journal article·2022-08-04Open access

Trilateral Multi-Functional Polyamide 12 Nanocomposites with Binary Inclusions for Medical Grade Material Extrusion 3D Printing: The Effect of Titanium Nitride in Mechanical Reinforcement and Copper/Cuprous Oxide as Antibacterial Agents

Nectarios Vidakis, Markos Petousis, Nikolaos Mountakis, Apostolos Korlos, Vassilis Papadakis, Amalia Moutsopoulou

Abstract

In this work, for the first time, polyamide 12 (PA12) nanocomposites with binary inclusions in material extrusion (MEX) 3D printing were developed. The aim was to achieve an enhanced mechanical response with the addition of titanium nitride (TiN) and antibacterial performance with the addition of copper (Cu) or cuprous oxide (Cu2O), towards the development of multi-functional nanocomposite materials, exploiting the 3D printing process benefits. The prepared nanocomposites were fully characterized for their mechanical properties. The thermal properties were also investigated. Morphological characterization was performed with atomic force microscopy (AFM) and scanning electron microscopy (SEM). The antibacterial performance was investigated with an agar-well diffusion screening process. Overall, the introduction of these nanofillers induced antibacterial performance in the PA12 matrix materials, while at the same time, the mechanical performance was significantly increased. The results of the study show high potential for expanding the areas in which 3D printing can be used.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, Hellenic Mediterranean University, Estavromenos, 71410 Heraklion, Greece

Department of Industrial Engineering and Management, International Hellenic University, 14th km, Thessaloniki-N. Moudania, Thermi, 57001 Thessaloniki, Greece

Institute of Molecular Biology and Biotechnology, Foundation for Research and Technology—Hellas, 71110 Heraklion, Greece

References (89)

Show source-provided references
1. Polyamide 66 microspheres metallised with in situ synthesised gold nanoparticles for a catalytic application10.1186/1556-276X-7-182 ↗
2. Synthesis, modification and optimization of titanate nanotubes-polyamide thin film nanocomposite (TFN) membrane for forward osmosis (FO) application10.1016/j.cej.2015.06.035 ↗
3. Review of surface treatment methods for polyamide films for potential application as smart packaging materials: Surface structure, antimicrobial and spectral properties10.1016/j.fpsl.2020.100475 ↗
4. Mechanical response assessment of antibacterial PA12/TiO2 3D printed parts: Parameters optimization through artificial neural networks modeling10.1007/s00170-022-09376-w ↗
5. Vidakis, N., Petousis, M., Velidakis, E., Korlos, A., Kechagias, J.D., Tsikritzis, D., and Mountakis, N. (2022). Medical-Grade Polyamide 12 Nanocomposite Materials for Enhanced Mechanical and Antibacterial Performance in 3D Printing Applications. Polymers, 14.10.3390/polym14030440 ↗
6. Li, Y.D., Guan, J.P., Tang, R.C., and Qiao, Y.F. (2019). Application of natural flavonoids to impart antioxidant and antibacterial activities to polyamide fiber for health care applications. Antioxidants, 8.10.3390/antiox8080301 ↗
7. Wang, W., Liu, Y., Ye, L., Coates, P., Caton-Rose, F., and Zhao, X. (2022). Biocompatibility improvement and controlled in vitro degradation of poly (lactic acid)-b-poly(lactide-co-caprolactone) by formation of highly oriented structure for orthopedic application. J. Biomed. Mater. Res.-Part B Appl. Biomater, 1–14.10.1002/jbm.b.35106 ↗
8. Vidakis, N., Petousis, M., Michailidis, N., Grammatikos, S., David, C.N., Mountakis, N., Argyros, A., and Boura, O. (2022). Development and Optimization of Medical-Grade MultiFunctional Polyamide 12-Cuprous Oxide Nanocomposites with Superior Mechanical and Antibacterial Properties for Cost-Effective 3D Printing. Nanomaterials, 12.10.3390/nano12030534 ↗
9. Baturynska, I. (2019). Application of machine learning techniques to predict the mechanical properties of polyamide 2200 (PA12) in additive manufacturing. Appl. Sci., 9.10.20944/preprints201903.0051.v1 ↗
10. 3D Printing of a Robust Polyamide-12-Carbon Black Composite via Selective Laser Sintering: Thermal and Electrical Conductivity10.1002/mame.201800718 ↗
11. Use of silver-based additives for the development of antibacterial functionality in Laser Sintered polyamide 12 parts10.1038/s41598-020-57686-4 ↗
12. Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling10.1108/RPJ-03-2016-0033 ↗
13. Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling10.1002/app.45332 ↗
14. Vidakis, N., Petousis, M., and Kechagias, J.D. (2022). Parameter effects and process modelling of Polyamide 12 3D-printed parts strength and toughness. Mater. Manuf. Process., 1–12.10.1080/10426914.2022.2030871 ↗
15. Feng, L., Wang, Y., and Wei, Q. (2019). PA12 Powder Recycled from SLS for FDM. Polymers, 11.10.3390/polym11040727 ↗
16. Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling10.1016/j.matdes.2017.11.027 ↗
17. Kam, M., İpekçi, A., and Şengül, Ö. (2021). Investigation of the effect of FDM process parameters on mechanical properties of 3D printed PA12 samples using Taguchi method. J. Thermoplast. Compos. Mater., 08927057211006459.10.1177/08927057211006459 ↗
18. Mechanical and cytotoxicity properties of hybrid ceramics filled polyamide 12 filament feedstock for craniofacial bone reconstruction via fused deposition modelling10.1016/j.dental.2018.09.006 ↗
19. Fused deposition modeling 3D printing of polyamide-based composites and its applications10.1016/j.coco.2020.100413 ↗
20. Vidakis, N., Petousis, M., Velidakis, E., Tzounis, L., Mountakis, N., Boura, O., and Grammatikos, S.A. (2022). Multi-functional polyamide 12 (PA12)/multiwall carbon nanotube 3D printed nanocomposites with enhanced mechanical and electrical properties. Adv. Compos. Mater., 1–25.10.1080/09243046.2022.2076019 ↗
21. Vidakis, N., Petousis, M., Tzounis, L., Velidakis, E., Mountakis, N., and Grammatikos, S.A. (2021). Polyamide 12/Multiwalled Carbon Nanotube and Carbon Black Nanocomposites Manufactured by 3D Printing Fused Filament Fabrication: A Comparison of the Electrical, Thermoelectric, and Mechanical Properties. C, 7.10.3390/c7020038 ↗
22. Vidakis, N., Petousis, M., Tzounis, L., Maniadi, A., Velidakis, E., Mountakis, N., and Kechagias, J.D. (2021). Sustainable additive manufacturing: Mechanical response of polyamide 12 over multiple recycling processes. Materials, 14.10.3390/ma14020466 ↗
23. Additive manufacturing of PA12 carbon nanotube composites with a novel laser polymer deposition process10.1002/app.50395 ↗
24. Vidakis, N., Petousis, M., Velidakis, E., Liebscher, M., Mechtcherine, V., and Tzounis, L. (2020). On the strain rate sensitivity of fused filament fabrication (Fff) processed pla, abs, petg, pa6, and pp thermoplastic polymers. Polymers, 12.10.3390/polym12122924 ↗
25. Microstructure and Mechanical Properties of Reinforced Polyamide 12 Composites Prepared by Laser Additive Manufacturing10.1108/RPJ-08-2018-0220 ↗
26. Deposition-induced effects of isotactic polypropylene and polycarbonate composites during fused deposition modeling10.1108/RPJ-12-2015-0189 ↗
27. Multiscale mechanical and tribological characterizations of additively manufactured polyamide 12 parts with different print orientations10.1016/j.jmapro.2019.03.004 ↗
28. Enhanced (thermo)mechanical properties in biobased poly(l-lactide)/poly(amide-12) blends using high shear extrusion processing without compatibilizers10.1002/pen.25426 ↗
29. The influence of nanostructure on the mechanical properties of 3D printed polylactide/nanoclay composites10.1016/j.compositesb.2018.07.005 ↗
30. Understanding and Improving Mechanical Properties in 3D printed Parts Using a Dual-Cure Acrylate-Based Resin for Stereolithography10.1002/adem.201800876 ↗
31. Enhancing the mechanical properties of 3D printed polylactic acid using nanocellulose10.1002/pen.25421 ↗
32. Petousis, M., Vidakis, N., Velidakis, E., Kechagias, J.D., David, C.N., Papadakis, S., and Mountakis, N. (2022). Affordable Biocidal Ultraviolet Cured Cuprous Oxide Filled Vat Photopolymerization Resin Nanocomposites with Enhanced Mechanical Properties. Biomimetics, 7.10.3390/biomimetics7010012 ↗
33. Additive manufacturing of multifunctional polylactic acid (PLA)—Multiwalled carbon nanotubes (MWCNTs) nanocomposites10.1080/20550324.2021.2000231 ↗
34. Vidakis, N., Petousis, M., Velidakis, E., Mountakis, N., Tsikritzis, D., Gkagkanatsiou, A., and Kanellopoulou, S. (2022). Investigation of the Biocidal Performance of Multi-Functional Resin/Copper Nanocomposites with Superior Mechanical Response in SLA 3D Printing. Biomimetics, 7.10.3390/biomimetics7010008 ↗
35. Petousis, M., Vidakis, N., Mountakis, N., Papadakis, V., Kanellopoulou, S., Gaganatsiou, A., Stefanoudakis, N., and Kechagias, J. (2022). Multifunctional Material Extrusion 3D-Printed Antibacterial Polylactic Acid (PLA) with Binary Inclusions: The Effect of Cuprous Oxide and Cellulose Nanofibers. Fibers, 10.10.3390/fib10060052 ↗
36. Fatigue fracture investigation of cemented carbide tools in gear hobbing, Part 2: The effect of cutting parameters on the level of tool stresses—A quantitative parametric analysis10.1115/1.1511173 ↗
37. Chromium carbide-CNT nanocomposites with enhanced mechanical properties10.1016/j.actamat.2008.09.023 ↗
38. Enhanced mechanical properties of nanocrystalline boron carbide by nanoporosity and interface phases10.1038/ncomms2047 ↗
39. Enhanced mechanical properties of porous titanium implants via in-situ synthesized titanium carbide in lamellar pore walls10.1016/j.ceramint.2021.11.046 ↗
40. Wang, Y., Huang, C., Li, R., Liu, H., Xu, Z., Yu, C., and Li, H. (2021). Enhanced mechanical properties of boron nitride nanosheets/copper composites with a bioinspired laminated structure. Compos. Interfaces, 1–14.10.1080/09276440.2021.1923952 ↗
41. Boron nitride nanotubes enhance mechanical properties of fibers from nanotube/polyvinyl alcohol dispersions10.1039/D1NA00677K ↗
42. Plasmon mediated deposition of Ni on Titanium Nitride nanoparticles: Applications in enhanced photoreduction of bicarbonate10.1016/j.materresbull.2022.111834 ↗
43. Optical properties and plasmonic performance of titanium nitride10.3390/ma8063128 ↗
44. Temperature-dependent optical properties of titanium nitride10.1063/1.4977840 ↗
45. Titanium nitride as a plasmonic material for visible and near-infrared wavelengths10.1364/OME.2.000478 ↗
46. Simpkins, B.S., Maximenko, S.I., and Baturina, O. (2022). Potential of TiN/GaN Heterostructures for Hot Carrier Generation and Collection. Nanomaterials, 12.10.3390/nano12050837 ↗
47. Characterization of titanium nitride thin films10.1016/0040-6090(90)90274-H ↗
48. Wear resistance investigation of titanium nitride-based coatings10.1016/j.ceramint.2015.04.152 ↗
49. Stress and strain in titanium nitride thin films10.1016/j.tsf.2009.04.020 ↗
50. High-surface-area titanium nitride nanosheets as zinc anode coating for dendrite-free rechargeable aqueous batteries10.1007/s40843-021-1974-7 ↗
51. MXenes for polymer matrix electromagnetic interference shielding composites: A review10.1016/j.coco.2021.100653 ↗
52. Titanium-Nitride Coating of Orthopaedic Implants: A Review of the Literature
53. Plasmonic Titanium Nitride Nanostructures via Nitridation of Nanopatterned Titanium Dioxide10.1002/adom.201600717 ↗
54. Additive manufacturing of Ti-Si-N ceramic coatings on titanium10.1016/j.apsusc.2015.03.184 ↗
55. Dzogbewu, T.C., and du Preez, W.B. (2021). Additive manufacturing of titanium-based implants with metal-based antimicrobial agents. Metals, 11.10.3390/met11030453 ↗
56. On the thermal and mechanical performance of Polycarbonate/Titanium Nitride nanocomposites in Material Extrusion Additive Manufacturing10.1016/j.jcomc.2022.100291 ↗
57. Morphology of sputtered titanium nitride thin films on thermoplastic polymers10.1016/S0257-8972(99)00188-7 ↗
58. Performance of chromium nitride and titanium nitride coatings during plastic injection moulding10.1016/S0257-8972(01)01690-5 ↗
59. Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications10.1016/j.jmbbm.2019.103576 ↗
60. Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing10.1016/j.apmt.2021.101253 ↗
61. Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process10.1016/j.msea.2009.01.073 ↗
62. Synthesis, Characterization, and Applications of Copper Nanoparticles10.1080/00032719.2016.1172081 ↗
63. Thermal properties of 3-D printed polylactic acid-metal composites10.1007/s40964-017-0019-x ↗
64. Tribological properties of carbon-nanotube-reinforced copper composites10.1023/A:1016662114589 ↗
65. Strain specificity in antimicrobial activity of silver and copper nanoparticles10.1016/j.actbio.2007.11.006 ↗
66. Enhancement of the mechanical properties of graphene-copper composites with graphene-nickel hybrids10.1016/j.msea.2014.01.061 ↗
67. Carbon nanotube—Cuprous oxide composite based pressure sensors10.1088/1674-1056/21/1/016102 ↗
68. 3D-printed Cu2O photoelectrodes for photoelectrochemical water splitting10.1039/D0NA00512F ↗
69. A study of the antimicrobial property of encapsulated copper oxide nanoparticles on cotton fabric10.1177/0040517510397577 ↗
70. Long-term antibacterial stable reduced graphene oxide nanocomposites loaded with cuprous oxide nanoparticles10.1016/j.jcis.2018.08.053 ↗
71. Cu2O/TiO2 decorated on cellulose nanofiber/reduced graphene hydrogel for enhanced photocatalytic activity and its antibacterial applications10.1016/j.chemosphere.2021.131731 ↗
72. High thermal stability Cu2O@OZrP micro-nano hybrids for melt-spun excellent antibacterial activity polyester fibers10.1016/j.jmst.2021.01.013 ↗
73. Antibacterial behaviors of Cu2O particles with controllable morphologies in acrylic coatings10.1016/j.apsusc.2018.09.184 ↗
74. Fabrication of monodispersed copper oxide nanoparticles with potential application as antimicrobial agents10.1038/s41598-020-73497-z ↗
75. Role of copper oxides in contact killing of bacteria10.1021/la404091z ↗
76. Synthesis and Investigation of Antimicrobial Activity of Cu2O Nanoparticles/Zeolite10.1155/2017/7056864 ↗
77. Investigations into the antibacterial behavior of copper nanoparticles against Escherichia coli10.1007/s13213-010-0015-6 ↗
78. Biomimetic antimicrobial polymers: Recent advances in molecular design10.1039/C8PY00012C ↗
79. Mechanism of antibacterial activity of copper nanoparticles10.1088/0957-4484/25/13/135101 ↗
80. A global sustainability perspective on 3D printing technologies10.1016/j.enpol.2014.08.033 ↗
81. Methods for in vitro evaluating antimicrobial activity: A review10.1016/j.jpha.2015.11.005 ↗
82. The Nephelometer: An Instrument for Estimating the Number of Bacteria in Suspensions Used for Calculating the Opsonic Index and For Vaccines10.1001/jama.1907.25320140022001f ↗
83. Permanent turbidity standards10.1128/am.15.5.1114-1121.1967 ↗
84. A Comparative Study of McFarland Turbidity Standards and the Densimat Photometer to Determine Bacterial Cell Density10.1007/s00284-015-0801-2 ↗
85. Temperature studies of polycarbonate using Fourier transform Raman spectroscopy10.1007/BF00319235 ↗
86. Nondestructive characterization of the polycarbonate-octadecylamine interface by surface enhanced Raman spectroscopy10.1016/j.polymertesting.2018.11.023 ↗
87. Probing cellulose structures with vibrational spectroscopy10.1007/s10570-018-2199-z ↗
88. 3D-printing techniques in a medical setting: A systematic literature review10.1186/s12938-016-0236-4 ↗
89. Biosensitive and antibacterial coatings on metallic material for medical applications10.1002/cbin.11604 ↗