journal article·2022-08-26Open access

The Promotion of Mechanical Properties by Bone Ingrowth in Additive-Manufactured Titanium Scaffolds

Changning Sun, Enchun Dong, Jiayu Chen, Jibao Zheng, Jianfeng Kang, Zhongmin Jin, Chaozong Liu, Ling Wang, Dichen Li

Abstract

Although the initial mechanical properties of additive-manufactured (AM) metal scaffolds have been thoroughly studied and have become a cornerstone in the design of porous orthopaedic implants, the potential promotion of the mechanical properties of the scaffolds by bone ingrowth has barely been studied. In this study, the promotion of bone ingrowth on the mechanical properties of AM titanium alloy scaffolds was investigated through in vivo experiments and numerical simulation. On one hand, the osseointegration characteristics of scaffolds with architectures of body-centred cubic (BCC) and diamond were compared through animal experiments in which the mechanical properties of both scaffolds were not enhanced by the four-week implantation. On the other hand, the influences of the type and morphology of bone tissue in the BCC scaffolds on its mechanical properties were investigated by the finite element model of osseointegrated scaffolds, which was calibrated by the results of biomechanical testing. Significant promotion of the mechanical properties of AM metal scaffolds was only found when cortical bone filled the pores in the scaffolds. This paper provides a numerical prediction method to investigate the effect of bone ingrowth on the mechanical properties of AM porous implants, which might be valuable for the design of porous implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710054, China

National Medical Products Administration (NMPA) Key Laboratory for Research and Evaluation of Additive Manufacturing Medical Devices, Xi’an Jiaotong University, Xi’an 710054, China

Institute of Orthopaedic & Musculoskeletal, University College London, Royal National Orthopaedic Hospital, London HA7 4LP, UK

Jihua Laboratory, Foshan 528200, China

School of Mechanical Engineering, University of Leeds, Leeds LS2 9JT, UK

Funding

ational Key R&D Program of China · Key R&D Program of Guangdong Province · China Postdoctoral Science Foundation · Natural Science Basic Research Program of ShaanXi Province · Key R&D Program of Ningxia Province · Program of the National Natural Science Foundation of China · Engineering and Physical Science Research Council (EPSRC) · Fundamental Research Funds for the Central Universities · Youth Innovation Team of Shaanxi Universities

References (33)

Show source-provided references
1. Biomechanical Optimization of Elastic Modulus Distribution in Porous Femoral Stem for Artificial Hip Joints10.1007/s42235-018-0057-1 ↗
2. Functionally graded materials for orthopedic applications—An update on design and manufacturing10.1016/j.biotechadv.2015.12.013 ↗
3. Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review10.1016/j.jmbbm.2020.103671 ↗
4. Anisotropy characteristics of microstructures for bone substitutes and porous implants with application of additive manufacturing in orthopaedic10.1016/j.matdes.2020.108608 ↗
5. Additive Manufacturing of Titanium Alloys for Orthopedic Applications: A Materials Science Viewpoint10.1002/adem.201800172 ↗
6. Jammalamadaka, U., and Tappa, K. (2018). Recent Advances in Biomaterials for 3D Printing and Tissue Engineering. J. Funct. Biomater., 9.10.3390/jfb9010022 ↗
7. Tappa, K., and Jammalamadaka, U. (2018). Novel Biomaterials Used in Medical 3D Printing Techniques. J. Funct. Biomater., 9.10.3390/jfb9010017 ↗
8. Design of dental implants at materials level: An overview10.1002/jbm.a.36931 ↗
9. Topological design and biomechanical evaluation for 3D printed multi-segment artificial vertebral implants10.1016/j.msec.2021.112250 ↗
10. Preclinical Strength Checking for Artificial Pelvic Prosthesis under Multi-activities-A Case Study10.1007/s42235-019-0121-5 ↗
11. Topology optimization of 3D-printed structurally porous cage for acetabular reinforcement in total hip arthroplasty10.1016/j.jmbbm.2020.103705 ↗
12. Egan, P.F. (2019). Integrated Design Approaches for 3D Printed Tissue Scaffolds: Review and Outlook. Materials, 12.10.3390/ma12152355 ↗
13. The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction10.1016/j.matdes.2018.04.065 ↗
14. Bone bonding strength of diamond-structured porous titanium-alloy implants manufactured using the electron beam-melting technique10.1016/j.msec.2015.11.025 ↗
15. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment10.1016/j.msec.2015.10.069 ↗
16. 3D-printed porous Ti6Al4V scaffolds for long bone repair in animal models: A systematic review10.1186/s13018-022-02960-6 ↗
17. Fabrication of bioactive 3D printed porous titanium implants with Sr ions-incorporated zeolite coatings for bone ingrowth10.1039/C8TB00328A ↗
18. Additively-manufactured PEEK/HA porous scaffolds with excellent osteogenesis for bone tissue repairing10.1016/j.compositesb.2021.109508 ↗
19. Koolen, M., Yavari, S.A., Lietaert, K., Wauthle, R., Zadpoor, A.A., and Weinans, H. (2020). Bone Regeneration in Critical-Sized Bone Defects Treated with Additively Manufactured Porous Metallic Biomaterials: The Effects of Inelastic Mechanical Properties. Materials, 13.10.3390/ma13081992 ↗
20. Biomechanical evaluation of porous bioactive ceramics after implantation: Micro CT-based three-dimensional finite element analysis10.1007/s10856-011-4469-2 ↗
21. Variation of mechanical behavior of beta-TCP/collagen two phase composite scaffold with mesenchymal stem cell in vitro10.1016/j.jmbbm.2016.04.019 ↗
22. How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?10.1016/j.jmbbm.2016.10.003 ↗
23. Comparison of the mechanobiological performance of bone tissue scaffolds based on different unit cell geometries10.1016/j.jmbbm.2018.04.008 ↗
24. Mapping porous microstructures to yield desired mechanical properties for application in 3D printed bone scaffolds and orthopaedic implants10.1016/j.matdes.2017.07.021 ↗
25. 3D-printed titanium implant-coated polydopamine for repairing femoral condyle defects in rabbits10.1186/s13018-020-01593-x ↗
26. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)10.1016/j.jmbbm.2009.10.006 ↗
27. Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks10.1016/j.jmatprotec.2014.05.006 ↗
28. Evaluation of the stiffness characteristics of square pore CoCrMo cellular structures manufactured using laser melting technology for potential orthopaedic applications10.1016/j.matdes.2013.05.009 ↗
29. Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing10.1016/j.matdes.2013.01.071 ↗
30. Biomechanical behaviours of the bone-implant interface: A review10.1098/rsif.2019.0259 ↗
31. A stochastic micro to macro mechanical model for the evolution of bone-implant interface stiffness10.1016/j.actbio.2021.06.019 ↗
32. Qiang, Z. (2020). In situ experimental study of the micromechanical properties of cortical bone. [Master’s Thesis, Jilin University].
33. Yang, S. (2006). Animal experiment (rabbit) to demonstrate changes in trabecular bone mechanical properties over time using finite element analysis. [Ph.D. Thesis, University of Louisville].