journal article·2017-11-01Open access

Evaluation of PBS Treatment and PEI Coating Effects on Surface Morphology and Cellular Response of 3D-Printed Alginate Scaffolds

María Mendoza García, Mohammad Izadifar, Xiongbiao Chen

Abstract

Three-dimensional (3D) printing is an emerging technology for the fabrication of scaffolds to repair/replace damaged tissue/organs in tissue engineering. This paper presents our study on 3D printed alginate scaffolds treated with phosphate buffered saline (PBS) and polyethyleneimine (PEI) coating and their impacts on the surface morphology and cellular response of the printed scaffolds. In our study, sterile alginate was prepared by means of the freeze-drying method and then, used to prepare the hydrogel for 3D printing into calcium chloride, forming 3D scaffolds. Scaffolds were treated with PBS for a time period of two days and seven days, respectively, and PEI coating; then they were seeded with Schwann cells (RSC96) for the examination of cellular response (proliferation and differentiation). In addition, swelling and stiffness (Young’s modulus) of the treated scaffolds was evaluated, while their surface morphology was assessed using scanning electron microscopy (SEM). SEM images revealed significant changes in scaffold surface morphology due to degradation caused by the PBS treatment over time. Our cell proliferation assessment over seven days showed that a two-day PBS treatment could be more effective than seven-day PBS treatment for improving cell attachment and elongation. While PEI coating of alginate scaffolds seemed to contribute to cell growth, Schwann cells stayed round on the surface of alginate over the period of cell culture. In conclusion, PBS-treatment may offer the potential to induce surface physical cues due to degradation of alginate, which could improve cell attachment post cell-seeding of 3D-printed alginate scaffolds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Departamento de Bioingeniería, Escuela de Ingeniería y Ciencias, Instituto Tecnológico y de Estudios Superiores de Monterrey Campus Estado de México, 52926 Cd López Mateos, Estado de México, Mexico

Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, SK S7N5A9, Canada

Department of Surgery, College of Medicine, University of Saskatchewan, Saskatoon, SK S7N5E5, Canada

Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, SK S7N5A9, Canada

References (40)

Show source-provided references
1. 3D Printing for tissue engineering10.1002/ijch.201300086 ↗
2. You, F., Eames, B., and Chen, X.B. (2017). Application of extrusion-based hydrogel bioprinting for cartilage tissue engineering. Int. J. Mol. Sci., 18.10.3390/ijms18071597 ↗
3. A Brief Review of Extrusion-based Tissue Scaffold Bio-Printing10.1002/biot.201600671 ↗
4. Host response to tissue engineered devices10.1016/S0169-409X(98)00023-4 ↗
5. Biomaterials & scaffolds for tissue engineering10.1016/S1369-7021(11)70058-X ↗
6. Scaffolds in tissue engineering bone and cartilage10.1016/S0142-9612(00)00121-6 ↗
7. Engineering Algiante as Bioink for Bioprinting10.1016/j.actbio.2014.06.034 ↗
8. Axpe, E., and Oyen, M. (2016). Applications of Alginate-Based Bioinks in 3D Bioprinting. Int. J. Mol. Sci., 17.10.3390/ijms17121976 ↗
9. Influence of Flow Behavior of Alginate-Cell Suspension on Cell Viability and Proliferation10.1089/ten.tec.2016.0011 ↗
10. Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation10.1038/srep24474 ↗
11. Bioprinting Pattern-Dependent Electrical/Mechanical Behavior of Cardiac Alginate Implants: Characterization and Ex Vivo Phase-Contrast Microtomography Assesment10.1089/ten.tec.2017.0222 ↗
12. Izadifar, M., Chapman, D., Babyn, P., Chen, X.B., and Kelly, M. (2017). UV-assisted 3D Bioprinting of Nano-reinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering. Tissue Eng. Part C Methods, in press.10.1089/ten.tec.2017.0346 ↗
13. Preparation and characterization of alginate microspheres for sustained protein delivery within tissue scaffolds10.1088/1758-5082/5/1/015009 ↗
14. Peripheral nerve tissue engineering: Autologous Schwann cells vs. transdifferentiated mesenchymal stem cells10.1089/ten.2006.12.1451 ↗
15. Novel crosslinked alginate/hyaluronic acid hydrogels for nerve tissue engineering10.1007/s11706-013-0211-y ↗
16. Gu, X., Ding, F., Yang, Y., and Liu, J. (2015). Chapter 5—Tissue Engineering in Peripheral Nerve Regeneration. Prog. Brain Res., 73–99.10.1016/B978-0-12-801732-6.00005-7 ↗
17. Prospects of peripheral nerve tissue engineering using nerve guide conduits based on silk fibroin protein and other biopolymers
18. Autogenous venous graft with one-stage prepared Schwann cells as a conduit for repair of long segmental nerve defects10.1055/s-2002-30186 ↗
19. Battiston, B., Raimondo, S., Tos, P., Gaidano, V., Audisio, C., Scevola, A., Perroteau, I., and Guena, S. (2009). Tissue engineering of peripheral nerves. Int. Rev. Neurobiol., 227–249.10.1016/S0074-7742(09)87011-6 ↗
20. 3D Printing of Alginate/gelatin Hydrogel Scaffolds and Their Mechanical-Property Characterization10.1080/00914037.2016.1201830 ↗
21. An In Vitro Study of Peptide-Loaded Alginate Nanospheres for Antagonizing the Inhibitory Effect of Nogo-A Protein on Axonal Growth10.1088/1748-6041/10/4/045016 ↗
22. An Alginate-based Platform for Cancer Stem Cell Research10.1016/j.actbio.2016.04.032 ↗
23. Bioplotting Alginate-Hyaluronic Acid Hydrogel Scaffolds with Structural Integrity and Preserved Schwann Cell Viability10.1089/3dp.2014.0006 ↗
24. Alginate: Properties and biomedical applications10.1016/j.progpolymsci.2011.06.003 ↗
25. Fang, R., Tian, W.M., and Chen, X.B. (2017). Synthesis of injectable alginate hydrogels with muscle-derived stem cells for potential myocardial infarction repair. Appl. Sci., 7.10.3390/app7030252 ↗
26. A rapid-curing alginate gel system: Utility in periosteum-derived cartilage tissue engineering10.1016/j.biomaterials.2003.07.002 ↗
27. Use of the polycation polyethyleneimine to improve the physical properties of alginate-hyaluronic acid hydrogel during fabrication of tissue repair scaffolds10.1080/09205063.2015.1016383 ↗
28. Polyethyleneimine and polyethyleneimine-base nanoparticles: Novel bacterial and yeast biofilm inhibitors10.1099/jmm.0.069609-0 ↗
29. Molecular weight-dependent gene transfection activity of unmodified and galactosylated polyethyleneimine on hepatoma cells and mouse liver10.1016/S1525-0016(02)00053-9 ↗
30. Investigation of swelling/degradation behaviour of alginate beads crosslinked with Ca2+ and Ba2+ ions10.1016/j.reactfunctpolym.2004.01.002 ↗
31. Controlling the porosity and microarchitecture of hydrogels for tissue engineering10.1089/ten.teb.2009.0639 ↗
32. Freeze-dried agarose scaffolds with uniaxial channels stimulate and guide linear axonal growth following spinal cord injury10.1016/j.biomaterials.2005.06.039 ↗
33. Waxman, S.G., Kocsis, J.D., and Stys, P.K. (1995). The Schwann cell: Morphology and development. The Axon: Structure, Function and Pathophysiology, Oxford University Press.10.1093/acprof:oso/9780195082937.001.0001 ↗
34. Characterizing the viscoelastic properties of thin hydrogel-based constructs for tissue engineering applications10.1098/rsif.2005.0065 ↗
35. Scaffolding in tissue engineering: General approaches and tissue specific considerations10.1007/s00586-008-0745-3 ↗
36. Structural properties of scaffolds: Crucial parameters towards stem cells differentiation10.4252/wjsc.v7.i4.728 ↗
37. Theoretical Description of Hydrogel Swelling: A review
38. Nazemi, K., Moztarzadeh, F., Jalali, N., Asgari, S., and Mozafari, M. (2014). Synthesis and Characterization of Poly(lactic-co-glycolic) Acid Nanoparticles-Loaded Chitosan/Bioactive Glass Scaffolds as a Localized Delivery System in the Bone Defects. Biomed. Res. Int.10.1155/2014/898930 ↗
39. El-Sherbiny, I., and Yacoub, M. (2013). Hydrogel scaffolds for tissue engineering: Progress and challenges. Glob. Cardiol. Sci. Pract., 316–342.10.5339/gcsp.2013.38 ↗
40. Jaffray, D. (2015, January 7–12). A synchrotron radiation microtomography study of wettability and swelling of nanocomposite Alginate/Hydroxyapatite scaffolds for bone tissue engineering. Proceedings of the World Congress on Medical Physics and Biomedical Engineering, Toronto, ON, Canada.