Dental Poly(methyl methacrylate)-Based Resin Containing a Nanoporous Silica Filler
Source abstract
Abstract
Poly(methyl methacrylate) (PMMA)-based resins have been conventionally used in dental prostheses owing to their good biocompatibility. However, PMMA-based resins have relatively poor mechanical properties. In the present study, a novel nanoporous silica filler was developed and introduced into PMMA-based resins to improve their mechanical properties. The filler was prepared by sintering a green body composed of silica and an organic binder, followed by grinding to a fine powder and subsequent silanization. The filler was added to photocurable PMMA-based resin, which was prepared from MMA, PMMA, ethylene glycol dimethacrylate, and a photo-initiator. The filler was characterized by scanning electron microscopy (SEM), X-ray diffraction analysis, nitrogen sorption porosimetry, and Fourier transform infrared (FT-IR) spectroscopy. The PMMA-based resins were characterized by SEM and FT-IR, and the mechanical properties (Vickers hardness, flexural modulus, and flexural strength) and physicochemical properties (water sorption and solubility) were evaluated. The results suggested that the filler consisted of microparticles with nanopores. The filler at 23 wt % was well dispersed in the PMMA-based resin matrix. The mechanical and physicochemical properties of the PMMA-based resin improved significantly with the addition of the developed filler. Therefore, such filler-loaded PMMA-based resins are potential candidates for improving the strength and durability of polymer-based crown and denture base.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Oral Reconstruction and Rehabilitation, Department of Oral Functions, Kyushu Dental University, Kitakyushu 803-8580, Japan
Division of Biomaterials, Department of Oral Functions, Kyushu Dental University, Kitakyushu 803-8580, Japan
Funding
Japan Society for the Promotion of Science · The Japanese Association for Dental Science
References (51)
Show source-provided references
1. Biocompatibility of polymethylmethacrylate resins used in dentistry10.1002/jbm.b.32673 ↗
2. Zafar, M.S. (2020). Prosthodontic applications of polymethyl methacrylate (PMMA): An update. Polymers, 12.10.3390/polym12102299 ↗
3. Pituru, S.M., Greabu, M., Totan, A., Imre, M., Pantea, M., Spinu, T., Tancu, A.M.C., Popoviciu, N.O., Stanescu, I.I., and Ionescu, E. (2020). A review on the biocompatibility of PMMA-based dental materials for interim prosthetic restorations with a glimpse into their modern manufacturing techniques. Materials, 13.10.3390/ma13132894 ↗
4. Alhotan, A., Yates, J., Zidan, S., Haider, J., and Silikas, N. (2021). Assessing fracture toughness and impact strength of PMMA reinforced with nano-particles and fibre as advanced denture base materials. Materials, 14.10.3390/ma14154127 ↗
5. Cascione, M., De Matteis, V., Pellegrino, P., Albanese, G., De Giorgi, M.L., Paladini, F., Corsalini, M., and Rinaldi, R. (2021). Improvement of PMMA dental matrix performance by addition of titanium dioxide nanoparticles and clay nanotubes. Nanomaterials, 11.10.3390/nano11082027 ↗
6. PMMA denture base material enhancement: A review of fiber, filler, and nanofiller addition10.2147/IJN.S130722 ↗
7. Aldegheishem, A., AlDeeb, M., Al-Ahdal, K., Helmi, M., and Alsagob, E.I. (2021). Influence of reinforcing agents on the mechanical properties of denture base resin: A systematic review. Polymers, 13.10.3390/polym13183083 ↗
8. Effect of thermal cycling on flexural properties of microcrystalline cellulose-reinforced denture base acrylic resins10.1111/jopr.13018 ↗
9. PMMA/double-modified organoclay nanocomposites as fillers for denture base materials with improved mechanical properties10.1016/j.jmbbm.2018.09.033 ↗
10. Effect of different amounts of 3-methacryloxypropyltrimethoxysilane on the flexural properties and wear resistance of alumina reinforced PMMA10.4012/dmj.2012-056 ↗
11. Reinforcement of denture base PMMA with ZrO2 nanotubes10.1016/j.jmbbm.2014.01.003 ↗
12. The synthesis, modification, and application of nanosilica in polymethyl methacrylate denture base10.4012/dmj.2017-142 ↗
13. Evaluation of flexural strength of different denture base materials reinforced with different nanoparticles10.1111/jopr.12974 ↗
14. The effect of silica and prepolymer nanoparticles on the mechanical properties of denture base acrylic resin10.1111/jopr.12573 ↗
15. Fluoride release, recharge and flexural properties of polymethylmethacrylate containing fluoridated glass fillers10.1111/adj.12168 ↗
16. Liu, J., Zhang, H., Sun, H., Liu, Y., Liu, W., Su, B., and Li, S. (2021). The development of filler morphology in dental resin composites: A review. Materials, 14.10.3390/ma14195612 ↗
17. The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites10.1016/j.dental.2005.04.027 ↗
18. Mechanical properties of experimental dental composites containing a combination of mesoporous and nonporous spherical silica as fillers10.1016/j.dental.2008.07.012 ↗
19. Nano-porous thermally sintered nano silica as novel fillers for dental composites10.1016/j.dental.2011.10.015 ↗
20. Synthesis of wrinkled mesoporous silica and its reinforcing effect for dental resin composites10.1016/j.dental.2017.07.012 ↗
21. Size-controllable synthesis of dendritic porous silica as reinforcing fillers for dental composites10.1016/j.dental.2021.02.015 ↗
22. (2020). Dentistry—Polymer-Based Crown and Veneering Materials. Standard No. ISO 10477: 2018.
23. Degree of conversion of a copolymer of an experimental monomer and methyl methacrylate for dental applications10.1002/app.20654 ↗
24. Hata, K., Ikeda, H., Nagamatsu, Y., Masaki, C., Hosokawa, R., and Shimizu, H. (2021). Development of dental poly(methyl methacrylate)-based resin for stereolithography additive manufacturing. Polymers, 13.10.3390/polym13244435 ↗
25. Quantitative monomolecular coverage of inorganic particulates by methacryl-functional silanes10.1016/0039-6028(84)90600-9 ↗
26. Filler-coupling agent-matrix interactions in silica/polymethylmethacrylate composites10.1002/1097-4636(20011205)57:3<384::AID-JBM1181>3.0.CO;2-F ↗
27. Effect of the amount of 3-methacyloxypropyltrimethoxysilane coupling agent on physical properties of dental resin nanocomposites10.1016/j.dental.2009.03.016 ↗
28. Wnuczek, K., Puszka, A., Klapiszewski, L., and Podkoscielna, B. (2021). Preparation, thermal, and thermo-mechanical characterization of polymeric blends based on di(meth)acrylate monomers. Polymers, 13.10.3390/polym13060878 ↗
29. Microscopic structure of nanometer-sized silica particles10.1103/PhysRevB.69.155409 ↗
30. Formation and photoluminescence characterization of transparent silica glass prepared by solid-phase reaction of nanometer-sized silica particles10.1021/jp072312v ↗
31. Preparation of silica-poly(methyl methacrylate) composite with a nanoscale dual-network structure and hardness comparable to human enamel10.1016/j.dental.2019.03.006 ↗
32. Resin composite—State of the art10.1016/j.dental.2010.10.020 ↗
33. Inorganic fillers for dental resin composites: Present and future10.1021/acsbiomaterials.5b00401 ↗
34. Nanoparticles in dentistry10.1016/j.dental.2017.08.193 ↗
35. Influence of the cross-linking agent on mechanical properties of PMMA powder with compromised particle morphology10.1016/j.ortho.2017.03.007 ↗
36. Comparison of the accuracy of fixture-level implant impression making with different splinting techniques10.1155/2021/2959055 ↗
37. Photopolymerization kinetics of multifunctional monomers10.1016/S0079-6700(01)00004-1 ↗
38. Tomal, W., and Ortyl, J. (2020). Water-soluble photoinitiators in biomedical applications. Polymers, 12.10.32545/encyclopedia202006.0005.v9 ↗
39. Effect of pressure, post-pressing time, and polymerization cycle on the degree of conversion of thermoactivated acrylic resin10.1155/2018/5743840 ↗
40. Bulk-fill resin composites: Polymerization properties and extended light curing10.1016/j.dental.2014.12.010 ↗
41. Effect of untreated zirconium oxide nanofiller on the flexural strength and surface hardness of autopolymerized interim fixed restoration resins10.1111/jerd.12300 ↗
42. Alhotan, A., Yates, J., Zidan, S., Haider, J., and Silikas, N. (2021). Flexural strength and hardness of filler-reinforced PMMA targeted for denture base application. Materials, 14.10.3390/ma14102659 ↗
43. Mechanical and thermal properties of denture PMMA reinforced with silanized aluminum borate whiskers10.4012/dmj.2012-016 ↗
44. Release of residual methyl methacrylate into water from glass fibre-poly(methyl methacrylate) composite used in dentures10.1016/S0142-9612(96)00123-8 ↗
45. Effect of PMMA filler particles addition on the physical properties of resin composite10.4012/dmj.2009-141 ↗
46. Alhotan, A., Yates, J., Zidan, S., Haider, J., Jurado, C.A., and Silikas, N. (2021). Behaviour of PMMA resin composites incorporated with nanoparticles or fibre following prolonged water storage. Nanomaterials, 11.10.3390/nano11123453 ↗
47. Response of two gingival cell lines to CAD/CAM composite blocks10.1016/j.dental.2020.05.014 ↗
48. A feasibility study for 3D-printed poly(methyl methacrylate)-resin tracheostomy tube using a hamster cheek pouch model10.21873/invivo.11968 ↗
49. Activation of stress-regulated transcription factors by triethylene glycol dimethacrylate monomer10.1016/j.biomaterials.2010.11.031 ↗
50. Function of MAPK and downstream transcription factors in monomer-induced apoptosis10.1016/j.biomaterials.2011.10.026 ↗
51. Update on dental nanocomposites10.1177/0022034510363765 ↗