journal article·2021-02-26Open access

Effects of Process Parameters on Structure and Properties of Melt-Blown Poly(Lactic Acid) Nonwovens for Skin Regeneration

Ewa Dzierzkowska, Anna Scisłowska-Czarnecka, Marcin Kudzin, Maciej Boguń, Piotr Szatkowski, Marcin Gajek, Kamil Kornaus, Magdalena Chadzinska, Ewa Stodolak-Zych

Abstract

Skin regeneration requires a three-dimensional (3D) scaffold for cell adhesion, growth and proliferation. A type of the scaffold offering a 3D structure is a nonwoven material produced via a melt-blown technique. Process parameters of this technique can be adapted to improve the cellular response. Polylactic acid (PLA) was used to produce a nonwoven scaffold by a melt-blown technique. The key process parameters, i.e., the head and air temperature, were changed in the range from 180–270 °C to obtain eight different materials (MB1–MB8). The relationships between the process parameters, morphology, porosity, thermal properties and the cellular response were explored in this study. The mean fiber diameters ranged from 3 to 120 µm. The average material roughness values were between 47 and 160 µm, whereas the pore diameters ranged from 5 to 400 µm. The calorimetry thermograms revealed a correlation between the temperature parameters and crystallization. The response of keratinocytes and macrophages exhibited a higher cell viability on thicker fibers. The cell-scaffold interaction was observed via SEM after 7 days. This result proved that the features of melt-blown nonwoven scaffolds depended on the processing parameters, such as head temperature and air temperature. Thanks to examinations, the most suitable scaffolds for skin tissue regeneration were selected.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Wound Healing and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomaterials and Composites, AGH University of Science and Technology, 30-059 Kraków, Poland

Department of Cosmetology, Academy of Physical Education, 31-571 Kraków, Poland

Lukasiewicz Research Network-The Textile Research Institute, 92-103 Lodz, Poland

Department of Ceramics and Refractories, AGH University of Science and Technology, 30-059 Kraków, Poland

Faculty of Biology, Institute of Zoology and Biomedical Research, Jagiellonian University, 30-387 Kraków, Poland

Funding

AGH

References (47)

Show source-provided references
1. Nanofiber Based Drug Delivery Systems for Skin: A Promising Therapeutic Approach10.1016/j.jddst.2017.07.003 ↗
2. Rahmati, M., Mills, D.K., Urbanska, A.M., Saeb, M.R., Venugopal, J.R., Ramakrishna, S., and Mozafari, M. (2020). Electrospinning for Tissue Engineering Applications. Prog. Mater. Sci., 100721.10.1016/j.pmatsci.2020.100721 ↗
3. Multifunctional Porous Membranes with Antibacterial Properties10.1080/00914037.2018.1525719 ↗
4. Meltblown Polylactic Acid Nanowebs as a Tissue Engineering Scaffold10.1097/SAP.0000000000002036 ↗
5. Ameer, J.M., PR, A.K., and Kasoju, N. (2019). Strategies to Tune Electrospun Scaffold Porosity for Effective Cell Response in Tissue Engineering. J. Funct. Biomater., 10.10.3390/jfb10030030 ↗
6. Dutton, K. (2020, November 17). Overview and Analysis of the Meltblown Process and Parameters. Available online: /paper/Overview-and-Analysis-of-the-Meltblown-Process-and-Dutton/7ca8fb5442bd680d1ced649283086bafc215b306.
7. Meltblown Polymer Fabrics as Candidate Scaffolds for Rotator Cuff Tendon Tissue Engineering10.1089/ten.tea.2016.0470 ↗
8. Effects of Poly(ϵ-Caprolactone) on Structure and Properties of Poly(Lactic Acid)/Poly(ϵ-Caprolactone) Meltblown Nonwoven
9. Rungiah, S., Ruamsuk, R., Vroman, P., Takarada, W., Appert-Collin, J.-C., and Kikutani, T. (2017). Structural Characterization of Polypropylene/Poly(Lactic Acid) Bicomponent Meltblown. J. Appl. Polym. Sci., 134.10.1002/app.44540 ↗
10. Gopanna, A., Rajan, K.P., Thomas, S.P., and Chavali, M. (2019). Chapter 6 Polyethylene and Polypropylene Matrix Composites for Biomedical Applications. Materials for Biomedical Engineering, Elsevier.10.1016/B978-0-12-816874-5.00006-2 ↗
11. Masutani, K., and Kimura, Y. (2014). Chapter 1 PLA Synthesis. From the Monomer to the Polymer. Add. Appl., 1–36.10.1039/9781782624806-00001 ↗
12. Synthesis and Characterization of Poly (Lactic Acid) for Use in Biomedical Field
13. García-Gareta, E. (2019). 5—Synthetic polymers for skin biomaterials. Biomaterials for Skin Repair and Regeneration, Woodhead Publishing.10.1016/B978-0-08-102546-8.02001-X ↗
14. Poly-Lactic Acid Synthesis for Application in Biomedical Devices—A Review10.1016/j.biotechadv.2011.06.019 ↗
15. Poly(Lactic Acid) Nanofibrous Scaffolds for Tissue Engineering10.1016/j.addr.2016.04.019 ↗
16. Processing Technologies for Poly(Lactic Acid)10.1016/j.progpolymsci.2008.05.004 ↗
17. Preparation and Characterization of PLLA/NHA Nonwoven Mats via Laser Melt Electrospinning10.1016/j.matlet.2011.12.108 ↗
18. García-Gareta, E. (2019). 2—Skin repair technology. Biomaterials for Skin Repair and Regeneration, Woodhead Publishing.10.1016/B978-0-08-102546-8.02001-X ↗
19. Modification of Chitosan Fibers with Short Peptides as a Model of Synthetic Extracellular Matrix10.1016/j.molstruc.2020.128061 ↗
20. Uyar, T., and Kny, E. (2017). 9—Electrospun biomaterials for dermal regeneration. Electrospun Materials for Tissue Engineering and Biomedical Applications, Woodhead Publishing.
21. The Combination of Meltblown Technology and Electrospinning—The Influence of the Ratio of Micro and Nanofibers on Cell Viability10.1016/j.matlet.2016.02.147 ↗
22. The Combination of Nanofibrous and Microfibrous Materials for Enhancement of Cell Infiltration and in Vivo Bone Tissue Formation10.1088/1748-605X/aa9717 ↗
23. Porous Poly(Lactic Acid) Based Fibres as Drug Carriers in Active Dressings10.37190/ABB-01548-2020-03 ↗
24. Development of a 3D Cell Culture System for Investigating Cell Interactions with Electrospun Fibers10.1002/bit.21309 ↗
25. Calendula Officinalis Extract/PCL/Zein/Gum Arabic Nanofibrous Bio-Composite Scaffolds via Suspension, Two-Nozzle and Multilayer Electrospinning for Skin Tissue Engineering10.1016/j.ijbiomac.2019.05.204 ↗
26. Tailoring the Morphology and Crystallinity of Poly(L-Lactide Acid) Electrospun Membranes10.1088/1468-6996/12/1/015001 ↗
27. Bresee, R.R., and Qureshi, U.A. (2006). Influence of Process Conditions on Melt Blown Web Structure. Part IV—Fiber Diameter. J. Eng. Fibers Fabr., 1.10.1177/155892500600100103 ↗
28. Rajendran, S. (2019). 12—Textile-based scaffolds for tissue engineering. Advanced Textiles for Wound Care, Woodhead Publishing. [2nd ed.].
29. Liu, Y., Cheng, B., and Cheng, G. (2009). Development and Filtration Performance of Polylactic Acid Meltblowns. Text. Res. J. Text Res. J., 79.
30. Chang, H.-I., and Wang, Y. (2011). Cell Responses to Surface and Architecture of Tissue Engineering Scaffolds. Regen. Med. Tissue Eng. Cells Biomater.10.5772/21983 ↗
31. Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size10.1089/ten.teb.2012.0437 ↗
32. Hammonds, R.L., Gazzola, W.H., and Benson, R.S. (2014). Physical and Thermal Characterization of Polylactic Acid Meltblown Nonwovens. J. Appl. Polym. Sci., 131.10.1002/app.40593 ↗
33. Improving Mechanical Performance of Injection Molded PLA by Controlling Crystallinity10.1002/app.27261 ↗
34. Tailoring Crystallization Behavior of Poly (l-Lactide) with a Low Molecular Weight Aliphatic Amide10.1007/s00396-015-3730-5 ↗
35. Shear Flow of Molten Polymer in Melt Blowing10.1002/pen.23079 ↗
36. Influence of Crystal and Amorphous Phase Morphology on Hydrolytic Degradation of PLLA Subjected to Different Processing Conditions10.1016/S0032-3861(00)00744-8 ↗
37. Poly(l-Lactide): 7. Enzymatic Hydrolysis of Free and Restricted Amorphous Regions in Poly(l-Lactide) Films with Different Crystallinities and a Fixed Crystalline Thickness10.1016/S0032-3861(00)00792-8 ↗
38. Development of Eco-Efficient Micro-Porous Membranes via Electrospinning and Annealing of Poly (Lactic Acid)10.1016/j.memsci.2013.02.037 ↗
39. Crystallinity Assessment and in Vitro Cytotoxicity of Polylactide Scaffolds for Biomedical Applications
40. The Role of Crystallinity on Differential Attachment/Proliferation of Osteoblasts and Fibroblasts on Poly (Caprolactone- Co -Glycolide) Polymeric Surfaces10.1007/s11706-012-0154-8 ↗
41. In Vitro Cell Response to Differences in Poly-l-Lactide Crystallinity10.1002/jbm.1996.820310102 ↗
42. The Membrane with Polylactide and Hyaluronic Fibers for Skin Substitute
43. Azimi, B., Thomas, L., Fusco, A., Kalaoglu-Altan, O.I., Basnett, P., Cinelli, P., De Clerck, K., Roy, I., Donnarumma, G., and Coltelli, M.-B. (2020). Electrosprayed Chitin Nanofibril/Electrospun Polyhydroxyalkanoate Fiber Mesh as Functional Nonwoven for Skin Application. J. Funct. Biomater., 11.10.3390/jfb11030062 ↗
44. Effect of Electrospun Fiber Diameter and Alignment on Macrophage Activation and Secretion of Proinflammatory Cytokines and Chemokines10.1021/bm200248h ↗
45. Pelipenko, J., Kocbek, P., and Kristl, J. (2014). Nanofiber Diameter as a Critical Parameter Affecting Skin Cell Response. Eur. J. Pharm. Sci. Off. J. Eur. Fed. Pharm. Sci., 66.10.1016/j.ejps.2014.09.022 ↗
46. Macrophages Modulate Engineered Human Tissues for Enhanced Vascularization and Healing10.1007/s10439-014-1156-8 ↗
47. Precisely Defined Fiber Scaffolds with 40 µm Porosity Induce Elongation Driven M2-like Polarization of Human Macrophages10.1088/1758-5090/ab5f4e ↗