journal article·2020-05-07Open access

Modification of PLA-Based Films by Grafting or Coating

Aleksandra Miletić, Ivan Ristić, Maria-Beatrice Coltelli, Branka Pilić

Abstract

Recently, the demand for the use of natural polymers in the cosmetic, biomedical, and sanitary sectors has been increasing. In order to meet specific functional properties of the products, usually, the incorporation of the active component is required. One of the main problems is enabling compatibility between hydrophobic and hydrophilic surfaces. Therefore, surface modification is necessary. Poly(lactide) (PLA) is a natural polymer that has attracted a lot ofattention in recent years. It is bio-based, can be produced from carbohydrate sources like corn, and it is biodegradable. The main goal of this work was the functionalization of PLA, inserting antiseptic and anti-inflammatory nanostructured systems based on chitin nanofibrils–nanolignin complexes ready to be used in the biomedical, cosmetics, and sanitary sectors. The specific challenge of this investigation was to increase the interaction between the hydrophobic PLA matrix with hydrophilic chitin–lignin nanoparticle complexes. First, chemical modification via the “grafting from” method using lactide oligomers was performed. Then, active coatings with modified and unmodified chitin–lignin nanoparticle complexes were prepared and applied on extruded PLA-based sheets. The chemical, thermal, and mechanical characterization of prepared samples was carried out and the obtained results were discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia

Department of Civil and Industrial engineering, University of Pisa, 56122 Pisa, Italy

National Inter University Consortium of Materials Science and Technology (INSTM), 50121 Florence, Italy

Funding

European Union’s Horizon 2020 research and innovation program under grant agreement No. 745839, project POLYBIOSKIN

References (44)

Show source-provided references
1. Influencing factors for the purchase intention of consumers choosing bioplastic products in Germany10.1016/j.spc.2019.01.004 ↗
2. Biopolymer-based functional composites for medical applications10.1016/j.progpolymsci.2016.12.003 ↗
3. Surface modifications for antimicrobial effects in the healthcare setting: A critical overview10.1016/j.jhin.2018.01.018 ↗
4. Formation of contact active antimicrobial surfaces by covalent grafting of quaternary ammonium compounds10.1016/j.colsurfb.2018.04.065 ↗
5. Anti-bacterial surfaces: Natural agents, mechanisms of action, and plasma surface modification10.1039/C4RA17244B ↗
6. Recent developments and future prospects on bio-based polyesters derived from renewable resources: A review10.1016/j.ijbiomac.2015.10.040 ↗
7. Chemical and Biochemical Engineering Approaches in Manufacturing Polyhydroxyalkanoate (PHA) Biopolyesters of Tailored Structure with Focus on the Diversity of Building Blocks10.15255/CABEQ.2018.1385 ↗
8. Drug Delivery and Cosmeceutical Applications of Poly-Lactic Acid Based Novel Constructs—A Review
9. Injectable formulations of poly(lactic acid) and its copolymers in clinical use10.1016/j.addr.2016.07.002 ↗
10. Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications10.1002/jbm.a.30539 ↗
11. PLA composites: From production to properties10.1016/j.addr.2016.04.003 ↗
12. Chitin nanofibrils in renewable materials for packaging and personal care applications10.5185/amlett.2019.2250 ↗
13. Coltelli, M., Cinelli, P., Gigante, V., Aliotta, L., Morganti, P., Panariello, L., and Lazzeri, A. (2019). Chitin Nanofibrils in Poly(Lactic Acid) (PLA) Nanocomposites: Dispersion and Thermo-Mechanical Properties. Int. J. Mol. Sci., 20.10.3390/ijms20030504 ↗
14. Gigante, V., Coltelli, M., Vannozzi, A., Panariello, L., Fusco, A., Trombi, L., Donnarumma, G., Danti, S., and Lazzeri, A. (2019). Flat Die Extruded Biocompatible Poly ( Lactic Acid )/Poly(Butylene Succinate) (PBS) Based Films. Polymers, 11.10.3390/polym11111857 ↗
15. Coltelli, M.B., Aliotta, L., Vannozzi, A., Morganti, P., Panariello, L., Danti, S., Neri, S., Fernandez-Avila, C., Fusco, A., and Donnarumma, G. (2020). Properties and skin compatibility of films based on poly(lactic acid) (PLA) bionanocomposites incorporating chitin nanofibrils (CN). J. Funct. Biomat., 11.10.3390/jfb11020021 ↗
16. Supra-Molecular EcoBioNanocomposites Based on Polylactide and Cellulosic Nanowhiskers: Synthesis and Properties10.1021/bm300149w ↗
17. Rasal, R. (2009). Surface and Bulk Modification of Poly(Lactic Acid). [Ph.D. Thesis, Graduate School of Clemson University].
18. Sergiy, M. (2008). 8 Clarkson Ave Chapter 11 Grafting on Solid Surfaces: “Grafting to” and “Grafting from” Methods. [Master’s Thesis, Clarkson University].
19. Control of Wettability of Polymers by Surface Roughness Modification10.1163/016942410X511042 ↗
20. Surface Grafting of Polymers onto Nanoparticles in a Solvent-FreeDry-System and Applications of Polymer-grafted Nanoparticles as Novel Functional Hybrid Materials10.1295/polymj.PJ2007035 ↗
21. Bulk and surface modifications of polylactide10.1007/s00216-004-2771-2 ↗
22. Single-step covalent functionalization of polylactide surfaces10.1021/ja052073u ↗
23. Stability studies of plasma modification effects of polylactide andpolycaprolactone surface layers
24. The waterborne polyurethane dispersions based on polycarbonate diol: Effect of ionic content10.1016/j.matchemphys.2012.11.057 ↗
25. Mechanical testing of antimicrobial biocomposite coating on metallic medical implants as drug delivery system10.1016/j.msec.2019.109757 ↗
26. Chang, Q., Hao, Y., Cheng, L., Liu, Y., and Qu, A. (2019). Preparation and performance evaluation of biodegradable corn starch film using poly (lactic acid) as waterproof coating. Surf. Eng., 1743–2944.10.1080/02670844.2019.1664086 ↗
27. Antibacterial Al-doped ZnO coatings on PLA films10.1007/s10853-019-04311-z ↗
28. DBD plasma assisted atomic layer deposition alumina barrier layer on selfdegradation polylactic acid film surface10.1088/2058-6272/aae0ee ↗
29. Danti, S., Trombi, L., Fusco, A., Azimi, B., Lazzeri, A., Morganti, P., Coltelli, M.-B., and Donnarumma, G. (2019). Chitin Nanofibrils and Nanolignin as Functional Agents in Skin Regeneration. Int. J. Mol. Sci., 20.10.3390/ijms20112669 ↗
30. Nicotinic acid/niacinamide and the skin10.1111/j.1473-2130.2004.00115.x ↗
31. Morganti, P. (2015). Composition and Material Comprising Chitin Nanofibrils, Lignin and A Co-Polymer and Their Uses. (Application WO2016042474A1), International Patent.
32. Coltelli, M.B., Gigante, V., Vannozzi, A., Aliotta, L., Danti, S., Neri, S., Gagliardini, A., Morganti, P., Panariello, L., and Lazzeri, A. (2019, January 11–15). Poly(Lactic Acid) (Pla) Based Nano-Structured Functional Films For Personal Care Applications. Proceedings of the AUTEX2019–19th World Textile Conference on Textiles at the Crossroads, Ghent, Belgium. Available online: https://ojs.ugent.be/autex/article/view/11509.
33. Molecular-Weight Dependence of Nucleation Effect of a Liquid Crystalline Polyester β Nucleating Agent for Isotactic Polypropylene10.1021/acs.iecr.8b01228 ↗
34. The Properties of Poly(L-Lactide) Prepared by Different Synthesis Procedure10.1007/s10924-011-0297-1 ↗
35. Synthesis and properties of novel star-shaped polyesters based on L-lactide and castor oil10.1007/s00289-013-0917-0 ↗
36. Synthesis of Inorganic Silica Grafted Three-arm PLLA and Their Behaviors for PLA Matrix10.1007/s10118-019-2191-6 ↗
37. Thermal studies of chitin–chitosan derivatives10.1007/s10973-012-2835-z ↗
38. Structure And Thermal Properties Of Lignins: Characterization By Infrared Spectroscopy And Differential Scanning Calorimetry10.4067/S0717-97072009000400030 ↗
39. Polymer crystallization by chemical nucleation10.1038/304432a0 ↗
40. Crystallization and melting behavior of poly(L-lactic acid)10.1021/ma070082c ↗
41. Melt preparation and nucleation efficiency of polylactide stereocomplex crystallites10.1016/j.polymer.2006.01.062 ↗
42. Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA)10.1016/j.eurpolymj.2017.04.041 ↗
43. Synthesis and characterization of triblock copolymer PLA-b-PBT-b-PLA and its effect on the crystallization of PLA10.1039/c3ra42096e ↗
44. Synthesis and Thermal Studies of Chitin/AgCl Nanocomposite10.1016/j.mspro.2014.07.411 ↗