Impact of Bi2O3 and ZrO2 Radiopacifiers on the Early Hydration and C–S–H Gel Structure of White Portland Cement
Source abstract
Abstract
Bismuth oxide (monoclinic α-Bi2O3) and zirconium oxide (monoclinic ZrO2) are the most popular radiopacifiers in commercial Portland cement-based endodontic restoratives, yet their effects on the setting and hydration reactions are not fully understood. This study compares the impact of 20 wt.% of Bi2O3 or ZrO2 on the early hydration reactions and C–S–H gel structure of white Portland cement (WPC). Cement paste samples were hydrated at 37.5 °C prior to analysis by 29Si and 27Al magic angle spinning nuclear magnetic resonance spectroscopy at 3 h and 24 h, and transmission electron microscopy at 3 h. Initial and final setting times were determined using a Vicat apparatus and reaction kinetics were monitored by isothermal conduction calorimetry. Bi2O3 was found to prolong initial and final setting times and retard the degree of hydration by 32% at 24 h. Heat evolution during the acceleration and deceleration phases of the hydration process was reduced and the exotherm arising from renewed ettringite formation was delayed and diminished in the presence of Bi2O3. Conversely, ZrO2 had no significant impact on either setting time; although, it accelerated hydration by 23% within 24 h. Increases in the mean silicate chain length and the extent of aluminum substitution in the C–S–H gel were observed in the presence of both radiopacifying agents after 24 h relative to those of the unblended WPC. The Bi2O3 and ZrO2 particles remained intact within the cement matrix and neither bismuth nor zirconium was chemically incorporated in the hydration products.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Drilling and Well Engineering · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China
Faculty of Engineering and Science, University of Greenwich, Chatham Maritime, Kent ME4 4TB, UK
References (40)
Show source-provided references
1. Mineral trioxide aggregate and other bioactive endodontic cements: An updated overview—Part I: Vital pulp therapy10.1111/iej.12841 ↗
2. Mineral trioxide aggregate and other bioactive endodontic cements: An updated overview—Part II: Other clinical applications and complications10.1111/iej.12843 ↗
3. Calcium silicate-based cements: Composition, properties, and clinical applications10.1111/jicd.12195 ↗
4. Effects of calcium silicate cements on dental pulp cells: A systematic review10.1016/j.jdent.2018.08.003 ↗
5. Endodontic sealers based on calcium silicates: A systematic review10.1007/s10266-018-0400-3 ↗
6. Calcium silicate bioactive cements: Biological perspectives and clinical applications10.1016/j.dental.2015.01.004 ↗
7. Ha, W.N., Nicholson, T., Kahler, B., and Walsh, L.J. (2017). Mineral trioxide aggregate—A review of properties and testing methodologies. Materials, 10.10.3390/ma10111261 ↗
8. (2012). ISO 6876:2012 Dental Root Canal Sealing Materials, International Organization for Standardization. [3rd ed.].
9. (2000). ANSI/ADA Specification 57: Endodontic Sealing Material, American National Standards Institute/American Dental Association.
10. The impact of iodoform on the hydration, bioactivity and antimicrobial properties of white Portland cement10.1051/matecconf/201710904002 ↗
11. In vitro bioactivity and setting times of white Portland cement combined with different radio pacifying agents10.1051/matecconf/201710903003 ↗
12. Effect of titanium tetrafluoride addition on the physicochemical and antibacterial properties of Biodentine as intraorfice barrier10.1016/j.dental.2018.11.019 ↗
13. Addition of zirconium oxide to Biodentine increases radiopacity and does not alter its physicochemical and biological properties10.1590/1678-7757-2018-0429 ↗
14. Ytterbium oxide as radiopacifier of calcium silicate-based cements. Physicochemical and biological properties10.1590/0103-6440201802033 ↗
15. The influence of different radiopacifying agents on the radiopacity, compressive strength, setting time, and porosity of Portland cement10.1007/s00784-013-1130-0 ↗
16. Early hydration of white Portland cement in the presence of bismuth oxide10.1179/1743676112Y.0000000058 ↗
17. The impact of zirconium oxide radiopacifier on the early hydration behaviour of white Portland cement10.1016/j.msec.2012.09.009 ↗
18. Effect investigation of nanofillers on C-S-H gel structure with Si NMR10.1061/(ASCE)MT.1943-5533.0002559 ↗
19. Microparticulated and nanoparticulated zirconium oxide added to calcium silicate cement: Evaluation of physicochemical and biological properties
20. The hydration chemistry of ProRoot MTA10.4012/dmj.2014-309 ↗
21. Li, Q., Hurt, A.P., and Coleman, N.J. (2019). The Application of 29Si NMR Spectroscopy to the Analysis of Calcium Silicate-Based Cement Using Biodentine as an Example. J. Funct. Biomater., 10.10.3390/jfb10020025 ↗
22. Morphology of calcium silicate hydrate (C-S-H) gel: A molecular dynamic study10.1680/adcr.13.00079 ↗
23. Understanding silicate hydration from quantitative analyses of hydrating tricalcium silicates10.1038/ncomms10952 ↗
24. Silicate chain formation in the nanostructure of cement-based materials10.1063/1.2796171 ↗
25. Garg, N., Dai, Z., Enemark-Rasmussen, K., and Skibsted, J. (2015, January 13–16). Pozzolanic reactivity of thermally activated kaolinite and montmorillonite in Portland cement blends and their impact on the formed C-S-H phase. Proceedings of the 14th International Congress on the Chemistry of Cement, Beijing, China.
26. (2008). ASTM C191-08, Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM International.
27. Bensted, J., and Barnes, P. (2002). Hydration of Portland cement. Structure and Performance of Cements, Spon Press. [2nd ed.].
28. Taylor, H.F.W. (1990). Cement Chemistry, Academic Press.
29. Composition and structure of C-S-H in white Portland cement-20% metakaolin pastes hydrated at 25 °C10.1016/j.cemconres.2006.11.012 ↗
30. Nuclear magnetic resonance—A powerful tool in cement and concrete research10.1680/adcr.1990.3.11.105 ↗
31. Characterization of white Portland cement hydration and the C-S-H structure in the presence of sodium aluminate by 27Al and 29Si MAS NMR spectroscopy10.1016/j.cemconres.2003.10.009 ↗
32. Direct observations of aluminium guest ions in the silicate phases of cement minerals by 27Al MAS NMR spectroscopy10.1039/ft9949002095 ↗
33. Engelhardt, G., and Michel, D. (1987). High-Resolution Solid State NMR of Silicates and Zeolites, John Wiley & Sons.
34. Effect of temperature on C-S-H gel nanostructure in white cement10.1617/s11527-013-0156-8 ↗
35. Ruiz-Clavijo, A., Hurt, A.P., Kotha, A.K., and Coleman, N.J. (2019). Effect of calcium precursor on the bioactivity and biocompatibility of sol-gel-derived glasses. J. Funct. Biomater., 10.10.3390/jfb10010013 ↗
36. Insights into the mechanisms of nucleation and growth of C-S-H on fillers10.1617/s11527-017-1082-y ↗
37. Combined effect of chemical nature and fineness of mineral powders on Portland cement hydration10.1617/s11527-009-9519-6 ↗
38. Synthesis and study on ionic conductive (Bi1−x,Vx)O1.5−δ materials with a dual-phase microstructure10.3390/ma9110863 ↗
39. Physical-chemical properties of bismuth and bismuth oxides: Synthesis, characterization and applications
40. Effect of bismuth oxide radioopacifier content on the material properties of an endodontic Portland cement-based (MTA-like) system10.1016/j.joen.2006.11.018 ↗