journal article·2022-11-21Open access

Multifunctional Medical Grade Resin with Enhanced Mechanical and Antibacterial Properties: The Effect of Copper Nano-Inclusions in Vat Polymerization (VPP) Additive Manufacturing

Nectarios Vidakis, Markos Petousis, Vassilis M. Papadakis, Nikolaos Mountakis

Abstract

Vat photopolymerization (VPP) is an additive manufacturing process commonly used in medical applications. This work aims, for the first time in the literature, to extend and enhance the performance of a commercial medical-grade resin for the VPP process, with the development of nanocomposites, using Copper (Cu) nanoparticles as the additive at two different concentrations. The addition of the Cu nanoparticles was expected to enhance the mechanical properties of the resin and to enable biocidal properties on the nanocomposites since Cu is known for its antibacterial performance. The effect of the Cu concentration was investigated. The nanocomposites were prepared with high-shear stirring. Specimens were 3D printed following international standards for mechanical testing. Their thermal and spectroscopic response was also investigated. The morphological characteristics were examined. The antibacterial performance was evaluated with an agar well diffusion screening process. The experimental results were analyzed with statistical modeling tools with two control parameters (three levels each) and eleven response parameters. Cu enhanced the mechanical properties in all cases studied. 0.5 wt.% Cu nanocomposite showed the highest improvement (approximately 11% in tensile and 10% in flexural strength). The antibacterial performance was sufficient against S. aureus and marginal against E. coli.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece

Institute of Molecular Biology and Biotechnology, Foundation for Research and Technology—Hellas, 71110 Heraklion, Greece

References (100+)

Show source-provided references
1. Investigations of the mechanical properties on different print orientations in SLA 3D printed resin10.1177/0954406220904106 ↗
2. Nanofillers can be used to enhance the thermal conductivity of commercially available SLA resins10.1016/j.promfg.2020.01.215 ↗
3. Experimental study of strength properties of SLA resins under low and high strain rates10.1016/j.mechmat.2019.103245 ↗
4. Effects of Curing on Photosensitive Resins in SLA Additive Manufacturing10.3390/applmech2040055 ↗
5. Effect of Printing Layer Thickness and Postprinting Conditions on the Flexural Strength and Hardness of a 3D-Printed Resin10.1155/2022/8353137 ↗
6. Fry, C., Mihalko, A., Michael, R., and Piovesan, D. (2018, January 9–15). Mechanical Property Determination of a Stereolithographic Resin Subjected to Compressive Loading. Volume 3: Biomedical and Biotechnology Engineering. Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition, Pittsburgh, Pennsylvania, USA.10.1115/IMECE2018-87600 ↗
7. Sustainable advances in SLA/DLP 3D printing materials and processes10.1039/D1GC01489G ↗
8. Stereolithography (SLA) 3D printing of carbon fiber-graphene oxide (CF-GO) reinforced polymer lattices10.1088/1361-6528/abe825 ↗
9. Podsiadły, B., Skalski, A., Rozpiórski, W., and Słoma, M. (2021). Are We Able to Print Components as Strong as Injection Molded?—Comparing the Properties of 3D Printed and Injection Molded Components Made from ABS Thermoplastic. Appl. Sci., 11.10.3390/app11156946 ↗
10. Performance comparison of the 3D-printed and injection-molded PLA and its elastomer blend and fiber composites10.1177/0892705718772867 ↗
11. Recycled poly(lactic acid)–based 3D printed sustainable biocomposites: A comparative study with injection molding
12. Comparative Performance Analysis of Polylactic Acid Parts Fabricated by 3D Printing and Injection Molding10.1007/s11665-021-05889-9 ↗
13. A parametric determination of bending and Charpy’s impact strength of ABS and ABS-plus fused deposition modeling specimens10.1007/s40964-019-00092-8 ↗
14. On the compressive behavior of an FDM Steward Platform part
15. Garcia, E.A., Ayranci, C., and Qureshi, A.J. (2020). Material Property-Manufacturing Process Optimization for Form 2 Vat-Photo Polymerization 3D Printers. J. Manuf. Mater. Process., 4.10.3390/jmmp4010012 ↗
16. Park, G.-S., Kim, S.-K., Heo, S.-J., Koak, J.-Y., and Seo, D.-G. (2019). Effects of Printing Parameters on the Fit of Implant-Supported 3D Printing Resin Prosthetics. Materials, 12.10.3390/ma12162533 ↗
17. Modelling the Mechanical Properties of Hydroxyapatite Scaffolds Produced by Digital Light Processing-Based Vat Photopolymerization10.3390/ceramics5030044 ↗
18. Martín-Montal, J., Pernas-Sánchez, J., and Varas, D. (2021). Experimental characterization framework for SLA additive manufacturing materials. Polymers, 13.10.3390/polym13071147 ↗
19. Study of photocurable energetic resin based propellants fabricated by 3D printing10.1016/j.matdes.2021.109891 ↗
20. Pagac, M., Hajnys, J., Ma, Q., Jancar, L., Jansa, J., Stefek, P., and Mesicek, J. (2021). A Review of Vat Photopolymerization Technology: Materials. Polymers, 13.10.3390/polym13040598 ↗
21. Arefin, A.M.E., Khatri, N.R., Kulkarni, N., and Egan, P.F. (2021). Polymer 3D printing review: Materials, process, and design strategies for medical applications. Polymers, 13.10.3390/polym13091499 ↗
22. Son, J., and Lee, H. (2020). Preliminary study on polishing SLA 3D-printed ABS-like resins for surface roughness and glossiness reduction. Micromachines, 11.10.3390/mi11090843 ↗
23. Vidakis, N., Petousis, M., Vaxevanidis, N., and Kechagias, J. (2020). Surface roughness investigation of poly-jet 3D printing. Mathematics, 8.10.3390/math8101758 ↗
24. Key parameters controlling surface quality and dimensional accuracy: A critical review of FFF process10.1080/10426914.2022.2032144 ↗
25. A Novel Low-Shrinkage Resin for 3D Printing10.1016/j.jdent.2022.103957 ↗
26. Photo-curing 3D printing technique and its challenges
27. Guttridge, C., Shannon, A., Sullivan, A.O., Sullivan, K.J.O., and Sullivan, L.W.O. (2022). Impact of Increased UV Curing Time on the Curing Depth of Photosensitive Resins for 3D Printing, Research Square.10.21203/rs.3.rs-1626243/v1 ↗
28. In vitro cytotoxicity assessment of the 3D printed polymer based epoxy resin intended for use in dentistry10.2298/VSP170721127P ↗
29. A Bio-Based Resin for a Multi-Scale Optical 3D Printing10.1038/s41598-020-66618-1 ↗
30. Tappa, K., and Jammalamadaka, U. (2018). Novel biomaterials used in medical 3D printing techniques. J. Funct. Biomater., 9.10.3390/jfb9010017 ↗
31. Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing10.1021/acsomega.7b01648 ↗
32. Vascular 3D Printing with a Novel Biological Tissue Mimicking Resin for Patient-Specific Procedure Simulations in Interventional Radiology: A Feasibility Study10.1007/s10278-021-00553-z ↗
33. Photopolymerizable Resins for 3D-Printing Solid-Cured Tissue Engineered Implants10.2174/1389450120666190114122815 ↗
34. Characterizing and Tuning Perfusion Parameters Within an Innovative, Versatile Oxygenating Perfusion System10.1007/s10439-021-02843-7 ↗
35. Evaluating surface coatings to reduce bone cement adhesion to point of care 3D printed molds in the intraoperative setting10.1186/s41205-022-00156-6 ↗
36. Design and 3D Printing of Scaffolds and Tissues10.15302/J-ENG-2015061 ↗
37. Graphene-reinforced biodegradable resin composites for stereolithographic 3D printing of bone structure scaffolds10.1155/2019/9710264 ↗
38. 3D printing of bone tissue engineering scaffolds
39. 3D printing of bone scaffolds with hybrid biomaterials10.1016/j.compositesb.2018.09.065 ↗
40. 3D Printing of Scaffolds for Tissue Regeneration Applications10.1002/adhm.201500168 ↗
41. Vat photopolymerization 3D printing for advanced drug delivery and medical device applications10.1016/j.jconrel.2020.10.008 ↗
42. Challenges and Opportunities in 3D Printing of Biodegradable Medical Devices by Emerging Photopolymerization Techniques10.1002/adfm.202109864 ↗
43. Influence of 3D-printing method, resin material, and sterilization on the accuracy of virtually designed surgical implant guides10.1016/j.prosdent.2020.08.038 ↗
44. Vidakis, N., Petousis, M., Velidakis, E., Mountakis, N., Tsikritzis, D., Gkagkanatsiou, A., and Kanellopoulou, S. (2022). Investigation of the Biocidal Performance of Multi-Functional Resin/Copper Nanocomposites with Superior Mechanical Response in SLA 3D Printing. Biomimetics, 7.10.3390/biomimetics7010008 ↗
45. Biocompatible 3D printing resins for medical applications: A review of marketed intended use, biocompatibility certification, and post-processing guidance10.1016/j.stlm.2021.100044 ↗
46. Patient-specific desktop 3D-printed guides for pelvic tumour resection surgery: A precision study on cadavers10.1007/s11548-021-02322-3 ↗
47. A magnetoelastic bone fixation device for controlled mechanical stimulation at femoral fractures in rodents10.1088/2631-8695/ac1c97 ↗
48. The Utilization of Three-Dimensional Printing in Creating a Surgical Instrument: An Areola Cookie Cutter10.1093/asjof/ojac055 ↗
49. Franchi, L., Vichi, A., Marti, P., Lampus, F., Guercio, S., Recupero, A., Giuntini, V., and Goracci, C. (2022). 3D Printed Customized Facemask for Maxillary Protraction in the Early Treatment of a Class III Malocclusion: Proof-of-Concept Clinical Case. Materials, 15.10.3390/ma15113747 ↗
50. Lundquist, J., Horstmann, B., Pestov, D., Ozgur, U., Avrutin, V., and Topsakal, E. (2022). Energy-Efficient, On-Demand Activation of Biosensor Arrays for Long-Term Continuous Health Monitoring. Biosensors, 12.10.3390/bios12050358 ↗
51. Tissue-engineered composite tracheal grafts create mechanically stable and biocompatible airway replacements10.1177/20417314221108791 ↗
52. Engineered implantable vaccine platform for continuous antigen-specific immunomodulation10.1016/j.biomaterials.2022.121374 ↗
53. Gholizadeh, S., Lincoln, D.M., Allahyari, Z., Widom, L.P., Robert, N., and Gaborski, T.R. (2022). Effects of Oxygen Plasma Treatment on Parylene C and Parylene N Membrane Biocompatibility for Tissue Barrier Models. bioRxiv.10.1101/2022.06.09.495451 ↗
54. Analytica Chimica Acta Applied tutorial for the design and fabrication of biomicrofluidic devices by resin 3D printing10.1016/j.aca.2022.339842 ↗
55. HoloLens 1 vs. HoloLens 2: Improvements in the New Model for Orthopedic Oncological Interventions10.3390/s22134915 ↗
56. 3D-printed mouthpiece adapter for sampling exhaled breath in medical applications10.1186/s41205-022-00150-y ↗
57. Velentza-Almpani, A., Ibeanu, N., Liu, T., Redhead, C., Khaw, P.T., Brocchini, S., Awwad, S., and Bouremel, Y. (2022). Effects of Flow Hydrodynamics and Eye Movements on Intraocular Drug Clearance. Pharmaceutics, 14.10.3390/pharmaceutics14061267 ↗
58. High-performance medical-grade resin radically reinforced with cellulose nanofibers for 3D printing10.1016/j.jmbbm.2022.105408 ↗
59. Vidakis, N., Petousis, M., Michailidis, N., Papadakis, V., Korlos, A., Mountakis, N., and Argyros, A. (2022). Multi-Functional 3D-Printed Vat Photopolymerization Biomedical-Grade Resin Reinforced with Binary Nano Inclusions: The Effect of Cellulose Nanofibers and Antimicrobial Nanoparticle Agents. Polymers, 14.10.3390/polym14091903 ↗
60. Porous covalent-organic materials: Synthesis, clean energy application and design10.1039/C2TA00063F ↗
61. Organic materials for hydrogen storage applications: From physisorption on organic solids to chemisorption in organic molecules10.1039/b822279g ↗
62. Organic materials for reversible optical data storage10.1016/S0040-4020(01)81913-X ↗
63. Organic materials for photovoltaic applications: Review and mechanism10.1016/j.synthmet.2014.01.022 ↗
64. 2D Organic Materials for Optoelectronic Applications10.1002/adma.201702415 ↗
65. Degree of conversion versus the depth of polymerization of an organically modified ceramic dental restoration composite by fourier transform infrared spectroscopy10.1002/app.23248 ↗
66. Monomers used in resin composites: Degree of conversion, mechanical properties and water sorption/solubility10.1590/S0103-64402012000500007 ↗
67. Hardness and degree of conversion of dental restorative compositesbased on an organic-inorganic hybrid10.1590/S1516-14392013005000089 ↗
68. Determination of degree of conversion as function of depth of a photo-initiated dental restoration composite10.1016/j.polymertesting.2005.02.003 ↗
69. Effects of monomer ratios and highly radiopaque fillers on degree of conversion and shrinkage-strain of dental resin composites10.1016/j.dental.2009.06.009 ↗
70. Flame-Retardancy Properties of Intumescent Ammonium Poly(Phosphate) and Mineral Filler Magnesium Hydroxide in Combination with Graphene
71. Synthesis and characterization of copper nanoparticles10.1016/j.matlet.2007.03.014 ↗
72. Jiang, Q., Zhang, P., Yu, Z., Shi, H., Wu, D., Yan, H., Ye, X., Lu, Q., and Tian, Y. (2021). A review on additive manufacturing of pure copper. Coatings, 11.10.3390/coatings11060740 ↗
73. On the processability of copper components via powder-based additive manufacturing processes: Potentials, challenges and feasible solutions10.1016/j.jmapro.2021.10.038 ↗
74. Hammami, I., Gavinho, S.R., Pádua, A.S., Silva, J.C., and Graça, M.P.F. (2022). Copper-doped 45S5 bioactive glass for implants: Synthesis and physical-biological characterization. SSRN, 1–19.10.2139/ssrn.4220857 ↗
75. Abdel-wahab Photocatalytic activity in nanostructured zinc oxide thin films doped with metallic copper10.1016/j.physb.2022.414352 ↗
76. Fish and Shellfish Immunology Effect of acute Cu exposure on immune response mechanisms of golden cuttlefish ( Sepia esculenta)10.1016/j.fsi.2022.09.021 ↗
77. Synthesis and antimicrobial activity of copper nanoparticles10.1016/j.matlet.2011.12.055 ↗
78. Marine organisms: Pioneer natural sources of polysaccharides/proteins for green synthesis of nanoparticles and their potential applications10.1016/j.ijbiomac.2021.10.229 ↗
79. Yosri, N., El-Wahed, A.A.A., Ghonaim, R., Khattab, O.M., Sabry, A., Ibrahim, M.A.A., Moustafa, M.F., Guo, Z., Zou, X., and Algethami, A.F.M. (2021). Anti-viral and immunomodulatory properties of propolis: Chemical diversity, pharmacological properties, preclinical and clinical applications, and in silico potential against SARS-CoV-2. Foods, 10.10.3390/foods10081776 ↗
80. Effects of Nanoformulated Plant Growth Regulator on Culturable Bacterial Population, Microbial Biomass and Enzyme Activities in Two Soil Types10.61310/mndjstea.0981.21 ↗
81. Strain specificity in antimicrobial activity of silver and copper nanoparticles10.1016/j.actbio.2007.11.006 ↗
82. Copper nanoparticles with high antimicrobial activity10.1016/j.matlet.2014.04.106 ↗
83. Mechanism of antibacterial activity of copper nanoparticles10.1088/0957-4484/25/13/135101 ↗
84. Antibacterial activity of a glass ionomer cement doped with copper nanoparticles10.4012/dmj.2019-046 ↗
85. Xu, V.W., Nizami, M.Z.I., Yin, I.X., Yu, O.Y., Lung, C.Y.K., and Chu, C.H. (2022). Application of Copper Nanoparticles in Dentistry. Nanomaterials, 12.10.3390/nano12050805 ↗
86. Marovic, D., Par, M., Tauböck, T.T., Haugen, H.J., Negovetic Mandic, V., Wüthrich, D., Burrer, P., Zheng, K., Attin, T., and Tarle, Z. (2022). Impact of Copper-Doped Mesoporous Bioactive Glass Nanospheres on the Polymerisation Kinetics and Shrinkage Stress of Dental Resin Composites. Int. J. Mol. Sci., 23.10.3390/ijms23158195 ↗
87. Laser-based powder bed fusion additive manufacturing of pure copper
88. Surface Modified Copper Alloy Powder for Reliable Laser-based Additive Manufacturing
89. Open-cellular copper structures fabricated by additive manufacturing using electron beam melting10.1016/j.msea.2011.03.053 ↗
90. Bonding characteristics during very high power ultrasonic additive manufacturing of copper10.1016/j.scriptamat.2009.12.040 ↗
91. Petousis, M., Vidakis, N., Velidakis, E., Kechagias, J.D., David, C.N., Papadakis, S., and Mountakis, N. (2022). Affordable Biocidal Ultraviolet Cured Cuprous Oxide Filled Vat Photopolymerization Resin Nanocomposites with Enhanced Mechanical Properties. Biomimetics, 7.10.3390/biomimetics7010012 ↗
92. Petousis, M., Vidakis, N., Mountakis, N., Papadakis, V., Kanellopoulou, S., Gaganatsiou, A., Stefanoudakis, N., and Kechagias, J. (2022). Multifunctional Material Extrusion 3D-Printed Antibacterial Polylactic Acid ( PLA ) with Binary Inclusions: The Effect of Cuprous Oxide and Cellulose Nanofibers. Fibers, 10.10.3390/fib10060052 ↗
93. Vidakis, N., Petousis, M., Michailidis, N., Grammatikos, S., David, C.N., Mountakis, N., Argyros, A., and Boura, O. (2022). Development and Optimization of Medical-Grade MultiFunctional Polyamide 12-Cuprous Oxide Nanocomposites with Superior Mechanical and Antibacterial Properties for Cost-Effective 3D Printing. Nanomaterials, 12.10.3390/nano12030534 ↗
94. Vidakis, N., Petousis, M., Mountakis, N., Korlos, A., Papadakis, V., and Moutsopoulou, A. (2022). Trilateral Multi-Functional Polyamide 12 Nanocomposites with Binary Inclusions for Medical Grade Material Extrusion 3D Printing: The Effect of Titanium Nitride in Mechanical Reinforcement and Copper/Cuprous Oxide as Antibacterial Agents. J. Funct. Biomater., 13.10.3390/jfb13030115 ↗
95. Yang, F., Zeng, J., Long, H., Xiao, J., Luo, Y., Gu, J., Zhou, W., Wei, Y., and Dong, X. (2020). Micrometer copper-zinc alloy particles-reinforced wood plastic composites with high gloss and antibacterial properties for 3d printing. Polymers, 12.10.3390/polym12030621 ↗
96. Mechanical response assessment of antibacterial PA12/TiO2 3D printed parts: Parameters optimization through artificial neural networks modeling10.1007/s00170-022-09376-w ↗
97. Vidakis, N., Petousis, M., Velidakis, E., Mountakis, N., Tzounis, L., Liebscher, M., and Grammatikos, S.A. (2021). Enhanced mechanical, thermal and antimicrobial properties of additively manufactured polylactic acid with optimized nano silica content. Nanomaterials, 11.10.3390/nano11041012 ↗
98. Vidakis, N., Petousis, M., Velidakis, E., Liebscher, M., and Tzounis, L. (2020). Three-Dimensional Printed Antimicrobial Objects of Polylactic Acid (PLA)-Silver Nanoparticle Nanocomposite Filaments Produced by an In-Situ Reduction Reactive Melt Mixing Process. Biomimetics, 5.10.3390/biomimetics5030042 ↗
99. Tzounis, L., Bangeas, P.I., Exadaktylos, A., Petousis, M., and Vidakis, N. (2020). Three-dimensional printed polylactic acid (PLA) surgical retractors with sonochemically immobilized silver nanoparticles: The next generation of low-cost antimicrobial surgery equipment. Nanomaterials, 10.10.3390/nano10050985 ↗
100. 3D printed antibacterial silver nanowire/polylactide nanocomposites10.1016/j.compositesb.2019.05.059 ↗