journal article·2022-04-11Open access

Microbial Adhesion to Dental Polymers for Conventional, Computer-Aided Subtractive and Additive Manufacturing: A Comparative In Vitro Study

Sergey Arutyunov, Levon Kirakosyan, Lubov Dubova, Yaser Kharakh, Nikolay Malginov, Gadzhi Akhmedov, Viktor Tsarev

Abstract

Modern structural materials are represented by a variety of polymer materials used for dental patients’ rehabilitation. They differ not only in physico-chemical properties, but also in microbiological properties, which is one of the reasons why these materials are chosen. The study focused on the microbial adhesion of clinical isolates of normal (5 types), periodontopathogenic (2 types), and fungal (2 types) microbiotas to various materials based on polymethylmethacrylate (PMMA) intended for traditional (cold-cured and hot-cured polymers), computer-aided subtractive and additive manufacturing. A comparative analysis was carried out on the studied samples of polymer materials according to the microorganisms’ adhesion index (AI). The lowest level of microorganisms’ AI of the three types of microbiotas was determined in relation to materials for additive manufacturing. The AI of hot-cured polymers, as well as materials for subtractive manufacturing, corresponded to the average level. The highest level of microorganisms’ adhesion was found in cold-cured polymers. Significant differences in AI for materials of the same technological production type (different manufacturers) were also determined. The tendency of significant differences in the indicators of the microorganisms’ adhesion level for the studied polymer materials on the basis of the type of production technology was determined.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Endodontics and Root Canal Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Propaedeutics of Dental Diseases Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia

Orthopedic Dentistry Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia

Prosthodontics Technology Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia

Surgical Dentistry Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia

Microbiology, Virology, Immunology Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia

References (44)

Show source-provided references
1. Long-term reinforced fixed provisional restorations10.1016/S0022-3913(98)70078-2 ↗
2. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: Report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics10.1016/S0022-3913(03)00259-2 ↗
3. Tribst, J.P.M., Campanelli de Morais, D., Melo de Matos, J.D., Lopes, G.d.R.S., Dal Piva, A.M.d.O., Souto Borges, A.L., Bottino, M.A., Lanzotti, A., Martorelli, M., and Ausiello, P. (2022). Influence of Framework Material and Posterior Implant Angulation in Full-Arch All-on-4 Implant-Supported Prosthesis Stress Concentration. Dent. J., 10.10.3390/dj10010012 ↗
4. Mechanical behavior of conceptual posterior dental crowns with functional elasticity gradient
5. Quantification and identification of bacteria in acrylic resin dentures and dento-maxillary obturator-prostheses
6. Advances in polymeric materials for dental applications10.1039/C6PY01957A ↗
7. Zafar, M.S. (2020). Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update. Polymers, 12.10.3390/polym12102299 ↗
8. Incorporation of antimicrobial agents in denture base resin: A systematic review10.1016/j.prosdent.2020.03.033 ↗
9. Explorative study on the antibacterial effects of 3D-printed PMMA/nitrides composites10.1016/j.matdes.2021.109788 ↗
10. Song, W., and Ge, S. (2019). Application of Antimicrobial Nanoparticles in Dentistry. Molecules, 24.10.3390/molecules24061033 ↗
11. The human oral microbiome10.1128/JB.00542-10 ↗
12. Lee, M.-J., Kim, M.-J., Oh, S.-H., and Kwon, J.-S. (2020). Novel Dental Poly (Methyl Methacrylate) Containing Phytoncide for Antifungal Effect and Inhibition of Oral Multispecies Biofilm. Materials, 13.10.3390/ma13020371 ↗
13. Potential pathogenic aspects of denture plaque10.1080/09674845.2007.11732784 ↗
14. Prevalence and distribution of principal periodontal pathogens worldwide10.1111/j.1600-051X.2008.01280.x ↗
15. Di Cosola, M., Cazzolla, A.P., Charitos, I.A., Ballini, A., Inchingolo, F., and Santacroce, L. (2021). Candida albicans and Oral Carcinogenesis. A Brief Review. J. Fungi, 7.10.3390/jof7060476 ↗
16. Current Aspects in the Biology, Pathogeny, and Treatment of Candida krusei, a Neglected Fungal Pathogen10.2147/IDR.S247944 ↗
17. Kinkela Devcic, M., Simonic-Kocijan, S., Prpic, J., Paskovic, I., Cabov, T., Kovac, Z., and Glazar, I. (2021). Oral Candidal Colonization in Patients with Different Prosthetic Appliances. J. Fungi, 7.10.3390/jof7080662 ↗
18. New insights into innate immune control of systemic candidiasis10.1093/mmy/myu029 ↗
19. The nephelometer: An instrument for estimating the number of bacteria in suspensions used for calculating the opsonic index and for vaccines10.1001/jama.1907.25320140022001f ↗
20. On the relative importance of specific and non-specific approaches to oral microbial adhesion10.1111/j.1574-6968.1992.tb04988.x ↗
21. Giti, R., Dabiri, S., Motamedifar, M., and Derafshi, R. (2021). Surface roughness, plaque accumulation, and cytotoxicity of provisional restorative materials fabricated by different methods. PLoS ONE, 16.10.1371/journal.pone.0249551 ↗
22. The influence of surface free energy and surface roughness on early plaque formation. An in vivo study in man10.1111/j.1600-051X.1990.tb01077.x ↗
23. A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations10.1111/jerd.12438 ↗
24. In vitro comparison of the surface roughness of polymethyl methacrylate and bis-acrylic resins for interim restorations before and after polishing10.1016/j.prosdent.2021.02.009 ↗
25. Paolone, G., Moratti, E., Goracci, C., Gherlone, E., and Vichi, A. (2020). Effect of Finishing Systems on Surface Roughness and Gloss of Full-Body Bulk-Fill Resin Composites. Materials, 13.10.3390/ma13245657 ↗
26. Arnold, C., Monsees, D., Hey, J., and Schweyen, R. (2019). Surface Quality of 3D-Printed Models as a Function of Various Printing Parameters. Materials, 12.10.3390/ma12121970 ↗
27. Effect of print layer height and printer type on the accuracy of 3-dimensional printed orthodontic models10.1016/j.ajodo.2017.06.012 ↗
28. Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations10.1016/j.prosdent.2019.05.034 ↗
29. Influence of the three-dimensional printing technique and printing layer thickness on model accuracy10.1007/s00056-019-00180-y ↗
30. The influence of substratum topography on bacterial adhesion to polymethyl methacrylate10.1023/A:1008874326324 ↗
31. Surface roughness and wear behavior of occlusal splint materials made of contemporary and high-performance polymers10.1007/s10266-019-00463-1 ↗
32. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature10.1016/S0109-5641(97)80038-3 ↗
33. The effects of surface topography on the accumulation of biofouling10.1080/1478643031000148451 ↗
34. Effect of simulated brushing on surface roughness and wear of bis-acryl-based materials submitted to different polishing protocols10.4317/jced.58920 ↗
35. Chemical Composition, Knoop Hardness, Surface Roughness, and Adhesion Aspects of Additively Manufactured Dental Interim Materials10.1111/jopr.13302 ↗
36. Di Fiore, A., Meneghello, R., Brun, P., Rosso, S., Gattazzo, A., Stellini, E., and Yilmaz, B. (2021). Comparison of the flexural and surface properties of milled, 3D-printed, and heat polymerized PMMA resins for denture bases: An in vitro study. J. Prosthodont. Res.10.2186/jpr.JPR_D_21_00116 ↗
37. A Comparison of the Flexural and Impact Strengths and Flexural Modulus of CAD/CAM and Conventional Heat-Cured Polymethyl Methacrylate (PMMA)10.1111/jopr.12926 ↗
38. Influences of Different Air-Inhibition Coatings on Monomer Release, Microhardness, and Color Stability of Two Composite Materials10.1155/2019/4240264 ↗
39. Effect of Polymer Degree of Conversion on Streptococcus mutans Biofilms10.1002/mabi.201200214 ↗
40. Physicomechanical, optical, and antifungal properties of polymethyl methacrylate modified with metal methacrylate monomers10.1016/j.prosdent.2020.12.039 ↗
41. Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures10.4047/jap.2017.9.5.402 ↗
42. In Vitro Evaluation of Adhesion of Candida albicans on CAD/CAM PMMA-Based Polymers10.1111/jopr.12942 ↗
43. Meirowitz, A., Rahmanov, A., Shlomo, E., Zelikman, H., Dolev, E., and Sterer, N. (2021). Effect of Denture Base Fabrication Technique on Candida albicans Adhesion In Vitro. Materials, 14.10.3390/ma14010221 ↗
44. In vitro adhesion of Candida species to denture base materials10.1111/j.1439-0507.2006.01189.x ↗