journal article·2022-06-08Open access

3D Plotting of Calcium Phosphate Cement and Melt Electrowriting of Polycaprolactone Microfibers in One Scaffold: A Hybrid Additive Manufacturing Process

David Kilian, Max von Witzleben, Matthew Lanaro, Cynthia S. Wong, Corina Vater, Anja Lode, Mark C. Allenby, Maria A. Woodruff, Michael Gelinsky

Abstract

The fabrication of patient-specific scaffolds for bone substitutes is possible through extrusion-based 3D printing of calcium phosphate cements (CPC) which allows the generation of structures with a high degree of customization and interconnected porosity. Given the brittleness of this clinically approved material, the stability of open-porous scaffolds cannot always be secured. Herein, a multi-technological approach allowed the simultaneous combination of CPC printing with melt electrowriting (MEW) of polycaprolactone (PCL) microfibers in an alternating, tunable design in one automated fabrication process. The hybrid CPC+PCL scaffolds with varying CPC strand distance (800–2000 µm) and integrated PCL fibers featured a strong CPC to PCL interface. While no adverse effect on mechanical stiffness was detected by the PCL-supported scaffold design; the microfiber integration led to an improved integrity. The pore distance between CPC strands was gradually increased to identify at which critical CPC porosity the microfibers would have a significant impact on pore bridging behavior and growth of seeded cells. At a CPC strand distance of 1600 µm, after 2 weeks of cultivation, the incorporation of PCL fibers led to pore coverage by a human mesenchymal stem cell line and an elevated proliferation level of murine pre-osteoblasts. The integrated fabrication approach allows versatile design adjustments on different levels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Translational Bone, Joint and Soft Tissue Research, Faculty of Medicine and University Hospital Carl Gustav Carus, Technische Universität Dresden (TUD), 01307 Dresden, Germany

Science and Engineering Faculty, Queensland University of Technology (QUT), Brisbane, QLD 4000, Australia

Institute of Health and Biomedical Innovation, Queensland University of Technology (QUT), Brisbane, QLD 4059, Australia

Funding

the European Social Fund · TU Dresden-based Young Researcher Group IndivImp · the German Academic Exchange Service DAAD · the Graduate Academy of the TU Dresden

References (74)

Show source-provided references
1. 3D printing from MRI Data: Harnessing strengths and minimizing weaknesses10.1002/jmri.25526 ↗
2. 3D Printing of Bone Grafts for Cleft Alveolar Osteoplasty—In vivo Evaluation in a Preclinical Model10.3389/fbioe.2020.00217 ↗
3. A definition of bioinks and their distinction from biomaterial inks10.1088/1758-5090/aaec52 ↗
4. Fabrication of porous scaffolds by three-dimensional plotting of a pasty calcium phosphate bone cement under mild conditions10.1002/term.1563 ↗
5. Properties of injectable ready-to-use calcium phosphate cement based on water-immiscible liquid10.1016/j.actbio.2012.12.017 ↗
6. Effect of calcium carbonate on the compliance of an apatitic calcium phosphate bone cement10.1016/S0142-9612(97)00096-3 ↗
7. Strontium(II) and mechanical loading additively augment bone formation in calcium phosphate scaffolds10.1002/jor.23623 ↗
8. Formation of osteoclasts on calcium phosphate bone cements and polystyrene depends on monocyte isolation conditions10.1089/ten.tec.2014.0187 ↗
9. Ahlfeld, T., Köhler, T., Czichy, C., Lode, A., and Gelinsky, M. (2018). A Methylcellulose Hydrogel as Support for 3D Plotting of Complex Shaped Calcium Phosphate Scaffolds. Gels, 4.10.20944/preprints201807.0288.v1 ↗
10. Porous scaffolds for bone regeneration10.1016/j.jsamd.2020.01.007 ↗
11. Recent advances in bone tissue engineering scaffolds10.1016/j.tibtech.2012.07.005 ↗
12. The return of a forgotten polymer—Polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
13. PCL and PCL-based materials in biomedical applications10.1080/09205063.2017.1394711 ↗
14. De Santis, R., Russo, T., Rau, J.V., Papallo, I., Martorelli, M., and Gloria, A. (2021). Design of 3D Additively Manufactured Hybrid Structures for Cranioplasty. Materials, 14.10.3390/ma14010181 ↗
15. Reconstruction of Complex Maxillary Defects Using Patient-specific 3D-printed Biodegradable Scaffolds. Plast. Reconstr
16. Park, S.A., Lee, H.-J., Kim, K.-S., Lee, S.J., Lee, J.-T., Kim, S.-Y., Chang, N.-H., and Park, S.-Y. (2018). In Vivo Evaluation of 3D-Printed Polycaprolactone Scaffold Implantation Combined with β-TCP Powder for Alveolar Bone Augmentation in a Beagle Defect Model. Materials, 11.10.3390/ma11020238 ↗
17. Engineering printable composites of poly (ε-polycaprolactone)/β-tricalcium phosphate for biomedical applications10.1002/pc.25893 ↗
18. Comparison of the degradation of polycaprolactone and polycaprolactone—(β-tricalcium phosphate) scaffolds in alkaline medium10.1002/pi.2195 ↗
19. Synergistic Effects of Beta Tri-Calcium Phosphate and Porcine-Derived Decellularized Bone Extracellular Matrix in 3D-Printed Polycaprolactone Scaffold on Bone Regeneration10.1002/mabi.201800025 ↗
20. A tissue engineering solution for segmental defect regeneration in load-bearing long bones10.1126/scitranslmed.3003720 ↗
21. Strategies for the design of additively manufactured nanocomposite scaffolds for hard tissue regeneration10.21014/acta_imeko.v9i4.739 ↗
22. 3D additive-manufactured nanocomposite magnetic scaffolds: Effect of the application mode of a time-dependent magnetic field on hMSCs behavior
23. Polymers for Melt Electrowriting10.1002/adhm.202001232 ↗
24. Dimension-Based Design of Melt Electrowritten Scaffolds10.1002/smll.201800232 ↗
25. Melt electrospinning today: An opportune time for an emerging polymer process10.1016/j.progpolymsci.2016.01.001 ↗
26. Design tools for patient specific and highly controlled melt electrowritten scaffolds10.1016/j.jmbbm.2020.103695 ↗
27. Accurate Prediction of Melt Electrowritten Laydown Patterns from Simple Geometrical Considerations10.1002/admt.202000772 ↗
28. Reinforcement of hydrogels using three-dimensionally printed microfibres10.1038/ncomms7933 ↗
29. Melt Electrowriting of Complex 3D Anatomically Relevant Scaffolds10.3389/fbioe.2020.00793 ↗
30. Biomimetic Tympanic Membrane Replacement Made by Melt Electrowriting10.1002/adhm.202002089 ↗
31. Brückner, T., Fuchs, A., Wistlich, L., Hoess, A., Nies, B., and Gbureck, U. (2019). Prefabricated and Self-Setting Cement Laminates. Materials, 12.10.3390/ma12050834 ↗
32. A new hybrid scaffold using rapid prototyping and electrohydrodynamic direct writing for bone tissue regeneration10.1039/c1jm13712c ↗
33. Cell proliferation and migration explain pore bridging dynamics in 3D printed scaffolds of different pore size10.1016/j.actbio.2020.07.010 ↗
34. Structure-induced cell growth by 3D printing of heterogeneous scaffolds with ultrafine fibers10.1016/j.matdes.2019.108092 ↗
35. Electrostatic Distortion of Melt-Electrowritten Patterns by 3D Objects: Quantification, Modeling, and Toolpath Correction10.1002/admt.202100345 ↗
36. Advanced tissue engineering scaffold design for regeneration of the complex hierarchical periodontal structure10.1111/jcpe.12214 ↗
37. Combining multi-scale 3D printing technologies to engineer reinforced hydrogel-ceramic interfaces10.1088/1758-5090/ab69d9 ↗
38. Effects of Gradient and Offset Architectures on the Mechanical and Biological Properties of 3-D Melt Electrowritten (MEW) Scaffolds10.1021/acsbiomaterials.8b01456 ↗
39. Systematic design of an advanced open-source 3D bioprinter for extrusion and electrohydrodynamic-based processes10.1007/s00170-021-06634-1 ↗
40. Fibre pulsing during melt electrospinning writing10.1515/bnm-2015-0022 ↗
41. Introducing a single-cell-derived human mesenchymal stem cell line expressing hTERT after lentiviral gene transfer10.1111/j.1582-4934.2008.00299.x ↗
42. Melt electrowriting onto anatomically relevant biodegradable substrates: Resurfacing a diarthrodial joint10.1016/j.matdes.2020.109025 ↗
43. 4D Biofabrication Using a Combination of 3D Printing and Melt-Electrowriting of Shape-Morphing Polymers10.1021/acsami.0c18608 ↗
44. 3D hybrid printing platform for auricular cartilage reconstruction10.1088/2057-1976/ab54a7 ↗
45. Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour mimicking that of ligaments and tendons10.1016/j.actbio.2018.03.023 ↗
46. Melt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures10.1002/adma.201706570 ↗
47. Wang, W., Caetano, G., Ambler, W.S., Blaker, J.J., Frade, M.A., Mandal, P., Diver, C., and Bártolo, P. (2016). Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering. Materials, 9.10.3390/ma9120992 ↗
48. Enhancing Biocompatibility without Compromising Material Properties: An Optimised NaOH Treatment for Electrospun Polycaprolactone Fibres10.1155/2019/4605092 ↗
49. Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: A preliminary study for vascular graft development10.1002/mabi.200400214 ↗
50. Effect of Na+ and NaOH concentrations on the surface morphology and dissolution behavior of hydroxyapatite10.1016/j.ceramint.2014.10.162 ↗
51. Modelling and optimization of NaOH-etched 3-D printed PCL for enhanced cellular attachment and growth with minimal loss of mechanical strength10.1016/j.msec.2018.12.084 ↗
52. Bioprinting of mineralized constructs utilizing multichannel plotting of a self-setting calcium phosphate cement and a cell-laden bioink10.1088/1758-5090/aad36d ↗
53. Richter, R.F., Ahlfeld, T., Gelinsky, M., and Lode, A. (2019). Development and Characterization of Composites Consisting of Calcium Phosphate Cements and Mesoporous Bioactive Glass for Extrusion-Based Fabrication. Materials, 12.10.3390/ma12122022 ↗
54. Primary stability of press-fit-implanted osteochondral grafts. Influence of graft size, repeated insertion, and harvesting technique10.1177/03635465000280011601 ↗
55. Biological and mechanical performance and degradation characteristics of calcium phosphate cements in large animals and humans10.1016/j.actbio.2020.09.031 ↗
56. Ahlfeld, T., Lode, A., Richter, R.F., Pradel, W., Franke, A., Rauner, M., Stadlinger, B., Lauer, G., Gelinsky, M., and Korn, P. (2021). Toward Biofabrication of Resorbable Implants Consisting of a Calcium Phosphate Cement and Fibrin-A Characterization In Vitro and In Vivo. Int. J. Mol. Sci., 22.10.3390/ijms22031218 ↗
57. A Materials Perspective on the Design of Damage-Resilient Bone Implants Through Additive/Advanced Manufacturing10.1007/s11837-019-03999-3 ↗
58. Reinforcement Strategies for Load-Bearing Calcium Phosphate Biocements10.3390/ma8052700 ↗
59. Fabrication of 3D printed antimicrobial polycaprolactone scaffolds for tissue engineering applications10.1016/j.msec.2020.111525 ↗
60. Calcium phosphate cements for bone engineering and their biological properties10.1038/boneres.2017.56 ↗
61. Polycaprolactone as biomaterial for bone scaffolds: Review of literature10.1016/j.jobcr.2019.10.003 ↗
62. Design and characterization of calcium phosphate ceramic scaffolds for bone tissue engineering10.1016/j.dental.2015.09.008 ↗
63. Designing Outside the Box: Unlocking the Geometric Freedom of Melt Electrowriting using Microscale Layer Shifting10.1002/adma.202001874 ↗
64. Model-based data analysis of tissue growth in thin 3D printed scaffolds10.1016/j.jtbi.2021.110852 ↗
65. Role of offset and gradient architectures of 3-D melt electrowritten scaffold on differentiation and mineralization of osteoblasts10.1186/s40824-019-0180-z ↗
66. Combined additive manufacturing approaches in tissue engineering10.1016/j.actbio.2015.06.032 ↗
67. Simultaneous Micropatterning of Fibrous Meshes and Bioinks for the Fabrication of Living Tissue Constructs10.1002/adhm.201800418 ↗
68. Enhancing structural integrity of hydrogels by using highly organised melt electrospun fibre constructs10.1016/j.eurpolymj.2015.07.034 ↗
69. 3D printing of composite tissue with complex shape applied to ear regeneration10.1088/1758-5082/6/2/024103 ↗
70. Biofabrication of a shape-stable auricular structure for the reconstruction of ear deformities10.1016/j.mtbio.2021.100094 ↗
71. Hydrogel-Based Bioinks for Cell Electrowriting of Well-Organized Living Structures with Micrometer-Scale Resolution10.1021/acs.biomac.0c01577 ↗
72. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies10.1002/adma.201902026 ↗
73. 25th anniversary article: Engineering hydrogels for biofabrication10.1002/adma.201302042 ↗
74. Three-dimensional bioprinting of volumetric tissues and organs10.1557/mrs.2017.164 ↗