.S., and Young, A.M. (2021). Methacrylate peak determination and selection recommendations using ATR-FTIR to investigate polymerisation of dental methacrylate mixtures. PLoS ONE, 16.10.1371/journal.pone.0252999 ↗
27. British Standard (2019). BS EN ISO 4049:2019. Dentistry-Polymer-Based Restorative Materials, BSI Standards Limited.
28. British Standard (2015). PD ISO/TS 11405:2015. Dentistry-Testing of Adhesion to Tooth Structure, BSI Standards Limited.
29. Thepveera, W., Potiprapanpong, W., Toneluck, A., Channasanon, S., Khamsuk, C., Monmaturapoj, N., Tanodekaew, S., and Panpisut, P. (2021). Rheological Properties, Surface Microhardness, and Dentin Shear Bond Strength of Resin-Modified Glass Ionomer Cements Containing Methacrylate-Functionalized Polyacids and Spherical Pre-Reacted Glass Fillers. J. Funct. Biomater., 12.10.3390/jfb12030042 ↗
30. Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment10.1016/0002-9416(84)90190-8 ↗
31. Shear bond strength of a flash-free orthodontic adhesive system after thermal aging procedure
32. Potiprapanpong, W., Thepveera, W., Khamsuk, C., Channasanon, S., Tanodekaew, S., Patntirapong, S., Monmaturapoj, N., and Panpisut, P. (2021). Monomer Conversion, Dimensional Stability, Biaxial Flexural Strength, Ion Release, and Cytotoxicity of Resin-Modified Glass Ionomer Cements Containing Methacrylate-Functionalized Polyacids and Spherical Pre-Reacted Glass Fillers. Polymers, 13.10.3390/polym13162742 ↗
33. Lygidakis, N.N., Allan, E., Xia, W., Ashley, P.F., and Young, A.M. (2020). Early Polylysine Release from Dental Composites and Its Effects on Planktonic Streptococcus mutans Growth. J. Funct. Biomater., 11.10.3390/jfb11030053 ↗
34. Ferreira, C.J., Leitune, V.C.B., Balbinot, G.S., Degrazia, F.W., Arakelyan, M., Sauro, S., and Mezzomo Collares, F. (2019). Antibacterial and Remineralizing Fillers in Experimental Orthodontic Adhesives. Materials, 12.10.3390/ma12040652 ↗
35. Monomer conversion, dimensional stability, biaxial flexural strength, and fluoride release of resin-based restorative material containing alkaline fillers10.4012/dmj.2019-020 ↗
36. Long-term elution of monomers from resin-based dental composites10.1016/j.dental.2019.01.005 ↗
37. Cytotoxicity evaluation of dental and orthodontic light-cured composite resins10.1002/cre2.337 ↗
38. Assessing the estrogenic activity of chemicals present in resin based dental composites and in leachates of commercially available composites using the ERalpha-CALUX bioassay10.1016/j.dental.2021.09.013 ↗
39. Effect of Bisphenol A Glycol Methacrylate on Virulent Properties of Streptococcus mutans UA15910.1159/000490197 ↗
40. Kim, K., Kim, J.N., Lim, B.S., and Ahn, S.J. (2021). Urethane Dimethacrylate Influences the Cariogenic Properties of Streptococcus Mutans. Materials, 14.10.3390/ma14041015 ↗
41. Structural and mechanical analysis of three orthodontic adhesive composites cured with different light units
42. Degree of conversion and in vitro temperature rise of pulp chamber during polymerization of flowable and sculptable conventional, bulk-fill and short-fibre reinforced resin composites10.1016/j.dental.2021.02.013 ↗
43. Poly(propylene glycol) and urethane dimethacrylates improve conversion of dental composites and reveal complexity of cytocompatibility testing10.1016/j.dental.2015.11.017 ↗
44. Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins10.1016/S0142-9612(01)00308-8 ↗
45. Refractive index mismatch and monomer reactivity influence composite curing depth10.1177/154405910808700115 ↗
46. Effect of base monomer’s refractive index on curing depth and polymerization conversion of photo-cured resin composites10.4012/dmj.24.403 ↗
47. Kumar, N., Ghani, F., Fareed, M.A., Riaz, S., Khurshid, Z., and Zafar, M.S. (2021). Bi-axial flexural strength of resin based dental composites—Influence and reliability of the testing method configuration. Mater. Technol., 1–7.10.1080/10667857.2021.1886664 ↗
48. Academy of dental materials guidance—Resin composites: Part I—Mechanical properties10.1016/j.dental.2017.04.013 ↗
49. Miura, D., Ishida, Y., Miyasaka, T., Aoki, H., and Shinya, A. (2020). Reliability of Different Bending Test Methods for Dental Press Ceramics. Materials, 13.10.3390/ma13225162 ↗
50. Structure-properties relationships in dental adhesives: Effect of initiator, matrix monomer structure, and nano-filler incorporation10.1016/j.dental.2018.05.013 ↗
51. Evaluation of physico-mechanical properties and filler particles characterization of conventional, bulk-fill, and bioactive resin-based composites10.1016/j.jmbbm.2020.104288 ↗
52. Odermatt, R., Mohn, D., Wiedemeier, D.B., Attin, T., and Tauböck, T.T. (2020). Bioactivity and physico-chemical properties of dental composites functionalized with nano-vs. micro-sized bioactive glass. J. Clin. Med., 9.10.3390/jcm9030772 ↗
53. Mechanical properties of experimental composites containing bioactive glass after artificial aging in water and ethanol10.1007/s00784-018-2713-6 ↗
54. Mechanical characterization and ion release of bioactive dental composites containing calcium phosphate particles10.1016/j.jmbbm.2018.05.022 ↗
55. Dental glass-reinforced composite for caries inhibition: Calcium phosphate ion release and mechanical properties10.1002/jbm.b.31519 ↗
56. Calcium orthophosphates (CaPO4): Occurrence and properties10.1007/s40204-015-0045-z ↗
57. Hygroscopic and hydrolytic effects in dental polymer networks10.1016/j.dental.2005.05.005 ↗
58. Calcium phosphates as ion-releasing fill.lers in restorative resin-based materials10.1016/j.dental.2018.08.288 ↗
59. High strength re-mineralizing, antibacterial dental composites with reactive calcium phosphates10.1016/j.dental.2013.01.010 ↗
60. Effective Expansion: Balance between Shrinkage and Hygroscopic Expansion10.1177/0022034516633450 ↗
61. Sokolowski, K., Szczesio-Wlodarczyk, A., Bociong, K., Krasowski, M., Fronczek-Wojciechowska, M., Domarecka, M., Sokolowski, J., and Lukomska-Szymanska, M. (2018). Contraction and Hydroscopic Expansion Stress of Dental Ion-Releasing Polymeric Materials. Polymers, 10.10.3390/polym10101093 ↗
62. Ester-free thiol–ene dental restoratives—Part A: Resin development10.1016/j.dental.2015.08.148 ↗
63. A review of direct orthodontic bonding10.1080/0301228X.1975.11743666 ↗
64. Factors Affecting the Shear Bond Strength of Orthodontic Brackets—A Review of In Vitro Studies
65. Orthodontic Bracket Bonding Using Self-adhesive Cement to Facilitate Bracket Debonding
66. Eslamian, L., Borzabadi-Farahani, A., Karimi, S., Saadat, S., and Badiee, M.R. (2020). Evaluation of the Shear Bond Strength and Antibacterial Activity of Orthodontic Adhesive Containing Silver Nanoparticle, an In-Vitro Study. Nanomaterials, 10.10.3390/nano10081466 ↗
67. In vitro analysis of shear bond strength and adhesive remnant index of different metal brackets10.1590/2177-6709.21.6.067-073.oar ↗
68. A comparison of shear bond strength of orthodontic brackets bonded with four different orthodontic adhesives10.4103/2278-0203.132892 ↗
69. Effect of time on shear bond strength of four orthodontic adhesive systems
70. Biomimetic remineralization of human dentin using promising innovative calcium-silicate hybrid “smart” materials10.1016/j.dental.2011.07.007 ↗
71. A review of bioceramics-based dental restorative materials10.4012/dmj.2018-039 ↗
72. A nano-CaF2-containing orthodontic cement with antibacterial and remineralization capabilities to combat enamel white spot lesions10.1016/j.jdent.2019.07.010 ↗
73. Solubility properties of human tooth mineral and pathogenesis of dental caries10.1111/j.1601-0825.2004.01030.x ↗
74. Wanitwisutchai, T., Monmaturapoj, N., Srisatjaluk, R., Subannajui, K., Dechkunakorn, S., Anuwongnukroh, N., and Pongprueksa, P. (2021). Buffering capacity and antibacterial properties among bioactive glass-containing orthodontic adhesives. Dent. Mater. J., 2020–2375.10.4012/dmj.2020-375 ↗
75. Cieplik, F., Rupp, C.M., Hirsch, S., Muehler, D., Enax, J., Meyer, F., Hiller, K.-A., and Buchalla, W. (2020). Ca2+ release and buffering effects of synthetic hydroxyapatite following bacterial acid challenge. BMC Oral Health, 20.10.1186/s12903-020-01080-z ↗
76. Development of remineralizing, antibacterial dental materials10.1016/j.actbio.2009.03.030 ↗
77. Bacterial colonization associated with fixed orthodontic appliances. A scanning electron microscopy study10.1093/ejo/23.5.475 ↗
78. Condò, R., Mampieri, G., Pasquantonio, G., Giancotti, A., Pirelli, P., Cataldi, M.E., La Rocca, S., Leggeri, A., Notargiacomo, A., and Maiolo, L. (2021). In vitro evaluation of structural factors favouring bacterial adhesion on orthodontic adhesive resins. J. Mater. Sci., 14.10.20944/preprints202103.0322.v1 ↗
79. Hadj-Hamou, R., Senok, A.C., Athanasiou, A.E., and Kaklamanos, E.G. (2020). Do probiotics promote oral health during orthodontic treatment with fixed appliances? A systematic review. BMC Oral Health, 20.10.1186/s12903-020-01109-3 ↗
80. Nardi, G.M., Fais, S., Casu, C., Mazur, M., Di Giorgio, R., Grassi, R., Grassi, F.R., and Orru, G. (2020). Mouthwash Based on Ozonated Olive Oil in Caries Prevention: A Preliminary In-Vitro Study. Int J. Environ. Res. Public Health, 17.10.3390/ijerph17239106 ↗
81. Efficacy of antimicrobial agents incorporated in orthodontic bonding systems: A systematic review and meta-analysis10.1080/14653125.2018.1443872 ↗
82. Antimicrobial nisin acts against saliva derived multi-species biofilms without cytotoxicity to human oral cells10.3389/fmicb.2015.00617 ↗