journal article·2022-06-05Open access

In Vivo Evaluation of 3D-Printed Silica-Based Bioactive Glass Scaffolds for Bone Regeneration

Dilshat U. Tulyaganov, Elisa Fiume, Avzal Akbarov, Nigora Ziyadullaeva, Saidazim Murtazaev, Abbas Rahdar, Jonathan Massera, Enrica Verné, Francesco Baino

Abstract

Bioactive glasses are often designed as porous implantable templates in which newly-formed bone can grow in three dimensions (3D). This research work aims to investigate the bone regenerative capability of silicate bioactive glass scaffolds produced by robocasting in comparison with powder and granule-like materials (oxide system: 47.5SiO2-10Na2O-10K2O-10MgO-20CaO-2.5P2O5, mol.%). Morphological and compositional analyses performed by scanning electron microscopy (SEM), combined with energy dispersive spectroscopy (EDS) after the bioactivity studies in a simulated body fluid (SBF) confirmed the apatite-forming ability of the scaffolds, which is key to allowing bone-bonding in vivo. The scaffolds exhibited a clear osteogenic effect upon implantation in rabbit femur and underwent gradual resorption followed by ossification. Full resorption in favor of new bone growth was achieved within 6 months. Osseous defect healing was accompanied by the formation of mature bone with abundant osteocytes and bone marrow cells. These in vivo results support the scaffold’s suitability for application in bone tissue engineering and show promise for potential translation to clinical assessment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Natural-Mathematical Sciences, Turin Polytechnic University in Tashkent, Tashkent 100095, Uzbekistan

Department of Applied Science and Technology (DISAT), Politecnico di Torino, 10129 Turin, Italy

Department of Prosthodontics, Tashkent State Dental Institute, Tashkent 100047, Uzbekistan

Department of Physics, University of Zabol, Zabol 98613-35856, Iran

Faculty of Medicine and Health Technology, Tampere University, 33100 Tampere, Finland

References (46)

Show source-provided references
1. Bone grafts and biomaterials substitutes for bone defect repair: A review
2. Synthetic bone graft substitutes10.1046/j.1440-1622.2001.02128.x ↗
3. Bone Regeneration Based on Tissue Engineering Conceptions-A 21st Century Perspective10.4248/BR201303002 ↗
4. Hard tissue regeneration using bone substitutes: An update on innovations in materials10.3904/kjim.2015.30.3.279 ↗
5. Scaffolds for Bone Tissue Engineering: State of the art and new perspectives10.1016/j.msec.2017.05.017 ↗
6. Wagner, W., Sakiyama-Elbert, S., Zhang, G., and Yaszemski, M. (2020). Biomaterials Science—An Introduction to Materials in Medicine, Academic Press. [4th ed.].
7. Animal models for implant biomaterial research in bone: A review10.22203/eCM.v013a01 ↗
8. Bone defect animal models for testing efficacy of bone substitute biomaterials
9. Chen, X., Fan, H., Deng, X., Wu, L., Yi, T., Gu, L., and Zhang, X. (2018). Scaffold structural microenvironmental cues to guide tissue regeneration in bone tissue applications. Nanomaterials, 8.10.3390/nano8110960 ↗
10. Order versus Disorder: In vivo bone formation within osteoconductive scaffolds10.1038/srep00274 ↗
11. Singh, S., Prakash, C., and Singh, R. (2020). Additive manufacturing in bone tissue engineering. 3D Printing in Biomedical Engineering. Materials Horizons: From Nature to Nanomaterials, Springer.10.1007/978-981-15-5424-7 ↗
12. 3D printing of Cu-doped bioactive glass composite scaffolds promotes bone regeneration through activating the HIF-1α and TNF-α pathway of hUVECs10.1039/D1BM00870F ↗
13. Three-dimensional printed strontium-containing mesoporous bioactive glass scaffolds for repairing rat critical-sized calvarial defects10.1016/j.actbio.2014.10.015 ↗
14. Mesoporous bioactive glass-coated 3D printed borosilicate bioactive glass scaffolds for improving repair of bone defects10.7150/ijbs.23872 ↗
15. Abarrategi, A., Moreno-Vicente, C., Martínez-Vázquez, F.J., Civantos, A., Ramos, V., Sanz-Casado, J.V., and López-Lacomba, J.L. (2012). Biological Properties of Solid Free Form Designed Ceramic Scaffolds with BMP-2: In Vitro and In Vivo Evaluation. PLoS ONE, 7.10.1371/journal.pone.0034117 ↗
16. Barberi, J., Baino, F., Fiume, E., Orlygsson, G., Nommeots-Nomm, A., Massera, J., and Verné, E. (2019). Robocasting of SiO2-based bioactive glass scaffolds with porosity gradient for bone regeneration and potential load-bearing applications. Materials, 12.10.3390/ma12172691 ↗
17. Robocasting of Bioactive SiO2-P2O5-CaO-MgO-Na2O-K2O Glass Scaffolds10.1155/2019/5153136 ↗
18. Mechanical characterization of pore-graded bioactive glass scaffolds produced by robocasting10.1515/bglass-2019-0012 ↗
19. Fiume, E., Tulyaganov, D.U., Akbarov, A., Ziyadullaeva, N., Cochis, A., Scalia, A.C., and Baino, F. (2021). Biological evaluation of a new sodium-potassium silico-phosphate glass for bone regeneration: In vitro and in vivo studies. Materials, 14.10.3390/ma14164546 ↗
20. Fiume, E., Serino, G., Bignardi, C., Verné, E., and Baino, F. (2019). Bread-derived bioactive porous scaffolds: An innovative and sustainable approach to bone tissue engineering. Molecules, 24.10.3390/molecules24162954 ↗
21. Crystallization behavior of SiO2–P2O5–CaO–MgO–Na2O–K2O bioactive glass powder10.1515/bglass-2019-0004 ↗
22. Comprehensive assessment of bioactive glass and glass-ceramic scaffold permeability: Experimental measurements by pressure wave drop, modelling and computed tomography-based analysis10.1016/j.actbio.2020.10.027 ↗
23. Fiume, E., Serino, G., Bignardi, C., Verné, E., and Baino, F. (2020). Sintering Behavior of a Six-Oxide Silicate Bioactive Glass for Scaffold Manufacturing. Appl. Sci., 10.10.3390/app10228279 ↗
24. Fiume, E., Migneco, C., Verné, E., and Baino, F. (2020). Comparison between Bioactive Sol-Gel and Melt-Derived Glasses/Glass-Ceramics Based on the Multicomponent SiO2–P2O5–CaO–MgO–Na2O–K2O System. Materials, 13.10.3390/ma13030540 ↗
25. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
26. Bancroft, J.D., and Stevens, A. (1990). The haematoxylins. Theory and Practice of Histological Techniques, Churchill Livingstone. Theory and Practice of Histological Techniques.
27. Fischer, A.H., Jacobson, K.A., Rose, J., and Zeller, R. (2006). Hematoxylin and eosin staining of tissue and cell sections. Basic Methods in Microscopy, Cold Spring Harbor Laboratory Press. Chapter 4.
28. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
29. A unified in vitro evaluation for apatite-forming ability of bioactive glasses and their variants10.1007/s10856-015-5403-9 ↗
30. Bioactive glass in cavitary bone defects: A comparative experimental study in rabbits10.1590/1413-785220152304147538 ↗
31. Bellucci, D., Cannillo, V., Anesi, A., Salvatori, R., Chiarini, L., Manfredini, T., and Zaffe, D. (2018). Bone Regeneration by Novel Bioactive Glasses Containing Strontium and/or Magnesium: A Preliminary In-Vivo Study. Materials, 11.10.3390/ma11112223 ↗
32. The Mann-Whitney U: A Test for Assessing Whether Two Independent Samples Come from the Same Distribution10.20982/tqmp.04.1.p013 ↗
33. Bioactive glass: Mechanisms of bone bonding
34. Dose-dependent behavior of bioactive glass dissolution10.1002/jbm.10053 ↗
35. Bioactivity and dissolution behavior of boron-containing bioactive glasses under static and dynamic conditions in different media10.1515/bglass-2019-0011 ↗
36. Ordered mesoporous bioactive glasses for bone tissue regeneration10.1021/cm060488o ↗
37. Fe-doped bioactive glass-derived scaffolds produced by sol-gel foaming10.1016/j.matlet.2018.10.042 ↗
38. Design, selection and characterization of novel glasses and glass-ceramics for use in prosthetic applications10.1016/j.ceramint.2015.09.094 ↗
39. Vascularization and osteogenesis in ectopically implanted bone tissue-engineered constructs with endothelial and osteogenic differentiated adipose-derived stem cells10.4252/wjsc.v13.i1.91 ↗
40. Chitosan–alginate hybrid scaffolds for bone tissue engineering10.1016/j.biomaterials.2004.09.062 ↗
41. In vivo evaluation of a novel porous 3D scaffold10.2147/IJN.S145663 ↗
42. Allograft bone matrix versus synthetic bone graft substitutes10.1016/j.injury.2011.06.199 ↗
43. Woven bone overview: Structural classification based on its integral role in development, repairand pathological bone formation throughout vertebrate groups10.22203/eCM.v038a11 ↗
44. Multiscale analyses reveal native-like lamellar bone repair and near perfect bone-contact with porous strontium-loaded bioactive glass10.1016/j.biomaterials.2019.03.035 ↗
45. Processing methods for making porous bioactive glass-based scaffolds—A state of the art review10.1111/ijac.13195 ↗
46. Highly degradable porous melt-derived bioactive glass foam scaffolds for bone regeneration10.1016/j.actbio.2017.04.030 ↗