Evaluation of Clinical Performance of TiNi-Based Implants Used in Chest Wall Repair after Resection for Malignant Tumors
Source abstract
Abstract
In this study, we assessed the outcomes after surgical treatment of thoracic post-excision defects in 15 patients, using TiNi knitted surgical meshes and customized artificial TiNi-based ribs. Methods: Eight patients were diagnosed with advanced non-small cell lung cancer (NSCLC) invading the chest wall, of which five patients were T3N0M0, two were T3N1M0, and one was T3N2M0. Squamous cell carcinoma was identified in three of these patients and adenocarcinoma in five. In two cases, chest wall resection and repair were performed for metastases of kidney cancer after radical nephrectomy. Three-dimensional CT reconstruction and X-ray scans were used to plan the surgery and customize the reinforcing TiNi-based implants. All patients received TiNi-based devices and were prospectively followed for a few years. Results: So far, there have been no lethal outcomes, and all implanted devices were consistent in follow-up examinations. Immediate complications were noted in three cases (ejection of air through the pleural drains, paroxysm of atrial fibrillation, and pleuritis), which were conservatively managed. In the long term, no complications, aftereffects, or instability of the thoracic cage were observed. Conclusion: TiNi-based devices used for extensive thoracic lesion repair in this context are promising and reliable biomaterials that demonstrate good functional, clinical, and cosmetic outcomes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Pectus Deformity Diagnosis and Treatment · Surgical site infection prevention · Tracheal and airway disorders
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Medical Materials, Tomsk State University, 634045 Tomsk, Russia
Department of Surgery, Siberian State Medical University, 634050 Tomsk, Russia
R&D Center, TiNiKo Co., Ochang 28119, Korea
Boramae Medical Center, Seoul National University Hospital, Seoul 07061, Korea
Department of Physical Metallurgy and Materials Technology, Brandenburg University of Technology, 03-046 Cottbus, Germany
Funding
The Ministry of Education and Science of the Russian Federation
References (39)
Show source-provided references
1. Review of chest wall tumors: A diagnostic, therapeutic, and reconstructive challenge10.1055/s-0031-1275167 ↗
2. Tumors of the rib10.1016/j.diii.2013.05.006 ↗
3. Surgical resection of secondary chest wall tumors10.1055/s-2005-837649 ↗
4. Extensive abdominal and chest wall resection and reconstruction for invasive squamous cell carcinoma of the skin10.21037/jtd.2019.08.08 ↗
5. MR imaging of chest wall tumors10.1016/j.mric.2015.01.007 ↗
6. R0 resection and reconstruction for a large, rapidly progressive chest wall sarcoma10.1186/s13019-018-0812-8 ↗
7. Chest wall resection and reconstruction for lung cancer: Surgical techniques and example of integrated multimodality approach10.21037/jtd.2019.07.81 ↗
8. Chest wall reconstruction without prosthetic material10.1016/j.thorsurg.2017.01.010 ↗
9. Sternochondral replacement: Use of cadaveric allograft for the reconstruction of ante-rior chest wall10.21037/jtd.2019.07.82 ↗
10. Anterior chest wall resection and sternal body wedge for primary chest wall tumor: Recon-struction technique with biological meshes and titanium plates10.21037/jtd.2019.06.45 ↗
11. Materials and techniques in chest wall reconstruction: A review10.21037/jovs.2017.06.10 ↗
12. Chest wall reconstruction after extended resection10.21037/jtd.2016.11.07 ↗
13. Reconstruction of anterior chest wall: A clinical analysis10.1186/s13019-018-0810-x ↗
14. Tridimensional titanium-printed custom-made prosthesis for sternocostal re-construction10.1093/ejcts/ezv265 ↗
15. Implantation of a 3D-printed titanium sternum in a patient with a sternal tumor10.1186/s12957-018-1315-8 ↗
16. Chest-wall reconstruction with a customized titanium-alloy prosthesis fabricated by 3D printing and rapid prototyping10.1186/s13019-017-0692-3 ↗
17. Necessity of pleura repair in the chest wall reconstruction with three-dimensional printed tita-nium implant10.21037/jtd.2020.04.53 ↗
18. Results of chest wall resection and reconstruction with and without rigid prosthesis10.1016/j.athoracsur.2005.07.001 ↗
19. Experience with titanium devices for rib fixation and coverage of chest wall defects10.1093/icvts/ivs327 ↗
20. Titanium plates and Dualmesh: A modern combination for reconstructing very large chest wall defects10.1016/j.athoracsur.2011.02.014 ↗
21. The painless combination of anatomically contoured titanium plates and porcine dermal collagen patch for chest wall reconstruction10.21037/jtd.2018.04.116 ↗
22. Effects of statherin on the biological properties of titanium metals subjected to different surface modification10.1016/j.colsurfb.2020.110783 ↗
23. Comparison of different surface modifications for titanium implants installed into the goat iliac crest
24. Sparing surgery with the use of TiNi-based endografts in larynx cancer pa-tients10.1002/jso.23779 ↗
25. Shtin, V., Novikov, V., Chekalkin, T., Gunther, V., Marchenko, E., Choynzonov, E., Kang, S.B., Chang, M.J., Kang, J.H., and Obrosov, A. (2019). Repair of orbital post-traumatic wall defects by custom-made TiNi mesh endografts. J. Funct. Biomater., 10.10.3390/jfb10030027 ↗
26. Fertility-sparing surgery using knitted TiNi mesh implants and sentinel lymph nodes: A 10-year experience10.1080/08941939.2020.1745965 ↗
27. Sparing surgery for the successful treatment of thyroid papillary carcinoma invading the trachea: A case report10.1159/000452790 ↗
28. Study of the knitted TiNi mesh graft in a rabbit cranioplasty model10.1088/2057-1976/ab0693 ↗
29. Yasenchuk, Y., Marchenko, E., Gunther, V., Radkevich, A., Kokorev, O., Gunther, S., Baigonakova, G., Hodorenko, V., Chekalkin, T., and Kang, J.H. (2019). Biocompatibility and clinical application of porous TiNi alloys made by self-propagating high-temperature synthesis (SHS). Materials, 12.10.3390/ma12152405 ↗
30. Study on tensile, bending, fatigue, and in vivo behavior of porous SHS-TiNi alloy used as a bone substitute10.1088/1748-605X/aba327 ↗
31. Formation of pores and amorphous-nanocrystalline phases in porous TiNi alloys made by self-propagating high-temperature synthesis (SHS)10.1016/j.apt.2018.12.011 ↗
32. Formation of mineral phases in self-propagating high-temperature synthesis (SHS) of porous TiNi alloy10.1088/2053-1591/ab01a1 ↗
33. Evaluation of allogenic hepato-tissue engineered in porous TiNi-based scaffolds for liver regeneration in a CCl4-induced cirrhosis rat model10.1088/2057-1976/aae974 ↗
34. Exploring the role of surface modifications of TiNi-based alloys in evaluating in vitro cytocompatibility: A comparative study10.1088/2051-672X/abc0f9 ↗
35. Combustion synthesis porous Nitinol for biomedical applications10.1155/2019/4307461 ↗
36. The replacement of postresectional defects of the thorax with the use of tissue im-plant of nanostructural nickelid-titan thread
37. Reconstruction of the chest wall using titanium-nickelid for cancer patients
38. Treatment of a patient with sarcoma of sternum, ribs and invasion into peri-card and pleura
39. Construct validity of the Enneking score for measuring function in patients with malignant or aggressive benign tumours of the upper limb10.1302/0301-620X.89B5.18498 ↗