journal article·2021-08-11Open access

Bioprinting and In Vitro Characterization of an Eggwhite-Based Cell-Laden Patch for Endothelialized Tissue Engineering Applications

Yasaman Delkash, Maxence Gouin, Tanguy Rimbeault, Fatemeh Mohabatpour, Petros Papagerakis, Sean Maw, Xiongbiao Chen

Abstract

Three-dimensional (3D) bioprinting is an emerging fabrication technique to create 3D constructs with living cells. Notably, bioprinting bioinks are limited due to the mechanical weakness of natural biomaterials and the low bioactivity of synthetic peers. This paper presents the development of a natural bioink from chicken eggwhite and sodium alginate for bioprinting cell-laden patches to be used in endothelialized tissue engineering applications. Eggwhite was utilized for enhanced biological properties, while sodium alginate was used to improve bioink printability. The rheological properties of bioinks with varying amounts of sodium alginate were examined with the results illustrating that 2.0–3.0% (w/v) sodium alginate was suitable for printing patch constructs. The printed patches were then characterized mechanically and biologically, and the results showed that the printed patches exhibited elastic moduli close to that of natural heart tissue (20–27 kPa) and more than 94% of the vascular endothelial cells survived in the examination period of one week post 3D bioprinting. Our research also illustrated the printed patches appropriate water uptake ability (>1800%).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Pluripotent Stem Cells Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Biomedical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada

School of Engineering, Icam Site de Paris-Sénart, 34 Points de Vue, 77127 Lieusaint, France

School of Engineering, Icam Site de Vendée, 28 Boulevard d’Angleterre, 85000 La Roche-sur-Yon, France

College of Dentistry, University of Saskatchewan, 105 Wiggins Road, Saskatoon, SK S7N 5E4, Canada

Graham School of Professional Development, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada

References (49)

Show source-provided references
1. 3D biofabrication of vascular networks for tissue regeneration : A report on recent advances10.1016/j.jpha.2018.08.005 ↗
2. Chen, X.B.D. (2019). Extrusion Bioprinting of Scaffolds for Tissue Engineering Applications, Springer.10.1007/978-3-030-03460-3 ↗
3. Three-dimensional-printing for microfluidics or the other way around?10.18063/ijb.v5i2.192 ↗
4. Bioprinting for combating infectious diseases10.1016/j.bprint.2020.e00104 ↗
5. Printability in extrusion bioprinting10.1088/1758-5090/abe7ab ↗
6. Key parameters and applications of extrusion-based bioprinting10.1016/j.bprint.2021.e00156 ↗
7. Bioprinting Scaffold-free bioprinting of mesenchymal stem cells using the Regenova printer : Spheroid characterization and osteogenic differentiation10.1016/j.bprint.2019.e00050 ↗
8. Cardiomyocyte Induction and Regeneration for Myocardial Infarction Treatment: Cell Sources and Administration Strategies10.1002/adhm.202001175 ↗
9. Bioprinting and in vitro characterization of alginate dialdehyde–gelatin hydrogel bio-ink10.1007/s42242-020-00058-8 ↗
10. Process-induced cell damage: Pneumatic versus screw-driven bioprinting10.1088/1758-5090/ab5f53 ↗
11. Introduction to the state-of-the-art 3D bioprinting methods, design, and applications in orthopedics10.1016/j.bprint.2019.e00070 ↗
12. Engineering synthetic hydrogel microenvironments to instruct stem cells10.1016/j.copbio.2013.03.009 ↗
13. Facile fabrication of egg white macroporous sponges for tissue regeneration10.1002/adhm.201500482 ↗
14. Albumin-based biomaterial for lung tissue engineering applications10.1080/00914037.2016.1180610 ↗
15. Albumin-based hydrogels for regenerative engineering and cell transplantation10.1002/bit.27167 ↗
16. A novel albumin-based tissue scaffold for autogenic tissue engineering applications
17. Biodegradable scaffold fabricated of electrospun albumin fibers: Mechanical and biological characterization10.1089/ten.tec.2012.0118 ↗
18. Albumin and its application in drug delivery10.1517/17425247.2015.993313 ↗
19. Albumin-based drug delivery: Harnessing nature to cure disease10.1186/s40591-016-0048-8 ↗
20. Preservation of conductive propagation after surgical repair of cardiac defects with a bio-engineered conductive patch10.1016/j.healun.2017.12.011 ↗
21. Serum albumin-coated bone allograft (BoneAlbumin) results in faster bone formation and mechanically stronger bone in aging rats10.1002/term.2803 ↗
22. Albumin fiber scaffolds for engineering functional cardiac tissues10.1002/bit.25185 ↗
23. BioGlue: Albumin/glutaraldehyde sealant in cardiac surgery10.1046/j.0886-0440.2003.00304.x ↗
24. Sutureless coronary artery bypass with biologic glued anastomoses: Preliminary in vivo and in vitro results10.1067/mtc.2000.108596 ↗
25. Collagen-based scaffolds for skin tissue engineering
26. Novel egg white-based 3-D cell culture system10.2144/000112883 ↗
27. Characterization of Hen’s Egg White to Use It as a Novel Platform to Culture Three-Dimensional Multicellular Tumor Spheroids10.1021/acsomega.0c02508 ↗
28. The effects of porosity and stiffness of genipin cross-linked egg white simulating aged extracellular matrix on proliferation and aggregation of ovarian cancer cells10.1016/j.colsurfa.2017.02.031 ↗
29. 3d printing technologies applied for food design: Status and prospects10.1016/j.jfoodeng.2016.01.025 ↗
30. Hydrogels from natural egg white with extraordinary stretchability, direct-writing 3D printability and self-healing for fabrication of electronic sensors and actuators10.1039/C9TA06233E ↗
31. Consequences of neutralization on the proliferation and cytoskeletal organization of chondrocytes on chitosan-based matrices10.1155/2011/809743 ↗
32. Use of the polycation polyethyleneimine to improve the physical properties of alginate-hyaluronic acid hydrogel during fabrication of tissue repair scaffolds10.1080/09205063.2015.1016383 ↗
33. Printability and cell viability in bioprinting alginate dialdehyde-gelatin scaffolds10.1021/acsbiomaterials.9b00167 ↗
34. Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide10.18063/IJB.2016.02.007 ↗
35. Controlling shear stress in 3D bioprinting is a key factor to balance printing resolution and stem cell integrity10.1002/adhm.201500677 ↗
36. Engineering angiogenesis for myocardial infarction repair: Recent developments, challenges, and future directions10.1007/s13239-014-0193-7 ↗
37. Enhancing the vascularization of three-dimensional porous alginate scaffolds by incorporating controlled release basic fibroblast growth factor microspheres10.1002/jbm.a.10542 ↗
38. The spatio-temporal dynamics of ligament healing10.1111/j.1524-475X.2009.00465.x ↗
39. Carriers for the tunable release of therapeutics: Etymological classification and examples10.1080/17425247.2016.1200558 ↗
40. Effects of fluid flow on the in vitro degradation kinetics of biodegradable scaffolds for tissue engineering10.1016/S0142-9612(00)00112-5 ↗
41. Automation of pressure control improves whole porcine heart decellularization10.1089/ten.tec.2014.0709 ↗
42. Escobar, P., Wittles, S., Asfour, S., and Latta, L. (2014, January 15–18). Mechanical characteristics of muscle, skin and fat-elastic moduli for finite element modeling of limbs. Proceedings of the ORS (Orthopaedic Research Society) 2014 Annual Meeting, New Orleans, LA, USA. Poster No. 1173.
43. Elastic properties of synthetic materials for soft tissue modeling10.1088/0031-9155/53/8/008 ↗
44. Datta, S., Barua, R., and Das, J. (2019). Importance of alginate bioink for 3D bioprinting in tissue engineering and regenerative medicine. Alginates: Recent Uses of This Natural Polymer, IntechOpen.10.5772/intechopen.90426 ↗
45. Dispensing-based bioprinting of hybrid scaffolds with vessel-like channels for tissue engineering applications—A brief review10.1016/j.jmbbm.2017.11.037 ↗
46. Alginate: Properties and biomedical applications10.1016/j.progpolymsci.2011.06.003 ↗
47. Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting10.1016/j.actbio.2013.10.016 ↗
48. Shim, J.H., Lee, J.S., Kim, J.Y., and Cho, D.W. (2012). Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system. J. Micromech. Microeng., 22.10.1088/0960-1317/22/8/085014 ↗
49. Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells10.1016/j.biomaterials.2011.11.003 ↗