journal article·2023-07-12Open access

Unveiling the Potential of Rice Straw Nanofiber-Reinforced HDPE for Biomedical Applications: Investigating Mechanical and Tribological Characteristics

Mohamed Taha, Ahmed Fouly, Hany S. Abdo, Ibrahim A. Alnaser, Ragab Abouzeid, Ahmed Nabhan

Abstract

The efficient utilization of rice waste has the potential to significantly contribute to environmental sustainability by minimizing the waste impact on the environment. Through repurposing such waste, novel materials can be developed for various biomedical applications. This approach not only mitigates waste, but it also promotes the adoption of sustainable materials within the industry. In this research, rice-straw-derived nanofibers (RSNFs) were utilized as a reinforcement material for high-density polyethylene (HDPE). The rice-straw-derived nanofibers were incorporated at different concentrations (1, 2, 3, and 4 wt.%) into the HDPE. The composites were fabricated using twin-screw extrusion (to ensure homogenous distribution) and the injection-molding process (to crease the test samples). Then, the mechanical strengths and frictional performances of the bio-composites were assessed. Different characterization techniques were utilized to investigate the morphology of the RSNFs. Thermal analyses (TGA/DTG/DSC), the contact angle, and XRD were utilized to study the performances of the HDPE/RSNF composites. The study findings demonstrated that the addition of RSNFs as a reinforcement to the HDPE improved the hydrophilicity, strength, hardness, and wear resistance of the proposed bio-composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, College of Engineering and Technology, Arab Academy for Science, Technology and Maritime Transport, Sadat Road, Aswan 81511, Egypt

Mechanical Engineering Department, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia

Center of Excellence for Research in Engineering Materials (CEREM), King Saud University, Riyadh 11421, Saudi Arabia

School of Renewable Natural Resources, Louisiana State University AgCenter, Baton Rouge, LA 70803, USA

Department of Production Engineering and Mechanical Design, Faculty of Engineering, Minia University, Minia 61519, Egypt

Funding

King Saud University

References (50)

Show source-provided references
1. Sydow, Z., Sydow, M., Wojciechowski, Ł., and Bieńczak, K. (2021). Tribological performance of composites reinforced with the agricultural, industrial and post-consumer wastes: A review. Materials, 14.10.3390/ma14081863 ↗
2. Study on structure and thermal stability properties of cellulose fibers from rice straw10.1016/j.carbpol.2011.02.022 ↗
3. Effect of xylanase pretreatment of rice straw unbleached soda and neutral sulfite pulps on isolation of nanofibers and their properties10.1007/s10570-018-1779-2 ↗
4. Evaluation of eco-friendly cellulose and lignocellulose nanofibers from rice straw using Multiple Quality Index
5. Tribological and Mechanical Properties of HDPE Reinforced by Al2O3 Nanoparticles for Bearing Materials
6. UHMWPE for biomedical applications: Performance and functionalization10.1016/j.eurpolymj.2020.109529 ↗
7. Dowson, D. (2023, July 09). The History of Tribology in America. Available online: https://asmedigitalcollection.asme.org/tribology/article-abstract/103/3/323/411403/The-History-of-Tribology-in-America?redirectedFrom=fulltext.10.1115/1.3251664 ↗
8. Biotribology of artificial hip joints10.5312/wjo.v6.i1.77 ↗
9. Polyester composite based on betelnut fibre for tribological applications10.1016/j.triboint.2009.08.006 ↗
10. Tribomechanical and Surface Topographical Investigations of Poly Methyl Methacrylate-Seashell Particle based Biocomposite10.1016/j.mspro.2014.07.436 ↗
11. Mechanical and Tribological Characteristics of PMMA Reinforced by Natural Materials
12. Improved Tribological Properties of Poly (methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment10.1007/s11665-022-06638-2 ↗
13. Wear resistance of polymethyl methacrylate (PMMA) with the addition of bone ash, hydroxylapatite and keratin10.1088/1757-899X/295/1/012004 ↗
14. Effect of Low Content of Al2O3 Nanoparticles on the Mechanical and Tribological Properties of Polymethyl Methacrylate as a Denture Base Material
15. Influence of adding nano graphene and hybrid SiO2-TiO2 nano particles on tribological characteristics of polymethyl methacrylate (PMMA)
16. Filler loading effect of Al2O3/TiO2 nanoparticles on physical and mechanical characteristics of dental base composite (PMMA)10.1016/j.polymertesting.2022.107848 ↗
17. Incorporation of graphene nanoplatelets/hydroxyapatite in PMMA bone cement for characterization and enhanced mechanical properties of biopolymer composites10.1177/08927057221086833 ↗
18. Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite10.1177/08853282221085633 ↗
19. Tribocorrosion behavior of 316 L and HDPE composites for orthopedic application10.1016/j.mtcomm.2022.103582 ↗
20. Potential of kenaf fibres as reinforcement for tribological applications10.1016/j.wear.2009.06.002 ↗
21. Tribological characteristics comparison for oil palm fibre/epoxy and kenaf fibre/epoxy composites under dry sliding conditions10.1016/j.triboint.2016.04.020 ↗
22. Effect of Filler Loading on Erosive Characteristics of Epoxy/SiO2 Coatings
23. Adhesive wear and frictional performance of bamboo fibres reinforced epoxy composite10.1016/j.triboint.2011.10.012 ↗
24. Kulkarni, D., Musale, S., Panzade, P., Paiva-Santos, A.C., Sonwane, P., Madibone, M., Choundhe, P., Giram, P., and Cavalu, S. (2022). Surface functionalization of nanofibers: The multifaceted approach for advanced biomedical applications. Nanomaterials, 12.10.3390/nano12213899 ↗
25. Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites10.1016/j.wear.2006.01.039 ↗
26. Browning, B.L. (1967). Methods of Wood Chemistry. Volumes I & II, John Wiley & Sons.
27. Surface modification of cellulose nanofibers with alkenyl succinic anhydride for high-density polyethylene reinforcement10.1016/j.compositesa.2015.11.009 ↗
28. Improving cellulose/polypropylene nanocomposites properties with chemical modified bagasse nanofibers and maleated polypropylene10.1177/0731684413509292 ↗
29. Patnaik, P. (2004). Dean’s Analytical Chemistry Handbook, McGraw-Hill Education.
30. Nanofibers from bagasse and rice straw: Process optimization and properties10.1007/s00226-010-0373-z ↗
31. Lengowski, E.C., de Muñiz, G.I.B., de Andrade, A.S., Simon, L.C., and Nisgoski, S. (2018). Caracterização morfológica, física e térmica de celuloses microfibriladas. Rev. Árvore, 42, Available online: https://www.scielo.br/j/rarv/a/W6gmFfKNWSGxhzz5kt6pCDR/?format=pdf&lang=en.10.1590/1806-90882018000100013 ↗
32. Sjostrom, E. (1993). Wood Chemistry: Fundamentals and Applications, Gulf Professional Publishing.
33. Strong interactions during lignin pyrolysis in wood–a study by in situ probing of the radical chain reactions using model dimers10.1016/j.jaap.2015.04.009 ↗
34. Hierarchical structural engineering of ultrahigh-molecular-weight polyethylene10.1021/acsami.0c15615 ↗
35. Trends in the production of cellulose nanofibers from non-wood sources10.1007/s10570-019-02828-9 ↗
36. Sustainable one-pot process for the production of cellulose nanofiber and polyethylene/cellulose nanofiber composites10.1016/j.jclepro.2018.09.266 ↗
37. In-situ production of polyethylene/cellulose nanocrystal composites10.1002/cjce.22608 ↗
38. Surface and interface engineering for nanocellulosic advanced materials10.1002/adma.202002264 ↗
39. Cellulose and lignocellulose nanofibril suspensions and films: A comparison10.1016/j.carbpol.2020.117011 ↗
40. Correction: Overview of sterilization methods for UHMWPE through surface analysis10.1039/D0MA90045A ↗
41. Coupling effect of starch coated fibers for recycled polymer/wood composites10.1016/j.compositesb.2019.05.052 ↗
42. A technique engineered for improving thermal conductive properties of polyamide-6 composites via hydroxylated boron nitride masterbatch-based melt blending10.1016/j.compositesb.2021.108716 ↗
43. Melt processing of cellulose nanocrystal reinforced polycarbonate from a masterbatch process10.1016/j.eurpolymj.2015.06.007 ↗
44. Nanocrystalline cellulose improves the biocompatibility and reduces the wear debris of ultrahigh molecular weight polyethylene via weak binding10.1021/acsnano.5b04393 ↗
45. Tribological performance of brake friction materials containing carbon nanotubes10.1016/j.wear.2009.09.003 ↗
46. Microstructural, mechanical, and thermal characteristics of recycled cellulose fiber-halloysite-epoxy hybrid nanocomposites10.1002/pc.22163 ↗
47. Sharip, N.S., Ariffin, H., Yasim-Anuar, T.A.T., Andou, Y., Shirosaki, Y., Jawaid, M., Tahir, P.M., and Ibrahim, N.A. (2021). Melt-vs. non-melt blending of complexly processable ultra-high molecular weight polyethylene/cellulose nanofiber bionanocomposite. Polymers, 13.10.3390/polym13030404 ↗
48. UHMWPE Modified by Halogenating Reagents: Study on the Improvement of Hydrophilicity and Tribological Properties10.1080/10402004.2021.1895390 ↗
49. Hydroxypropyl cellulose/rice straw oxidized cellulose nanocrystals nanocomposites and their use in paper coating10.1016/j.indcrop.2016.02.026 ↗
50. In-situ fabrication of a UHMWPE nanocomposite reinforced by SiO2 nanospheres and its tribological performance10.1016/j.matchemphys.2019.121778 ↗