journal article·2023-05-08Open access

CaSiO3-HAp Metal-Reinforced Biocomposite Ceramics for Bone Tissue Engineering

Evgeniy K. Papynov, Oleg O. Shichalin, Anton A. Belov, Igor Yu Buravlev, Vitaly Yu Mayorov, Alexander N. Fedorets, Anastasiya A. Buravleva, Alexey O. Lembikov, Danila V. Gritsuk, Olesya V. Kapustina, Zlata E. Kornakova

Abstract

Reconstructive and regenerative bone surgery is based on the use of high-tech biocompatible implants needed to restore the functions of the musculoskeletal system of patients. Ti6Al4V is one of the most widely used titanium alloys for a variety of applications where low density and excellent corrosion resistance are required, including biomechanical applications (implants and prostheses). Calcium silicate or wollastonite (CaSiO3) and calcium hydroxyapatite (HAp) is a bioceramic material used in biomedicine due to its bioactive properties, which can potentially be used for bone repair. In this regard, the research investigates the possibility of using spark plasma sintering technology to obtain new CaSiO3-HAp biocomposite ceramics reinforced with a Ti6Al4V titanium alloy matrix obtained by additive manufacturing. The phase and elemental compositions, structure, and morphology of the initial CaSiO3-HAp powder and its ceramic metal biocomposite were studied by X-ray fluorescence, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer–Emmett–Teller analysis methods. The spark plasma sintering technology was shown to be efficient for the consolidation of CaSiO3-HAp powder in volume with a Ti6Al4V reinforcing matrix to obtain a ceramic metal biocomposite of an integral form. Vickers microhardness values were determined for the alloy and bioceramics (~500 and 560 HV, respectively), as well as for their interface area (~640 HV). An assessment of the critical stress intensity factor KIc (crack resistance) was performed. The research result is new and represents a prospect for the creation of high-tech implant products for regenerative bone surgery.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Far Eastern Federal University, 10 Ajax Bay, Russky Island, 690922 Vladivostok, Russia

Funding

Russian Science Foundation

References (41)

Show source-provided references
1. A Review on the Role of Wollastonite Biomaterial in Bone Tissue Engineering10.1155/2022/4996530 ↗
2. Phase Pure, High Hardness, Biocompatible Calcium Silicates with Excellent Anti-Bacterial and Biofilm Inhibition Efficacies for Endodontic and Orthopaedic Applications10.1016/j.jmbbm.2018.06.046 ↗
3. Wear and Corrosion Properties of Wollastonite and Boron Nitride Doped, Hydroxyapatite-Based HAp-Wo-BN Composite Coatings Prepared by Pulsed Laser Deposition10.1016/j.ceramint.2021.08.196 ↗
4. Selective Laser Sintered Bio-Inspired Silicon-Wollastonite Scaffolds for Bone Tissue Engineering10.1016/j.msec.2020.111223 ↗
5. A Comparative Study of Physico-Mechanical, Bioactivity and Hemolysis Properties of Pseudo-Wollastonite and Wollastonite Glass-Ceramic Synthesized from Solid Wastes10.1016/j.ceramint.2019.09.039 ↗
6. Synthetic Nanostructured Wollastonite: Composition, Structure and “In Vitro” Biocompatibility Investigation10.1016/j.ceramint.2021.04.258 ↗
7. Wollastonite Toxicity: An Update10.3109/08958378.2013.857372 ↗
8. Fabrication and Characterization of Hydroxyapatite/Wollastonite Composite Bioceramics with Controllable Properties for Hard Tissue Repair10.1111/j.1551-2916.2010.04046.x ↗
9. Preparation and in Vitro Apatite-Forming Ability of Hydroxyapatite and β-Wollastonite Composite Materials10.1016/j.ceramint.2018.06.251 ↗
10. Sol-Gel (Template) Synthesis of Osteoplastic CaSiO3/HAp Powder Biocomposite: “In Vitro” and “In Vivo” Biocompatibility Assessment10.1016/j.powtec.2020.04.040 ↗
11. Apanasevich, V., Papynov, E., Plekhova, N., Zinoviev, S., Kotciurbii, E., Stepanyugina, A., Korshunova, O., Afonin, I., Evdokimov, I., and Shichalin, O. (2020). Morphological Characteristics of the Osteoplastic Potential of Synthetic CaSiO3/HAp Powder Biocomposite. J. Funct. Biomater., 11.10.3390/jfb11040068 ↗
12. Ingole, V.H.H., Sathe, B., and Ghule, A.V.V. (2018). Bioactive Ceramic Composite Material Stability, Characterization, and Bonding to Bone. Fundam. Biomater. Ceram., 273–296.10.1016/B978-0-08-102203-0.00012-3 ↗
13. Scaffolds Containing Chitosan/Carboxymethyl Cellulose/Mesoporous Wollastonite for Bone Tissue Engineering10.1016/j.ijbiomac.2015.07.016 ↗
14. Processing and Characterization of Poly (Butylene Adipate-Co-Terephthalate)/Wollastonite Biocomposites for Medical Applications10.1016/j.matpr.2017.11.279 ↗
15. Enhanced Phase Stability in Hydroxylapatite/Zirconia Composites with Hot Isostatic Pressing10.1016/j.ceramint.2010.11.001 ↗
16. Challenges and Advances in Nanocomposite Processing Techniques10.1016/j.mser.2006.11.002 ↗
17. Corrosion Behavior and In-Vitro Bioactivity of Porous Mg/Al2O3 and Mg/Si3N4 Metal Matrix Composites Fabricated Using Microwave Sintering Process10.1016/j.matchemphys.2019.01.007 ↗
18. Tokita, M. (2013). Handbook of Advanced Ceramics, Elsevier.
19. Olevsky, E.A. (2017). Spark-Plasma Sintering and Related Field-Assisted Powder Consolidation Technologies, MDPI.
20. A Review of Multi-Physical Fields Induced Phenomena and Effects in Spark Plasma Sintering: Fundamentals and Applications10.1016/j.matdes.2020.108662 ↗
21. Application of Carbonaceous Template for Porous Structure Control of Ceramic Composites Based on Synthetic Wollastonite Obtained via Spark Plasma Sintering10.1016/j.ceramint.2014.09.045 ↗
22. Synthetic CaSiO3 Sol-Gel Powder and SPS Ceramic Derivatives: “In Vivo” Toxicity Assessment10.1016/j.pnsc.2019.07.004 ↗
23. Wollastonite Ceramics with Bimodal Porous Structures Prepared by Sol–Gel and SPS Techniques10.1039/C6RA04956G ↗
24. Sol-Gel and SPS Combined Synthesis of Highly Porous Wollastonite Ceramic Materials with Immobilized Au-NPs10.1016/j.ceramint.2017.03.207 ↗
25. CaSiO3-HAp Structural Bioceramic by Sol-Gel and SPS-RS Techniques: Bacteria Test Assessment10.3390/jfb11020041 ↗
26. Reactive Spark Plasma Synthesis of Porous Bioceramic Wollastonite10.1134/S0036023620020138 ↗
27. Influence of Porosity on Mechanical Properties and in Vivo Response of Ti6Al4V Implants10.1016/j.actbio.2009.11.011 ↗
28. Microstructure and Mechanical Behavior of Ti-6Al-4V Produced by Rapid-Layer Manufacturing, for Biomedical Applications10.1016/j.jmbbm.2008.05.004 ↗
29. Microstructure and Mechanical Behavior of Porous Ti-6Al-4V Parts Obtained by Selective Laser Melting10.1016/j.jmbbm.2013.05.011 ↗
30. Ti–6Al–4V Triply Periodic Minimal Surface Structures for Bone Implants Fabricated via Selective Laser Melting10.1016/j.jmbbm.2015.06.024 ↗
31. Rahmani, R., Rosenberg, M., Ivask, A., and Kollo, L. (2019). Comparison of Mechanical and Antibacterial Properties of TiO2/Ag Ceramics and Ti6al4v-TiO2/Ag Composite Materials Using Combined SLM-SPS Techniques. Metals, 9.10.3390/met9080874 ↗
32. High Virucidal Potential of Novel Ceramic–Metal Composites Fabricated via Hybrid Selective Laser Melting and Spark Plasma Sintering Routes10.1007/s00170-022-08878-x ↗
33. Rahmani, R., Antonov, M., Kollo, L., Holovenko, Y., and Prashanth, K.G. (2019). Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications. Appl. Sci., 9.10.3390/app9183844 ↗
34. Hydroxyapatite-Past, Present, and Future in Bone Regeneration
35. Overview of Hydroxyapatite: Composition, Structure, Synthesis Methods and Its Biomedical Uses
36. Multifunctional Hydroxyapatite Composites for Orthopedic Applications: A Review10.1021/acsbiomaterials.2c00140 ↗
37. Functionalized Porous Hydroxyapatite Scaffolds for Tissue Engineering Applications: A Focused Review10.1021/acsbiomaterials.1c00438 ↗
38. Density Functional Theory Methods for Characterization of Porous Materials10.1016/j.colsurfa.2013.01.007 ↗
39. Additive Manufacturing of Ti6Al4V Alloy: A Review10.1016/j.matdes.2018.107552 ↗
40. Systematical Evaluation of Mechanically Strong 3D Printed Diluted Magnesium Doping Wollastonite Scaffolds on Osteogenic Capacity in Rabbit Calvarial Defects
41. Facile Fabrication of 3D-Printed Porous Ti6Al4V Scaffolds with a Sr-CaP Coating for Bone Regeneration10.1021/acsomega.1c05908 ↗