Challenges and Future Perspectives for Additively Manufactured Polylactic Acid Using Fused Filament Fabrication in Dentistry
Source abstract
Abstract
Additive manufacturing (AM), which is also called rapid prototyping/3D printing/layered manufacturing, can be considered as a rapid conversion between digital and physical models. One of the most used materials in AM is polylactic acid (PLA), which has advantageous material properties such as biocompatibility, biodegradability, and nontoxicity. For many medical applications, it is considered as a leading biomaterial. In dentistry, in addition to its uses in dental models (education, teaching, simulation needs), it can be used for therapeutic objectives and tissue engineering. The fused filament fabrication (FFF) technique, also called fused deposition modeling (FDM), is widely used as an AM technique to perform complex and functional geometries directly from CAD files. In this review, the objective was to present the different challenges and future perspectives of this additively manufactured material by using FFF in dentistry areas. Some suggestions for future directions to extend to more dental applications (support structures, lattice structures, etc.) and to consider more criteria (sustainability, uncertainty etc.) will be discussed. Advanced studies such as machine learning (ML) techniques will be suggested to reduce the failure cases when using the additively manufactured PLA by FFF in dentistry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanics Laboratory of Normandy, INSA Rouen, 76800 St Etienne du Rouvray, France
3D printing 4U (UG), Nördlinger Str. 10, 51103 Cologne, Germany
References (100+)
Show source-provided references
1. A Review of 3D Printing Technology for Medical Applications10.1016/j.eng.2018.07.021 ↗
2. 3D Printing and 3D Bioprinting in Pediatrics
3. Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques10.1016/j.memsci.2016.10.006 ↗
4. A review on 3D printing: An additive manufacturing technology10.1016/j.matpr.2022.02.558 ↗
5. Pradeep, K., and Pal, B. (2023). Advances in Additive Manufacturing: Artificial Intelligence, Nature-Inspired, and Biomanufacturing, Elsevier.
6. Additive manufacturing technologies: Industrial and medical applications10.1016/j.susoc.2022.05.001 ↗
7. Materials for additive manufacturing10.1016/j.cirp.2017.05.009 ↗
8. Sin, L.T., Rahmat, A.R., and Abdul Rahman, W.A.W. (2013). Polylactic Acid, A Volume in Plastics Design Library, Elsevier.
9. Sin, L.T., and Tueen, B.S. (2019). Polylactic Acid, A Practical Guide for the Processing, Manufacturing, and Applications of PLA, A Volume in Plastics Design Library, Elsevier. [2nd ed.].
10. Massey, L.K. (2007). Plastics Design Library, The Effects of UV Light and Weather on Plastics and Elastomers, William Andrew Publishing. [2nd ed.].10.1016/B978-081551525-8.50064-6 ↗
11. Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective
12. Gilbert, M. (2007). Brydson’s Plastics Materials, Butterworth-Heinemann. [8th ed.].
13. Surface modification of carbon black for the reinforcement of polycarbonate/acrylonitrile–butadiene–styrene blends10.1016/j.apsusc.2015.05.106 ↗
14. Trivedi, P.D. (2023). Specialty Thermoplastics, Hanser.10.3139/9781569907016.fm ↗
15. Kumar, A., Mittal, R.K., and Haleem, A. (2023). Additive Manufacturing Materials and Technologies, Advances in Additive Manufacturing, Elsevier.
16. Müller, A., and Karevska, S. How will 3D printing make your company the strongest link in the value chain, EY’s Global 3D printing Report 2016, EY.
17. 3D printed bio-models for medical applications10.1108/RPJ-08-2015-0102 ↗
18. Additive manufacturing: Scientific and technological challenges, market uptake and opportunities10.1016/j.mattod.2017.07.001 ↗
19. A Review on Uncertainty Cases in Additively Manufactured Polylactic Acid Using Fused Filament Fabrication Technique
20. Comparing the effects of titanium alloy and chrome cobalt in removable partial denture connectors on tooth mobility, bone loss and tissue reaction10.1016/j.sjdr.2016.01.001 ↗
21. Preliminary report: Rapid prototyping models for dysplastic hip surgery
22. Main clinical use of additive manufacturing (three-dimensional printing) in Finland restricted to the head and neck area in 2016–201710.1177/1457496919840958 ↗
23. Zadpoor, A.A., and Malda, J. (2017). Additive Manufacturing of Biomaterials, Tissues, and Organs, Springer.10.1007/s10439-016-1719-y ↗
24. Current status and future directions of fused filament fabrication10.1016/j.jmapro.2020.04.049 ↗
25. In situ thermal image analysis of selective laser sintering for oral dosage form manufacturing10.1016/j.jpba.2023.115396 ↗
26. Kumar, P., Misra, M., and Menezes, P.L. (2022). Elsevier Series on Tribology and Surface Engineering, Tribology of Additively Manufactured Materials, Elsevier.
27. Quantification of surface roughness of parts processed by laminated object manufacturing10.1016/j.jmatprotec.2011.08.013 ↗
28. Digital dentistry-3D printing applications10.1515/jim-2017-0032 ↗
29. 3D Printing Encompassing the facets of dentistry10.3389/fbioe.2018.00172 ↗
30. Dimensional accuracy and surface roughness of polymeric dental bridges produced by different 3D printing processes10.5604/01.3001.0012.8660 ↗
31. Direct 3D-printing of cell-laden constructs in microfluidic architectures10.1039/C6LC00144K ↗
32. The fit consideration of the denture manufactured by 3D printing and sintering
33. A 3D printed TCP/HA structure as a new osteoconductive scaffold for vertical bone augmentation10.1111/clr.12503 ↗
34. Practical analysis of direct metal laser sintering process10.1016/j.matpr.2021.02.138 ↗
35. Heat-cured poly(methyl methacrylate) resin incorporated with different food preservatives as an anti-microbial denture base material10.1016/j.jds.2020.09.006 ↗
36. Thermoplastic 3D printing—An additive manufacturing method for producing dense ceramics10.1111/ijac.12306 ↗
37. Polylactides in additive biomanufacturing10.1016/j.addr.2016.07.006 ↗
38. Optimisation of the additive manufacturing parameters of polylactic acid (PLA) cellular structures for biomedical applications10.1016/j.jmbbm.2022.105447 ↗
39. Combined use of an anterolateral thigh flap and rapid prototype modeling to reconstruct maxillary oncologic resections and midface defects10.1097/SCS.0000000000000602 ↗
40. Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology10.1007/s10047-009-0462-7 ↗
41. Accuracy of upper jaw positioning with intermediate splint fabrication after virtual planning in bimaxillary orthognathic surgery10.1097/SCS.0b013e31829a80d9 ↗
42. CAD/CAM and rapid prototyped titanium for reconstruction of ramus defect and condylar fracture caused by mandibular reduction10.1016/j.tripleo.2011.03.034 ↗
43. A comparative study of additive and subtractive manufacturing for dental restorations10.1016/j.prosdent.2016.11.004 ↗
44. Chairside fabrication of provisional crowns on FDM 3D-printed PVA model10.1016/j.jpor.2019.11.004 ↗
45. Fused deposition modeling shaping of glass infiltrated alumina for dental restoration10.1016/j.ceramint.2019.09.205 ↗
46. Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys10.1016/j.prosdent.2020.03.012 ↗
47. Baciu, E.R., Cimpoe, R., Vi, A., Baciu, C., Cimpoe, N., Sodor, A., Zegan, G., and Murariu, A. (2021). Surface analysis of 3D (SLM) CO–CR–W dental metallic materials. Appl. Sci., 11.10.3390/app11010255 ↗
48. Belgacem, M.N. (2008). Alessandro Gandini, Monomers, Polymers and Composites from Renewable Resources, Elsevier.
49. Improvement of thermal behaviors of biodegradable poly(lactic acid) polymer: A review10.1016/j.compositesb.2018.10.078 ↗
50. Binod, P., Raveendran, S., and Pandey, A. (2021). Biomass, Biofuels, Biochemicals, Elsevier.
51. 4D printing of shape memory polylactic acid (PLA)10.1016/j.polymer.2021.124080 ↗
52. FDM process parameters influence over the mechanical properties of polymer specimens: A review10.1016/j.polymertesting.2018.05.020 ↗
53. Physical and mechanical properties of PLA, and their functions in widespread applications—A comprehensive review10.1016/j.addr.2016.06.012 ↗
54. Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems10.1016/j.cej.2018.01.010 ↗
55. Polylactic acid production from biotechnological routes: A review10.1016/j.ijbiomac.2021.07.074 ↗
56. Biocompatibility and safety of PLA and its copolymers10.1016/j.addr.2016.03.012 ↗
57. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications10.1088/1758-5082/5/1/015001 ↗
58. 3D-printableantimicrobial composite resins10.1002/adfm.201502384 ↗
59. Rapid prototyping for assembly training and validation
60. Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential10.1016/j.ast.2016.12.019 ↗
61. Material characterization of fused deposition modeling (FDM) ABS by designed experiments
62. Alhubail, M. (2012). Statistical-Based Optimization of Process Parameters of Fused Deposition Modelling For Improved Quality. [Ph.D. Thesis, University of Portsmouth].
63. Fatimatuzahraa, A.W., Farahaina, B., and Yusoff, W.A.Y. (2011, January 25–28). The effect of employing different raster orientations on the mechanical properties and microstructure of fused deposition modeling parts. Proceedings of the 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), Langkawi, Malaysia.10.1109/ISBEIA.2011.6088811 ↗
64. Parametric appraisal of mechanical property of fused deposition modelling processed parts10.1016/j.matdes.2009.06.016 ↗
65. Influence of process parameters on dimensional accuracy of parts manufactured using fused deposition modelling technology10.5604/20804075.1062340 ↗
66. Characterization and optimization of mechanical properties of ABS parts manufactured by the fused deposition modelling process
67. Moisture and humidity effects on the ABS used in fused deposition modeling machine10.4028/www.scientific.net/AMR.576.641 ↗
68. Improved mechanical properties of 3D-printed parts by fused deposition modeling processed under the exclusion of oxygen10.1007/s40964-016-0010-y ↗
69. The effects of moisture and temperature on the mechanical properties of additive manufacturing components: Fused deposition modeling10.1108/RPJ-08-2015-0095 ↗
70. Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
71. Sustainability perspectives—A review of additive and subtractive manufacturing
72. Design for sustainability (DFS): New challenges in developing and implementing a curriculum for next generation design and manufacturing engineers
73. An overview of the impact of additive manufacturing on supply chain, reshoring, and sustainability10.1016/j.clscn.2023.100103 ↗
74. Design for sustainable additive manufacturing: A review
75. Modeling and process planning for curved layer fused deposition10.1007/s00170-016-9743-5 ↗
76. Material efficiency: A white paper10.1016/j.resconrec.2010.11.002 ↗
77. A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory10.1016/j.jmsy.2014.07.014 ↗
78. CAP splint: An armour to safeguard developing dentition in paediatric mandibular fractures—A case series10.18231/j.ijodr.2021.013 ↗
79. Klineberg, I., and Eckert, S.E. (2016). Functional Occlusion in Restorative Dentistry and Prosthodontics, Mosby.
80. Carr, A.B., and Brown, D.T. (2011). McCracken’s Removable Partial Prosthodontics, Mosby. [12th ed.].
81. Mishra, S., and Datta-Gupta, A. (2018). Applied Statistical Modeling and Data Analytics, Elsevier.
82. Additive manufacturing of polylactic acid (PLA) material considering preheating uncertainty effect
83. Verma, A.K., Ajit, S., and Karanki, D.R. (2016). Uncertainty Analysis in Reliability/Safety Assessment, Chapter 13: Reliability and Safety Engineering, Springer. [2nd ed.].10.1007/978-1-4471-6269-8 ↗
84. Shokrieh, M.M. (2021). Woodhead Publishing Series in Composites Science and Engineering, Residual Stresses in Composite Materials, Woodhead Publishing. [2nd ed.].
85. Current and future trends in topology optimization for additive manufacturing10.1007/s00158-018-1994-3 ↗
86. A Review of Optimised Additively Manufactured Steel Connections for Modular Building Systems
87. Ribeiro, T.P., Bernardo, L.F.A., and Andrade, J.M.A. (2021). Topology Optimisation in Structural Steel Design for Additive Manufacturing. Appl. Sci., 11.10.3390/app11052112 ↗
88. Prediction of surface roughness in extrusion-based additive manufacturing with machine learning10.1016/j.rcim.2019.01.004 ↗
89. Machine learning in tolerancing for additive manufacturing10.1016/j.cirp.2018.04.119 ↗
90. Clifton, N.J. (2014). Methods in Molecular Biology, Humana Press.
91. Predicting the dimensional variation of geometries produced through FDM 3D printing employing supervised machine learning10.1016/j.sintl.2022.100194 ↗
92. King, A.P., and Aljabar, P. (2023). Matlab® Programming for Biomedical Engineers and Scientists, Academic Press. [2nd ed.].
93. Torres-García, A.A., Reyes-García, C.A., Villaseñor-Pineda, L., and Mendoza-Montoya, O. (2022). Biosignal Processing and Classification Using Computational Learning and Intelligence, Academic Press.
94. Hwu, W.-m.W., Kirk, D.B., and El Hajj, I. (2023). Programming Massively Parallel Processors, Morgan Kaufmann. [4th ed.].
95. Chen, Y., Li, L., Li, W., Guo, Q., Du, Z., and Xu, Z. (2023). AI Computing Systems, Morgan Kaufmann.
96. Glimcher, P.W., and Fehr, E. (2014). Neuroeconomics, Academic Press. [2nd ed.].
97. Torres-García, A.A., Reyes-García, C.A., Villaseñor-Pineda, L., and Mendoza-Montoya, O. (2022). Chapter 6—A brief introduction to supervised, unsupervised, and reinforcement learning, In Biosignal Processing and Classification Using Computational Learning and Intelligence, Academic Press.10.1016/B978-0-12-820125-1.00010-5 ↗
98. Reinforcement learning with guarantees: A review10.1016/j.ifacol.2022.07.619 ↗
99. Review of artificial intelligence applications in engineering design perspective10.1016/j.engappai.2022.105697 ↗
100. Zohuri, B., and McDaniel, P. (2022). Transcranial Magnetic and Electrical Brain Stimulation for Neurological Disorders, Academic Press.10.1016/B978-0-323-95416-7.00004-3 ↗