journal article·2020-10-03Open access

Hierarchical Surface Texturing of Hydroxyapatite Ceramics: Influence on the Adhesive Bonding Strength of Polymeric Polycaprolactone

Jonas Biggemann, Philipp Müller, David Köllner, Swantje Simon, Patrizia Hoffmann, Paula Heik, Jung Heon Lee, Tobias Fey

Abstract

The tailored manipulation of ceramic surfaces gained recent interest to optimize the performance and lifetime of composite materials used as implants. In this work, a hierarchical surface texturing of hydroxyapatite (HAp) ceramics was developed to improve the poor adhesive bonding strength in hydroxyapatite and polycaprolactone (HAp/PCL) composites. Four different types of periodic surface morphologies (grooves, cylindric pits, linear waves and Gaussian hills) were realized by a ceramic micro-transfer molding technique in the submillimeter range. A subsequent surface roughening and functionalization on a micron to nanometer scale was obtained by two different etchings with hydrochloric and tartaric acid. An ensuing silane coupling with 3-aminopropyltriethoxysilane (APTES) enhanced the chemical adhesion between the HAp surface and PCL on the nanometer scale by the formation of dipole–dipole interactions and covalent bonds. The adhesive bonding strengths of the individual and combined surface texturings were investigated by performing single-lap compressive shear tests. All individual texturing types (macro, micro and nano) showed significantly improved HAp/PCL interface strengths compared to the non-textured HAp reference, based on an enhanced mechanical, physical and chemical adhesion. The independent effect mechanisms allow the deliberately hierarchical combination of all texturing types without negative influences. The hierarchical surface-textured HAp showed a 6.5 times higher adhesive bonding strength (7.7 ± 1.5 MPa) than the non-textured reference, proving that surface texturing is an attractive method to optimize the component adhesion in composites for potential medical implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science (Institute of Glass and Ceramics), University of Erlangen-Nuernberg, Martensstr. 5, D-91058 Erlangen, Germany

School of Advanced Materials Science & Engineering, Sungkyunkwan University (SKKU), Suwon 16149, Korea

Frontier Research Institute for Materials Science, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555, Japan

Funding

Friedrich-Alexander-Universität Erlangen-Nürnberg

References (70)

Show source-provided references
1. Lithography-based additive manufacture of ceramic biodevices with design-controlled surface topographies10.1007/s00170-016-8856-1 ↗
2. Role of material surfaces in regulating bone and cartilage cell response10.1016/0142-9612(96)85758-9 ↗
3. Design and fabrication of cast orthopedic implants with freeform surface textures from 3-D printed ceramic shell10.1002/1097-4636(200009)53:5<525::AID-JBM12>3.0.CO;2-1 ↗
4. A review on the wettability of dental implant surfaces I: Theoretical and experimental aspects10.1016/j.actbio.2014.02.040 ↗
5. Surface Modifications and Their Effects on Titanium Dental Implants10.1155/2015/791725 ↗
6. Single-Chain Atomic Crystals as Extracellular Matrix-Mimicking Material with Exceptional Biocompatibility and Bioactivity10.1021/acs.nanolett.8b03201 ↗
7. Effect of surface roughness of hydroxyapatite on human bone marrow cell adhesion, proliferation, differentiation and detachment strength10.1016/S0142-9612(00)00174-5 ↗
8. The effect of ordered and partially ordered surface topography on bone cell responses: A review10.1039/C7BM01016H ↗
9. The survival and proliferation of fibroblasts on ceramic implants: An in vitro study10.1515/bmt-2011-0032 ↗
10. The influence of surface texture and wettability on initial bacterial adhesion on titanium and zirconium oxide dental implants10.1186/s40729-017-0093-3 ↗
11. Some notes on the correlation between fracture and defect statistics: Are Weibull statistics valid for very small specimens?10.1016/j.jeurceramsoc.2005.08.021 ↗
12. Rice, R.W., Mecholsky, J.J., Freiman, S.W., and Morey, S.M. (1979). Failure Causing Defects in Ceramics: What NDE Should Find, Defense Technical Information Center.10.21236/ADA078234 ↗
13. Status of surface modification techniques for artificial hip implants10.1080/14686996.2016.1240575 ↗
14. Surface roughness of ceramic femoral heads after in vivo transfer of metal: Correlation to polyethylene wear10.2106/00004623-200503000-00015 ↗
15. Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty10.1016/j.ceramint.2014.08.123 ↗
16. Friction reduction through biologically inspired scale-like laser surface textures10.3762/bjnano.9.238 ↗
17. Surface Roughness of Ceramic-Resin Composites After Femtosecond Laser Irradiation, Sandblasting or Acid Etching and Their Bond Strength With and Without Silanization to a Resin Cement10.2341/17-391-L ↗
18. Bonding to zirconia ceramic: Adhesion methods and their durability10.1016/S0109-5641(98)00011-6 ↗
19. Development of a novel surface modification for improved bonding to zirconia10.1016/j.dental.2011.01.005 ↗
20. Adhesion/cementation to zirconia and other non-silicate ceramics: Where are we now?10.1016/j.dental.2010.10.022 ↗
21. Surface Textures Fabrication on Zirconia Ceramics by 3D Ultrasonic Vibration Assisted Slant Feed Grinding10.4028/www.scientific.net/AMR.797.326 ↗
22. Engineering substrate topography at the micro- and nanoscale to control cell function10.1002/anie.200805179 ↗
23. Designing hybrid materials10.1016/S1359-6454(03)00441-5 ↗
24. Biocomposites and hybrid biomaterials based on calcium orthophosphates10.4161/biom.1.1.16782 ↗
25. Preparation and characterization of hydroxyapatite/polycaprolactone-chitosan composites10.1007/s10856-009-3810-5 ↗
26. Fracture strength and adhesive strength of hydroxyapatite-filled polycaprolactone10.1007/s10856-007-3016-7 ↗
27. Comparative study of PCL-HAp and PCL-bioglass composite scaffolds for bone tissue engineering10.1007/s10856-013-4878-5 ↗
28. Adhesion between biodegradable polymers and hydroxyapatite: Relevance to synthetic bone-like materials and tissue engineering scaffolds10.1016/j.actbio.2008.04.006 ↗
29. Kim, J.-W., Shin, K.-H., Koh, Y.-H., Hah, M.J., Moon, J., and Kim, H.-E. (2017). Production of Poly(ε-Caprolactone)/Hydroxyapatite Composite Scaffolds with a Tailored Macro/Micro-Porous Structure, High Mechanical Properties, and Excellent Bioactivity. Materials, 10.10.3390/ma10101123 ↗
30. Polycaprolactone/hydroxyapatite composite scaffolds: Preparation, characterization, and in vitro and in vivo biological responses of human primary bone cells10.1002/jbm.a.32657 ↗
31. Antony, B.-F., and Amyl, G. (2016). Novel high-strength bioabsorbable bone adhesives. Front. Bioeng. Biotechnol., 4.10.3389/conf.FBIOE.2016.01.02348 ↗
32. Photolithographic micromolding of ceramics using plasma etched polyimide patterns10.1063/1.110151 ↗
33. Microchannel Molding: A Soft Lithography-inspired Approach to Micrometer-scale Patterning10.1557/JMR.2005.0251 ↗
34. Sol-gel derived materials as substrates for neuronal differentiation: Effects of surface features and protein conformation10.1039/b602008a ↗
35. Sol-gel infiltration of complex cellular indirect 3D printed alumina10.1016/j.jeurceramsoc.2018.04.023 ↗
36. Hermanson, G.T. (2013). Silane coupling agents. Bioconjugate Techniques, Elsevier.10.1016/B978-0-12-382239-0.00013-3 ↗
37. Modular ceramic scaffolds for individual implants10.1016/j.actbio.2018.09.008 ↗
38. Biggemann, J., Hoffmann, P., Hristov, I., Simon, S., Müller, P., and Fey, T. (2020). Injection Molding of 3-3 Hydroxyapatite Composites. Materials, 13.10.3390/ma13081907 ↗
39. Automated 3D assembly of periodic alumina-epoxy composite structures10.1111/jace.15586 ↗
40. FT-IR spectroscopic and thermal studies on pure and impurity added calcium tartrate tetrahydrate crystals10.1002/crat.200410389 ↗
41. Enhanced bone morphogenetic protein-2 performance on hydroxyapatite ceramic surfaces10.1002/jbm.a.31745 ↗
42. German Institute of Standardization E.V (2010). Geometrical Product Specifications (GPS)—Surface Texture: Profile Method—Terms, Definitions and Surface Texture Parameters, Beuth Verlag GmbH. DIN EN ISO 4287:2010-07.
43. German Institute of Standardization E.V (1998). Geometrical Product Specifications (GPS)—Surface Texture: Profile Method—Rules and Procedures for the Assessment of Surface Texture, Beuth Verlag GmbH. DIN EN ISO 4288:1998-04.
44. German Institute of Standardization E.V (2011). Beschichtungsstoffe—Benetzbarkeit—Teil2: Bestimmung der Freien Oberflächenenergie Fester Oberflächen durch Messung des Kontaktwinkels, Beuth Verlag GmbH. DIN 55660-2:2011-12.
45. German Institute of Standardization E.V (2013). Adhesives—Wettability—Determination by Measurement of Contact Angle and Surface Free Energy of Solid Surface, Beuth Verlag GmbH. DIN EN 828:2013-04.
46. The role of van der Waals forces and hydrogen bonds in “hydrophobic interactions” between biopolymers and low energy surfaces10.1016/0021-9797(86)90041-X ↗
47. Additive and nonadditive surface tension components and the interpretation of contact angles10.1021/la00082a018 ↗
48. Bitumen Surface Energy Characterization Using a Contact Angle Approach10.1061/(ASCE)0899-1561(2006)18:6(759) ↗
49. German Institute of Standardization E.V (2009). Adhesives—Determination of Tensile Lap-Shear Strength of Bonded Assemblies, German Version EN 1465:2009, Beuth Verlag GmbH. DIN EN 1465:2009-07.
50. German Institute of Standardization E.V (2019). Adhesives—Determination of Shear Behaviour of Structural Adhesives—Part 2: Tensile Test Method Using Thick Adherends, Beuth Verlag GmbH. ISO 11003-2:2019-06.
51. Measuring and Establishing the Accuracy and Reproducibility of 3D Printed Medical Models10.1148/rg.2017160165 ↗
52. Toth, T., Hudak, R., and Zivcak, J. (2015). Dimensional verification and quality control of implants produced by additive manufacturing. Qual. Innov. Prosper. J., 19.10.12776/qip.v19i1.393 ↗
53. Habenicht, G. (2009). Kleben, Springer.10.1007/978-3-540-85266-7 ↗
54. Bioactivation of inert alumina ceramics by hydroxylation10.1016/j.biomaterials.2005.04.038 ↗
55. Dissolution mechanism of calcium apatites in acids: A review of literature10.5662/wjm.v2.i1.1 ↗
56. Adhesion to and decalcification of hydroxyapatite by carboxylic acids10.1177/00220345010800061701 ↗
57. Acid-Resistant Coatings on Marble10.1111/jace.14355 ↗
58. Interfacial interaction of tartaric acid with hydroxyapatite and enamel10.1007/s10856-005-3581-6 ↗
59. Evidence of chemical bonding at biomaterial-hard tissue interfaces10.1177/00220345000790020301 ↗
60. Thermal degradation of poly((R)-3-hydroxybutyrate), poly(ε-caprolactone), and poly((S)-lactide)10.1016/S0141-3910(01)00265-8 ↗
61. Bio-inspired polydopamine functionalization of carbon fiber for improving the interfacial adhesion of polypropylene composites10.1039/C5RA20045H ↗
62. Mechanisms and kinetics of thermal degradation of poly(epsilon-caprolactone)10.1021/bm0056310 ↗
63. Surface Characterization of the Hydroxy-Terminated Poly(ε-caprolactone)/Poly(dimethylsiloxane) Triblock Copolymers by Electron Spectroscopy for Chemical Analysis and Contact Angle Measurements10.1021/la9620521 ↗
64. Synthesis of fluor-hydroxyapatite powder for plasma sprayed biomedical coatings: Characterization and improvement of the powder properties10.1016/j.powtec.2013.10.022 ↗
65. Wettability and surface free energy of zirconia ceramics and their constituent10.1023/A:1004767914895 ↗
66. Effect of specimen thickness on fracture toughness and adhesive properties of hydroxyapatite-filled polycaprolactone10.1016/j.compositesa.2007.09.004 ↗
67. Duncan, B. (2010). Developments in testing adhesive joints. Advances in Structural Adhesive Bonding: Developments in Testing Adhesive Joints, Elsevier.10.1533/9781845698058.3.389 ↗
68. Moulds, R.J. (2006). Design and stress calculations for bonded joints. Adhesives and Sealants—General Knowledge, Application Techniques, New Curing Techniques: Design and Stress Calculations for Bonded Joints, Elsevier.10.1016/S1874-5695(06)80014-X ↗
69. Evaluation of mechanical interlock effect on adhesion strength of polymer–metal interfaces using micro-patterned surface topography10.1016/j.ijadhadh.2010.05.004 ↗
70. The design, testing and evaluation of adhesively bonded, interlocking, tapered joints between thick aluminium alloy plates10.1016/0143-7496(92)90002-D ↗